collapse

Advertisement


Author Topic: Deer Feeder  (Read 3412 times)

Offline sweetlou

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Aug 2011
  • Posts: 137
  • Location: gig harbor
Deer Feeder
« on: March 01, 2014, 10:30:20 PM »
I'm looking to make a deer feeder. I'm also not looking for people to debate baiting and not, thanks.
I wanted a few ideas. I have access to steel drums, or rain barrels. couple issues I've thought about:
1. There are a lot of bears in the area and although I don't mind them eating what i'll have out there I'm more concerned about them knocking it over. (My plan was to set it up on a tripod)
2. squirrels! How should I set up the feeding. Holes in the bottom and let gravity do the work? or should I buy the electric feeder that throws it out and buy a rodent guard? Or I found this, http://hunt-missouri-whitetails.com/Gravity_Feeder/gravity_feeder.html
Let me know what you think or if you've built one, what your experience was.

And yes I know, I won't be shooting a bear that comes in to eat.

Thanks

Offline mkcj

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Jul 2007
  • Posts: 1945
  • Location: Seatac/Winthrop,Wash
Re: Deer Feeder
« Reply #1 on: March 01, 2014, 11:25:59 PM »
12" corrugated pipe 5 feet long with a few small holes in the bottom right at ground level and a lid, camo it up(branches,paint) secure it to a tree. will hold about 200 pounds of feed.

Offline KFhunter

  • Non-Hunting Topics
  • Trade Count: (0)
  • Legend
  • ******
  • Join Date: Jan 2011
  • Posts: 34512
  • Location: NE Corner
Re: Deer Feeder
« Reply #2 on: March 01, 2014, 11:41:04 PM »
You going to put this close to your house on private ground or out in the woods somewhere and won't be able to check it very often?

Offline Jeeper

  • Non-Hunting Topics
  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Sep 2011
  • Posts: 84
  • Location: Salmon Creek, WA
Re: Deer Feeder
« Reply #3 on: March 02, 2014, 06:54:26 AM »
Check out 'Nudge Feeder'  You can make one. I bought one made by Wild  Game. Works great.

Offline sweetlou

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Aug 2011
  • Posts: 137
  • Location: gig harbor
Re: Deer Feeder
« Reply #4 on: March 02, 2014, 03:33:50 PM »
Its going to be on my brother property. I'll be able to check and refill every other week or so. but yes, private property.

Did you see good results with the nudge feeder? That's a pretty neat idea.

Offline Whitehunter

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2012
  • Posts: 40
  • Location: Omak, wa
Re: Deer Feeder
« Reply #5 on: March 02, 2014, 06:32:09 PM »
I bought a automatic corn feeder at cabelas.  It's the 225lb style corn trower.  I have it set up to go off at 2:30 every day for 7 seconds.  Full container lasts me about 4 months.  I bought the hanging kind.  No issues yet and it's plastic so chipmunks would just fall off.  They just probably eat left overs that chuckers or deer don't finish.  No bear issues either so far.  I had to tie it to the tree tho that is cause wind pushed it around and I was feeding more then I wanted.  Also a good scouting camera will tell u changes to be made if any.
Killem n grill em!

Offline huntnnw

  • Non-Hunting Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2010
  • Posts: 9613
  • Location: Spokane
Re: Deer Feeder
« Reply #6 on: March 02, 2014, 09:51:58 PM »
Id mount a pully up high and hang it with a small cable or a good rope! I would not use a tripod in area with bears they will knock it over and destroy it! I had the same idea and put mine against a big tree and used a ratcheting tie down to the tree to keep them from knocking it over. Short story later they climbed on top of it and crushed it  :chuckle:

Offline tonymiller7

  • Non-Hunting Topics
  • Trade Count: (+8)
  • Longhunter
  • *****
  • Join Date: Jun 2013
  • Posts: 701
  • Location: Lakewood, wa
Re: Deer Feeder
« Reply #7 on: March 03, 2014, 06:56:55 AM »
Definitely don't use a tripod, bears will knock it over really quick.  I've made a couple PVC gravit feeders and a couple of hanging drum feeders.  I'm still trying to figure out how to cone the bottom of my drum feeders as I used bung tops, so there is no easy access to the inside.  Maybe spray foam and smooth it out with a stick from the hole in the bottom???

Offline Whitehunter

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Feb 2012
  • Posts: 40
  • Location: Omak, wa
Re: Deer Feeder
« Reply #8 on: March 03, 2014, 11:29:14 AM »
I pull mine up empty and then I use a ladder to fill it up.  Way easier then trying to pull it up full with a wheeler.  I made that mistake just once.  Lol
Cabelas has cheap feeders that work.  They also sell everything separately if u just want the motor for example.  Easy to install also.
I would use sheet metal for your cone bolt it on and caulk the edges. 
Killem n grill em!

 


* Advertisement

* Recent Topics

Idaho 2025 Controlled Hunts by Naches Sportsman
[Today at 02:09:50 PM]


Boat registration by pickardjw
[Today at 02:09:11 PM]


Entiat Quality tag by waoutdoorsman
[Today at 01:46:58 PM]


Mudflow Archery by MADMAX
[Today at 01:43:49 PM]


Oregon special tag info by Tree Killer
[Today at 01:40:51 PM]


Palouse/Mica (GMU 127) Access for Trades Work by 6haase6
[Today at 01:40:02 PM]


Rehome for GWP by Special T
[Today at 01:27:38 PM]


Vashon Island deer tag by Bob33
[Today at 01:20:05 PM]


Cowiche Cow Archery Tag - Group Hunt by VickGar
[Today at 12:45:06 PM]


Ritzville Rifle Buck - GMU 284 by Sundance
[Today at 12:37:11 PM]


Eastern WA-WT hunting from tree stands?? by finnman
[Today at 12:28:44 PM]


Oregon results posted. by finnman
[Today at 12:23:59 PM]


Stillaguamish 448 QD rifle tag by Hi-Liter
[Today at 12:06:37 PM]


Muzzy Mission Quality!!! by finnman
[Today at 11:54:18 AM]


Colockum Archery Bull Tag by throttlejocky20
[Today at 11:27:12 AM]


For the Vortex guys by pianoman9701
[Today at 11:23:45 AM]


Teanaway bull elk by throttlejocky20
[Today at 11:23:44 AM]


Palouse buck deer by MMCCAULEY
[Today at 11:09:55 AM]


2025 OILS! by HillHound
[Today at 10:25:46 AM]


Awesome customer service by Stein
[Today at 10:22:51 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal