collapse

Advertisement


Author Topic: help  (Read 2259 times)

Offline jdb

  • the illustious potentate
  • Non-Hunting Topics
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Jul 2007
  • Posts: 3785
  • Location: selah
help
« on: July 18, 2008, 02:20:28 PM »
I am thinking of buying a new coyote calling rifle. The Remington predator, for those not familiar it comes covered in mossy oak brush. My question is what would be the best scope to put on it that would match the finish of the rifle? No suggestions to paint plz I have no interest in that thanx JB
nuke the gray whales for jesus!

Offline Bscman

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jan 2008
  • Posts: 620
  • Location: Sedro Woolley
Re: help
« Reply #1 on: July 18, 2008, 02:22:12 PM »
If paint isn't an option (Duracoat is good stuff!) you can get a scope camo-dipped--the same process used to camo most rifles/shotguns--by any one of DOZENS of companies.
It's not always cheap, though.
I left it better than I found it...did you?
I hunt animals because veggies are too easy to stalk.

Offline Intruder

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2007
  • Posts: 1722
  • Location: Spo-Vegas
Re: help
« Reply #2 on: July 18, 2008, 02:49:15 PM »
I'm not sure I'm fully understanding what you want to achieve.  From a pure functionality state you could probably just get a matt black and be good to go.  If you really want to match it then the dipping is probably the only way to go.  Not sure if there are any manufacturers using that camo on any of their scopes.  Camo tape may get you close to a match. 

I guess I would be more concerned with the quality of the optics, etc than the finish matchin the gun... hence my matt black comment.  Not sure you'd really get the payback on trying to make it match in terms of hunting results but it would look cool.     :twocents:

Offline Sagedawg

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Nov 2007
  • Posts: 657
  • Location: Spokane
Re: help
« Reply #3 on: July 18, 2008, 05:01:09 PM »
JB, you could look at getting it dipped with the same camo pattern as the gun has. I know they do scopes and rings etc, but it is at your risk. They make you sign a waiver relaseing them from liability. A buddy had one of his done and he hasnt had any problems. Something to think about.


  Sage

Offline jdb

  • the illustious potentate
  • Non-Hunting Topics
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Jul 2007
  • Posts: 3785
  • Location: selah
Re: help
« Reply #4 on: July 19, 2008, 07:13:08 AM »
I guess I should have been more clear what I am looking for is does anyone know of a good quality scope that comes in a camo finiish? I looked through the cabela's catalog and nikon seems to be the only one. but I am thinking matte is probably the way to go. thinking either vx-I 4x12, VX-II 3x9, VX-III in either the 1.75x6 or 2.5x8. Any imput would be nice. JB
nuke the gray whales for jesus!

 


* Advertisement

SimplePortal 2.3.7 © 2008-2025, SimplePortal