collapse

Advertisement


Author Topic: Is Anyone Loading Their Own 10MM??  (Read 4445 times)

Offline actionshooter

  • Past Sponsor
  • Trade Count: (+3)
  • Old Salt
  • *****
  • Join Date: Apr 2007
  • Posts: 5760
  • Location: Olympia/Okanogan
    • https://www.instagram.com/steve.bell.actionshooter/
Re: Is Anyone Loading Their Own 10MM??
« Reply #15 on: August 14, 2021, 10:21:07 AM »
I like the 200gr bullet from Montana Bullet Works over Alliant 2400. I've shot this combo in a few different 10mm pistols with good results. Start at 9.5gr and work up until the gun tells you to stop. I'm at 1275fps with 11.5gr of 2400 in a 5" Kimber with a 22# variable weight recoil spring, 28# hammer spring, and a flat-bottom firing pin stop. I don't know if I'd go that high in a Glock or other stock pistol though.

https://www.montanabulletworks.com/product/10mm-noe-200gr-wfn-pb/

I am looking at those... probably will be the way I go but have you ever tried the 220s? I have not been able to figure out who is making them.

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3310
  • Location: Yelm
  • Preferred pronouns: were/was
Re: Is Anyone Loading Their Own 10MM??
« Reply #16 on: August 15, 2021, 04:26:24 PM »
I played with the Cast Performance 220gr in both of my 10’s and wasn’t happy with them. They never penetrated in a straight line, always veering off course a couple inches into whatever I was shooting. The 220s are ridiculously long and I don’t think most guns are properly stabilizing them. I think I have a couple hundred of the 220 on my shelf if you want to try some.

For comparison, these are unfired and recovered bullets shot into 20% gel blocks. That’s a 200gr from Montana Bullet Works, a 152gr bullet I had Hammer make for me, the Cast Performance 220gr and a 180gr XTP.

Offline actionshooter

  • Past Sponsor
  • Trade Count: (+3)
  • Old Salt
  • *****
  • Join Date: Apr 2007
  • Posts: 5760
  • Location: Olympia/Okanogan
    • https://www.instagram.com/steve.bell.actionshooter/
Re: Is Anyone Loading Their Own 10MM??
« Reply #17 on: September 21, 2021, 09:28:22 PM »
OK, starting the load testing and am going to use Longshot (only powder I could find), 200gr Montana Hardcast, Starline Brass and winchester primers.... Has anyone used the Longshot for a similar load?   I'll post results soon.
BTW.... this will be in a G20

Offline dreadi

  • Business Sponsor
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Aug 2016
  • Posts: 1066
  • Location: Tacoma
    • http://www.facebook.com/blackhammerarms
    • Black Hammer Arms
Re: Is Anyone Loading Their Own 10MM??
« Reply #18 on: December 15, 2021, 10:05:02 PM »
BLACK HAMMER ARMS
Buy A Suppressor http://www.silencershop.com/blackhammerarms
1911 Pistolsmithing
Firearm Refinishing
GLOCK Certified Armorer
CMMG Authorized Dealer
NEMO Arms Authorized Dealer
http://www.blackhammerarms.com
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms/

Offline duckmen1

  • Non-Hunting Topics
  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Jun 2009
  • Posts: 2422
  • Location: outdoors
Re: Is Anyone Loading Their Own 10MM??
« Reply #19 on: December 15, 2021, 10:59:23 PM »
If any 10mm brass is needed feel free to pm me and I will get you some details on what I have for a bit more reasonable price then you will find it for elsewhere. I have a fair amount.
Maturity is when you have the power to destroy someone who did you wrong but instead you breathe, walk away, and let life take care of them.

 


* Advertisement

* Recent Topics

Springer 2024 Columbia River by Blacklab
[Today at 02:35:54 PM]


Springer Fishing Opportunity 3/29 & 3/30 by Blacklab
[Today at 12:48:56 PM]


Long Beach Clamming Tides by dilleytech
[Today at 12:39:19 PM]


Let’s see your best Washington buck by abhold87
[Today at 12:03:27 PM]


Bearpaw Season - Spring 2024 by bearpaw
[Today at 11:45:41 AM]


Walked a cougar down by Rainier10
[Today at 11:17:49 AM]


SB 5444 signed by Inslee on 03/26 Takes Effect on 06/06/24 by hughjorgan
[Today at 09:03:26 AM]


Average by lhrbull
[Today at 07:31:56 AM]


CVA optima V2 LR tapped hole for front sight by Remdawg
[Today at 07:09:22 AM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal