collapse

Advertisement


Author Topic: AR-15 charging issue.... help?  (Read 1042 times)

Offline Dan-o

  • Past Sponsor
  • Trade Count: (+12)
  • Explorer
  • *****
  • Join Date: Jul 2010
  • Posts: 11371
Re: AR-15 charging issue.... mystery solved
« Reply #30 on: February 20, 2020, 12:09:49 AM »
So it's a feed issue. Does the BCG go home without a mag inserted.

BCG does go straight home with no mag.
« Last Edit: February 21, 2020, 02:59:05 PM by Dan-o »
Member:   Yakstrakgutp (or whatever we are)
I love the BFRO!!!
I wonder how many people will touch their nose to their screen trying to read this...

Offline Dan-o

  • Past Sponsor
  • Trade Count: (+12)
  • Explorer
  • *****
  • Join Date: Jul 2010
  • Posts: 11371
Re: AR-15 charging issue.... help?
« Reply #31 on: February 20, 2020, 12:13:09 AM »
Worn out mag catch/ release pawl? Or with plastic mags the catch pocket.
Is the mag fully seated up in the chamber?
It would cause the bullet to hit the feed ramp low,
Clean and soak the bcg in lube, ream the chamber, polish the ramp,
try the upper on a different lower and vice versa, change the spring, buy better ammo.
If none of that works, hand it to someone who knows what they’re doing.
Good luck!
\\

Mags fully seat.

Definitely will clean and lube BCG up right.

chamber and ramp are polished.......   and just fed 100 straight before this issue.
Member:   Yakstrakgutp (or whatever we are)
I love the BFRO!!!
I wonder how many people will touch their nose to their screen trying to read this...

Offline hunter399

  • Political Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2014
  • Posts: 2499
  • Location: In your hunting spot
  • Groups: NRA RMEF
Re: AR-15 charging issue.... help?
« Reply #32 on: February 20, 2020, 05:21:20 AM »
That flex hone I posted in a extreme case as yours I would run it at 1min full cartridge length , then pull out to case length 1min .That way you polish the throat of chamber a little.Those brushes are the same thing used on engine clynders and such .Rifle chamber a few thousands here or there =a mile.That's why a brush like that you only use for a min or two and try it.chambering and extraction has cleared up.When I did it after polishing I sprayed wd down the barrel a few times with patches to clean the grit out of there.For just a few minutes of work that chamber was shineing like a brand new penny.
Two birds in the Bush is always better than one in the hand-that way you can always go to the Bush and hunt another day .conservation=Better hunting.
Wrote by hunter399

Offline Jingles

  • Political Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Mar 2011
  • Posts: 2159
  • Location: 98862
  • Life is short so enjoy it to the MAX
Re: AR-15 charging issue.... help?
« Reply #33 on: February 20, 2020, 06:58:20 AM »
Yes I know this statement might seem very elementary and maybe obvious but Go to the basics and make sure the barrel is clear and that a round didn't get pulled out of brass when it was "slammed" into the chamber especially if the following rounds are getting jammed into the succeeding round that won't feed
HMC/USN/RET
1969 -1990

Offline Dan-o

  • Past Sponsor
  • Trade Count: (+12)
  • Explorer
  • *****
  • Join Date: Jul 2010
  • Posts: 11371
Re: AR-15 charging issue.... help?
« Reply #34 on: February 20, 2020, 07:16:50 AM »
Yes I know this statement might seem very elementary and maybe obvious but Go to the basics and make sure the barrel is clear and that a round didn't get pulled out of brass when it was "slammed" into the chamber especially if the following rounds are getting jammed into the succeeding round that won't feed

Done early!!
Yes , elementary, but very important!!
Thanks.
« Last Edit: February 20, 2020, 07:23:33 AM by Dan-o »
Member:   Yakstrakgutp (or whatever we are)
I love the BFRO!!!
I wonder how many people will touch their nose to their screen trying to read this...

Offline Yondering

  • Political Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Sep 2013
  • Posts: 504
  • Location: Sedro Woolley
Re: AR-15 charging issue.... help?
« Reply #35 on: February 21, 2020, 01:39:36 PM »
Yes I know this statement might seem very elementary and maybe obvious but Go to the basics and make sure the barrel is clear and that a round didn't get pulled out of brass when it was "slammed" into the chamber especially if the following rounds are getting jammed into the succeeding round that won't feed

Done early!!
Yes , elementary, but very important!!
Thanks.

Another elementary check - look for a primer or other debris in the barrel extension, between the locking lugs and the chamber. That will stop up an AR like you describe.

If that's not the problem, do these things:

If you lock the bolt back and drop a round into the chamber by hand, does the round go all the way in, or does it stop? (If the round goes all the way in, the case head will be beyond the locking lugs.)

The answer to that will go a long way to figuring out the cause.

If a round won't chamber fully by itself, you have a chamber issue. Bullet stuck in the bore, or remains of a separated case are the likely causes.

If it will chamber by itself, you've most likely got an issue with the BCG and upper. Pull the BCG out of the upper and verify the bolt moves in and out of the carrier (lube the cam pin if you haven't already), and inspect the bolt for any issues like broken lugs, broken/damaged extractor, etc.

Offline Dan-o

  • Past Sponsor
  • Trade Count: (+12)
  • Explorer
  • *****
  • Join Date: Jul 2010
  • Posts: 11371
Re: AR-15 charging issue.... help?
« Reply #36 on: February 21, 2020, 02:56:20 PM »
Mystery solved.

