collapse

Advertisement


Author Topic: Triplel 7 Issues  (Read 4421 times)

Offline bb76

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jul 2014
  • Posts: 296
  • Location: Tacoma
Triplel 7 Issues
« on: October 06, 2022, 12:31:26 PM »
Figured I would reach out to the brain trust and see if anyone has any ideas. Ran through 3 Winchester Magnum caps and a CCI  on a T/C Hawken with no ignition. Ended up pulling the bullet and doing a deep clean on the gun.

Thanks

Sent from my SM-G781V using Tapatalk


Offline huntnfmly

  • Trade Count: (+36)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4728
Re: Triplel 7 Issues
« Reply #1 on: October 06, 2022, 12:38:29 PM »
Plugged nipple?
I'm your dam tour guide Arnie please don’t wonder off the dam tour.
Take as many dam pictures as you want ....
Are there any dam questions ..

Offline h2ofowlr

  • CHOKED UP TIGHT
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 9125
  • Location: In the "Blind"! Go Cougs!
Re: Triplel 7 Issues
« Reply #2 on: October 06, 2022, 12:53:22 PM »
Plugged nipple?

Has to be a plugged nipple.  Tripple 7 is pretty good.  I have noticed the 209 primer can really foul the peep hole.  I end up cleaning it with a paperclip after the 2nd shot.  Pipe cleaner also works.
Cut em!
It's not the shells!  It's the shooter!

Offline bb76

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jul 2014
  • Posts: 296
  • Location: Tacoma
Re: Triplel 7 Issues
« Reply #3 on: October 06, 2022, 08:08:36 PM »
Thanks!

Sent from my SM-G781V using Tapatalk


Offline Dirty Mike

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Apr 2009
  • Posts: 952
  • Location: Roy, Wa
  • Co-founder of Team Dogleg
Re: Triplel 7 Issues
« Reply #4 on: October 30, 2022, 12:15:02 AM »
We're you using loose?

Offline callturner

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Jun 2020
  • Posts: 768
  • Location: nine mile falls Washington
    • n/a
  • Groups: nra
Re: Triplel 7 Issues
« Reply #5 on: October 30, 2022, 03:35:26 AM »
After cleaning, I use a handheld steam cleaner and you would not believe what comes out. Look up Idaho Lewis on YouTube. He is the Hawkin Guru. He will show you how to correct all of your problems with those type of rifles.

Online CP

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Mar 2008
  • Posts: 7178
  • Location: Mukilteo
Re: Triplel 7 Issues
« Reply #6 on: October 30, 2022, 05:55:56 AM »
After cleaning, I run a clean patch down the bore and pop a cap or 2 into that patch before I load it.  That clears any oil, cleaner, water, or other gunk out of the nipple.   

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Re: Triplel 7 Issues
« Reply #7 on: October 30, 2022, 09:21:42 AM »
 bb76, suggestion, when you pore the loose T7 powder in the barrel tip the rifle to the side of the nipple.  Then tap the side of barrel to move the powder out of the pit in the breech out and under the nipple.  T7 is more difficult to ignite than real BP or even the Pyros, so I would suggest that you use Magnum #11 caps.

« Last Edit: October 30, 2022, 09:28:48 AM by Sabotloader »
Keep shooting muzzleloaders - They are a blast!!

Offline bb76

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jul 2014
  • Posts: 296
  • Location: Tacoma
Re: Triplel 7 Issues
« Reply #8 on: October 30, 2022, 10:30:08 AM »
Thanks for all of the responses. I will definitely try these out.

Sent from my SM-G781V using Tapatalk


Offline deadyote

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Jan 2010
  • Posts: 296
  • Location: Puyallup, WA
Re: Triplel 7 Issues
« Reply #9 on: November 01, 2022, 12:11:03 PM »
I had the same issue with Triple 7 pellets years ago, while at the range.  An old time muzzleloader guy come over and asks if I'm shooting loose powder or pellets.  I said Pellets and he responded by saying that whatever the binding agent that is in the pellets can absorb moisture enough that it will not ignite.  My Triple 7 was only 2 months old and I keep it in a ziploc bag in my safe.  I haven't used pellets, since and have never had an issue with loose powder.  Just my 2 cents.

Offline riverrun

  • Non-Hunting Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Mar 2010
  • Posts: 157
  • Location: Yakima
Re: Triplel 7 Issues
« Reply #10 on: November 01, 2022, 09:59:17 PM »
I shoot 100 grains of loose powder triple 7 under a 300 grain bullet and have had very good results out of my cva accura v2!

 


* Advertisement

* Recent Topics

Roadless Rule Public Comment by cjjcb
[Today at 08:43:33 AM]


Eggs. by h2ofowlr
[Today at 08:25:25 AM]


Vortex scope by Boss .300 winmag
[Today at 08:18:54 AM]


This sucks by HUNTIN4SIX
[Today at 07:04:34 AM]


Nosler vs Hornady by Pathfinder101
[Today at 06:52:00 AM]


Chronic wasting testing in NE Washington by hunter399
[Today at 06:47:50 AM]


Cow with pedicales by BlackRiverLabradors
[Today at 12:05:40 AM]


MA-10 Coho by firtree
[Today at 12:00:33 AM]


Brother's Ram by huntnphool
[Yesterday at 10:32:34 PM]


Grouse During Deer Season by BLH69
[Yesterday at 10:15:51 PM]


High Hunt by pd
[Yesterday at 09:41:47 PM]


Taneum Elk Cow tag porblem by Hiker82
[Yesterday at 09:34:20 PM]


Tagged out in Oregon by kodiak06
[Yesterday at 08:18:01 PM]


5 Points......(mule deer or blacktails) by Boss .300 winmag
[Yesterday at 06:29:21 PM]


Major Changes coming to Idaho for Non-Resident Hunters by harveymarv
[Yesterday at 06:29:16 PM]


AWD – getting unstuck? by branches
[Yesterday at 05:31:10 PM]


Curious on you thought about this “tip” by huntnnw
[Yesterday at 05:19:09 PM]


Big J's Powder list by BigJs Outdoor Store
[Yesterday at 02:18:09 PM]


Douglas 108 Moose tag by Bonehuntn
[Yesterday at 01:41:03 PM]


2021 bear had been previously shot before I killed him by C-Money
[Yesterday at 09:46:07 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal