how to repair leaky waders

[Dadbear]

Lets hear your best tips for stopping leaks in both neoprene and breathable wading boots.

[bankwalker]

i have always used rubber cement on my leaks with breathables. never any patches or anything like that. just plain rubber cement, and have never had a problem. same goes for seam leaks aswell.

also after a couple years of wearing the same breathables and not taking care of them properly. you can take some spray on waterproofing and give the waders a couple good coats of the spray and let them sit for a couple days. they will be like new. *note* at least mine were like new 

[Intruder]

auqa seal.... thin it w/ cotol-240

[Dadbear]

Thanks for the help. Nothin' worse than freezin' feet in the winter.

[jackelope]

i have used goop and aquaseal, also simmseal...the best repair i have come up with so far is a new pair of waders.
 

[robodad]

Best I have used is "shoe goo" and place a small piece of the neoprene fabric on the inside and outside of the hole, just don't be shy with the goo smooth out the edges then let it dry !!!

I have repaired a 2 inch "L" shaped gash this way and it still don't leak !!

[stumprat]

Wader patch kit? ! 

[billythekidrock]

Hot glue. The type for fixing fishing rods.

[klickriverchromer]

A new pair You can hang them outside and fill the inside w/ water, then just mark the moist spots w/marker or something.  Let dry. then apply some repair glue.  i like to use a fair amount because i like to put a patch on it aswell, some don't.