Small piece of shrapnel (piece of a primer?) Jammed in. Lot. 

Feeds like new now.

Thanks!
Member:   Yakstrakgutp (or whatever we are)
I love the BFRO!!!
I wonder how many people will touch their nose to their screen trying to read this...

Offline Yondering

  • Political Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Sep 2013
  • Posts: 504
  • Location: Sedro Woolley
Re: AR-15 charging issue.... help?
« Reply #37 on: February 21, 2020, 02:58:51 PM »
Mystery solved.

Small piece of shrapnel (piece of a primer?) Jammed in. Lot. 

Feeds like new now.

Thanks!

Sweet!
Glad to help.

Offline Dan-o

  • Past Sponsor
  • Trade Count: (+12)
  • Explorer
  • *****
  • Join Date: Jul 2010
  • Posts: 11371
Re: AR-15 charging issue.... help?
« Reply #38 on: February 21, 2020, 03:00:20 PM »
Mystery solved.

Small piece of shrapnel (piece of a primer?) Jammed in. Lot. 

Feeds like new now.

Thanks!

Sweet!
Glad to help.

Not as glad as I am!!!
 :tup:
Member:   Yakstrakgutp (or whatever we are)
I love the BFRO!!!
I wonder how many people will touch their nose to their screen trying to read this...

Offline hunter399

  • Political Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2014
  • Posts: 2499
  • Location: In your hunting spot
  • Groups: NRA RMEF
Re: AR-15 charging issue.... help?
« Reply #39 on: February 21, 2020, 03:02:43 PM »
Glad to hear you got it going
That's sweet :tup:
Where you running reloads or factory .
Two birds in the Bush is always better than one in the hand-that way you can always go to the Bush and hunt another day .conservation=Better hunting.
Wrote by hunter399

Offline Alchase

  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Apr 2007
  • Posts: 14980
  • Location: Tinker AFB, OK
Re: AR-15 charging issue.... help?
« Reply #40 on: February 21, 2020, 07:54:38 PM »
I was thinking bad Mag (like some early Pmags), and or Buffer Spring lube or problem, and to give the Buffer tube and spring a quick squirt of Lithium Grease Spray.

Thanks for posting the cause! What ammo were was he shooting when this happened?
Only 2 defining forces sacrificed themselves for you:
The American Soldier and Jesus Christ. One died for your freedom, the other for your soul.

My rock,
He trains my hands for war and my fingers for battle.
Psalm 144.1

Offline Dan-o

  • Past Sponsor
  • Trade Count: (+12)
  • Explorer
  • *****
  • Join Date: Jul 2010
  • Posts: 11371
Re: AR-15 charging issue.... help?
« Reply #41 on: February 21, 2020, 08:06:53 PM »
Factory ammo.

I dont remember what kind.   

Whatever we had in bulk that is brass.
Member:   Yakstrakgutp (or whatever we are)
I love the BFRO!!!
I wonder how many people will touch their nose to their screen trying to read this...

Offline Blacklab

  • Site Sponsor
  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Mar 2007
  • Posts: 5424
Re: AR-15 charging issue.... help?
« Reply #42 on: February 28, 2020, 06:25:01 AM »
👍😉🥃🇺🇸
Hey! I'm not a complete idiot I have parts missing. Though sometimes I wonder.

If you want to make God laugh tell him your plans.

 


* Advertisement

* Recent Topics

Burnt 3 strands.... New string recommendations. by spin05
[Today at 01:59:52 AM]


Share your 'Post-Ban' fish catches here! by Pete112288
[Today at 01:58:01 AM]


Kelly hill spring bear help??? asking for a friend by 270
[Today at 12:35:03 AM]


InReach or Spot X Messager? Why? by Turdle
[Yesterday at 11:42:39 PM]


Play Free: Hunting-Washington $100 Monthly Lotto! by northwesthunter84
[Yesterday at 11:31:17 PM]


Viewing pictures by huntnnw
[Yesterday at 11:03:38 PM]


FS 1996 f250 xlt by Fl0und3rz
[Yesterday at 10:55:40 PM]


Olympic National Park Goat Hunt Group Anyone? by buglebrush
[Yesterday at 10:52:20 PM]


Oak grove for bears? by Platensek-po
[Yesterday at 10:29:22 PM]


Camo for sale by spoonman
[Yesterday at 10:17:03 PM]


2020 bears by Mr Mykiss
[Yesterday at 10:08:46 PM]


Cabelas Alaknak 12x12 with goodies for sale by ghosthunter
[Yesterday at 10:06:07 PM]


CO Deer by Elkfever
[Yesterday at 09:48:23 PM]


MA 10 Coho by funkster
[Yesterday at 09:39:24 PM]


MT Antelope by sagemd
[Yesterday at 09:08:48 PM]


Bear and Morel Stew!!! It is what's for dinner!! by cougforester
[Yesterday at 09:04:52 PM]


Tag Drawing Results by Ridgerunner
[Yesterday at 09:04:12 PM]


Should Washington Move to a Draw Only Management for Yakima, Colockum, and Blues by Backstraps
[Yesterday at 08:55:27 PM]


Bushmaster .223/5.56 mm Carbon-15 by Damnimissed
[Yesterday at 08:48:27 PM]


Alaknak 12x12 w/ Vestibule and Stove $725 by Buckhunter24
[Yesterday at 08:46:30 PM]