collapse

Advertisement


Author Topic: Jon Boat Pod thoughts?  (Read 7766 times)

Offline Happy Gilmore

  • Business Sponsor
  • Trade Count: (+1)
  • Old Salt
  • *****
  • Join Date: Jul 2008
  • Posts: 5135
  • Location: Ronan, MT
Jon Boat Pod thoughts?
« on: March 23, 2025, 12:21:49 PM »
I picked up a 14' Alumacraft jon boat. Plan to use it for lake fishing when it's too windy or, bigger lakes and the river.

I've seen add on pods. Seems like a good idea. I'm planning on finding a 15hp for it. That's the max HP allowed where I'm at now. (Flathead River)

Any recommendations? I've seen some can bolt on. I've seen some that says they can be bolted or welded.

Thoughts?
"Far better it is to dare mighty things, to win glorious triumphs, even though checked by failure, than to take rank with those poor spirits who neither enjoy much nor suffer much, because they live in the grey twilight that knows not victory nor defeat."
Theodore Roosevelt 1899

Offline Sakko300wsm

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Dec 2015
  • Posts: 1149
  • Location: Lynden
  • Groups: Sakko300wsm
Re: Jon Boat Pod thoughts?
« Reply #1 on: March 23, 2025, 12:59:39 PM »
I would definitely go welded

Offline Stein

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Explorer
  • ******
  • Join Date: Sep 2013
  • Posts: 12975
  • Location: Arlington
Re: Jon Boat Pod thoughts?
« Reply #2 on: March 23, 2025, 01:07:13 PM »
I would also go welded, any time I have drilled into a transom I have wished I didn't unless you don't plan on keeping the boat long term.  Water always creeps in no matter how careful you are and you'll be drilling below the waterline for sure.

Offline Born2late

  • Non-Hunting Topics
  • Trade Count: (+21)
  • Longhunter
  • *****
  • Join Date: Nov 2012
  • Posts: 781
Re: Jon Boat Pod thoughts?
« Reply #3 on: March 23, 2025, 02:45:14 PM »
I would probably make out riggers that bolt on easily to hold the pods that way they are removable for when you don’t want them on there. Also if you’re hauling the boat on a trailer how will the pods interfere with it will determine what you can do. If you’re hauling it I would make some quick change mounts so the pods will slip in and secure in seconds. I did something similar to a canoe I shipped to Alaska to fish for silvers with and it worked awesome, until it blew away in a 90 mph wind storm and went out to sea.
Any holes you put through the side use 5200 sealant on when assembling it to seal it.

Offline Happy Gilmore

  • Business Sponsor
  • Trade Count: (+1)
  • Old Salt
  • *****
  • Join Date: Jul 2008
  • Posts: 5135
  • Location: Ronan, MT
"Far better it is to dare mighty things, to win glorious triumphs, even though checked by failure, than to take rank with those poor spirits who neither enjoy much nor suffer much, because they live in the grey twilight that knows not victory nor defeat."
Theodore Roosevelt 1899

Offline Born2late

  • Non-Hunting Topics
  • Trade Count: (+21)
  • Longhunter
  • *****
  • Join Date: Nov 2012
  • Posts: 781
Re: Jon Boat Pod thoughts?
« Reply #5 on: March 23, 2025, 04:09:24 PM »
Ok, scratch what I just said. I was thinking of pontoons on the side to stabilize and add floatation

Offline storyteller

  • Forum Sponsor
  • Trade Count: (+14)
  • Scout
  • *****
  • Join Date: Jun 2014
  • Posts: 314
  • Location: Marysville
  • Groups: NRA, DU
Re: Jon Boat Pod thoughts?
« Reply #6 on: March 23, 2025, 04:30:22 PM »
Those backwater pods look a lot like Beavertail pods, if you google  them, there was a person with a video who used 3M 5200 on  a 100% fay surface seal and proper prep.  After cured, it shows him jumping on them, and  they do not come  off, might check it out as a way to leak proof your installation.    Good luck

Offline Happy Gilmore

  • Business Sponsor
  • Trade Count: (+1)
  • Old Salt
  • *****
  • Join Date: Jul 2008
  • Posts: 5135
  • Location: Ronan, MT
Re: Jon Boat Pod thoughts?
« Reply #7 on: March 23, 2025, 04:48:11 PM »
Ok, scratch what I just said. I was thinking of pontoons on the side to stabilize and add floatation

I was wondering 😀 years ago there used to be a guy who fished above chief jo dam with a canoe. He had outriggers made from large irrigation pipe with ends capped at a nice angle. Used square aluminum tubing he bent to make the frame to attach to the canoe. It was slick.
"Far better it is to dare mighty things, to win glorious triumphs, even though checked by failure, than to take rank with those poor spirits who neither enjoy much nor suffer much, because they live in the grey twilight that knows not victory nor defeat."
Theodore Roosevelt 1899

Offline Happy Gilmore

  • Business Sponsor
  • Trade Count: (+1)
  • Old Salt
  • *****
  • Join Date: Jul 2008
  • Posts: 5135
  • Location: Ronan, MT
Re: Jon Boat Pod thoughts?
« Reply #8 on: March 23, 2025, 04:49:18 PM »
Those backwater pods look a lot like Beavertail pods, if you google  them, there was a person with a video who used 3M 5200 on  a 100% fay surface seal and proper prep.  After cured, it shows him jumping on them, and  they do not come  off, might check it out as a way to leak proof your installation.    Good luck

Will look for that video. I know 5200 is permanent.
"Far better it is to dare mighty things, to win glorious triumphs, even though checked by failure, than to take rank with those poor spirits who neither enjoy much nor suffer much, because they live in the grey twilight that knows not victory nor defeat."
Theodore Roosevelt 1899

 


* Advertisement

* Recent Topics

Looking for Solid 22 LR input by EnglishSetter
[Today at 03:13:54 PM]


WSTA 2025 Summer Rendezvous Agenda by Humptulips
[Today at 03:09:35 PM]


Fullsized Truck Opinion: HiMiNew vs LoMiOlder by rainshadow1
[Today at 03:01:42 PM]


2025 Montana alternate list by JBar
[Today at 02:20:40 PM]


Rotator Cuff repair X 2 advice needed by Wood2Sawdust
[Today at 01:36:26 PM]


Rock creek gone? Next? by JBar
[Today at 01:00:56 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by teanawayslayer
[Today at 12:45:43 PM]


Archery elk gear, 2025. by pcveen
[Today at 09:35:38 AM]


2025 Canning by blackpowderhunter
[Today at 07:19:25 AM]


Lynx kittens confirmed in the Kettle Range by dwils233
[Today at 12:04:14 AM]


How To Get Your $0.00 Tax Stamp - Black Hammer Arms by dreadi
[Yesterday at 11:33:25 PM]


Seeking recommendations on a new scope by Klickitatsteelie
[Yesterday at 09:23:56 PM]


First attempt at polish sausages by Stein
[Yesterday at 07:58:22 PM]


Sockeye Numbers by Southpole
[Yesterday at 07:44:30 PM]


Best all around muzzy (updated) by jjhunter
[Yesterday at 07:44:26 PM]


38% increase in fishing and hunting licenses by Sitka_Blacktail
[Yesterday at 07:02:41 PM]


50 inch SXS and Tracks? by 92xj
[Yesterday at 05:34:03 PM]


3 days for Kings by MADMAX
[Yesterday at 05:06:49 PM]


Full moon and last week of September by pd
[Yesterday at 04:51:23 PM]


Hunting bears in the thick stuff by ghosthunter
[Yesterday at 04:33:46 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal