collapse

Advertisement


Author Topic: Blackhorn 209 Cleaning  (Read 2877 times)

Offline Gobble Doc

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Apr 2010
  • Posts: 2680
  • Location: Snohomish, WA
Blackhorn 209 Cleaning
« on: October 08, 2024, 05:39:46 PM »
I’m wondering roughly how many patches you might run through your bore after a few shots with 209. I typically first do a couple dry patches to remove a lot of the initial residue. Then tonight I first used Blackhorn 209
Cleaning solvent for the first time. Then used Hoppe 9
Solvent as usual. Then went to Eezox. After 30+ patches I am still getting a lot of black color. I’m starting to wonder if I’m taking off some kind of barrel coating. I’ve got. Thompson Center bone collector version. Thoughts?  Keep running patches? 


Offline 10thmountainarcher

  • Business Sponsor
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Oct 2010
  • Posts: 962
  • Location: Buckley
Re: Blackhorn 209 Cleaning
« Reply #1 on: October 08, 2024, 05:43:50 PM »
I use windex and run like 3/4 down it. It’s usually pretty clean after that, then I’ll run some dry patches. How many shots did you shoot before cleaning?

Offline Gobble Doc

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Apr 2010
  • Posts: 2680
  • Location: Snohomish, WA
Re: Blackhorn 209 Cleaning
« Reply #2 on: October 08, 2024, 06:42:26 PM »
I use windex and run like 3/4 down it. It’s usually pretty clean after that, then I’ll run some dry patches. How many shots did you shoot before cleaning?

Thanks. I had only taken a couple shots but the guess it is possible that I hadn’t cleaned it sufficiently before.

Offline Remnar

  • Non-Hunting Topics
  • Trade Count: (+6)
  • Longhunter
  • *****
  • Join Date: Nov 2014
  • Posts: 530
  • Location: sw wa
Re: Blackhorn 209 Cleaning
« Reply #3 on: October 08, 2024, 07:07:41 PM »
 Ive been using the montana xtreme blackhorn solvent and bore conditioner since switching to Blackhorn powder when it first came out.

With my gun (CVA Optima) about 5 shots is max then needs cleaned. If im target shooting and want to shoot more just wet patch and a couple dry patches.

If im cleaning to load for hunting after a shooting session . I go wet patch , brush and repeat until clean , usually 2-3 times .Then dry patches 2-3 , then bore conditioner and a couple dry patches after.

Seems to work really well . Although unless something changes with Blackhorn powder and now these cleaning products I will probably find a different avenue ,after I use up what I have . The montana xtreme cleaning products have seemed to double in price just like the powder....But thats neither here nor there ..lol


Offline Gobble Doc

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Apr 2010
  • Posts: 2680
  • Location: Snohomish, WA
Re: Blackhorn 209 Cleaning
« Reply #4 on: October 08, 2024, 08:19:06 PM »
Thank you. After all 4 cleaners, including Windex, I am confident that the barrel is clean. I still get some discoloration on the patches but I don’t think it is from powder residue.

Offline Remnar

  • Non-Hunting Topics
  • Trade Count: (+6)
  • Longhunter
  • *****
  • Join Date: Nov 2014
  • Posts: 530
  • Location: sw wa
Re: Blackhorn 209 Cleaning
« Reply #5 on: October 08, 2024, 09:00:12 PM »
What were you using before?

Offline Gobble Doc

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Apr 2010
  • Posts: 2680
  • Location: Snohomish, WA
Re: Blackhorn 209 Cleaning
« Reply #6 on: October 08, 2024, 11:07:08 PM »
With the blackhorn powder I have used Hoppes up until tonight.

Offline callturner

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Jun 2020
  • Posts: 757
  • Location: nine mile falls Washington
    • n/a
  • Groups: nra
Re: Blackhorn 209 Cleaning
« Reply #7 on: October 09, 2024, 06:58:28 AM »
Learning from the BPCR guys I start with a couple patch's of 10-1 Napa cutting oil and distilled water.  Then I use the Windex on several patch's till clean, Then a couple dry patch's. No big deal in my Accura or Knight Bighorn. Works for Blackhorn or Pyrodex. Fire a couple of caps or primers and there ready to hunt.

Offline Gobble Doc

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Apr 2010
  • Posts: 2680
  • Location: Snohomish, WA
Re: Blackhorn 209 Cleaning
« Reply #8 on: October 09, 2024, 12:00:49 PM »
Thanks everyone. What's strange is that my old Traditions muzzy and Pyrodex was very straightforward. A couple wet patches then a couple dry patches and everything was done and clean. With this Thompson Center with Blackhorn powder it seems like it never gets all the way clean. The barrel inside looks like a mirror but the patches continue to have color. I really do think the solvent is removing some kind of the barrel coating or something.

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Re: Blackhorn 209 Cleaning
« Reply #9 on: October 11, 2024, 12:29:40 AM »
I’m wondering roughly how many patches you might run through your bore after a few shots with 209. I typically first do a couple dry patches to remove a lot of the initial residue. Then tonight I first used Blackhorn 209
Cleaning solvent for the first time. Then used Hoppe 9
Solvent as usual. Then went to Eezox. After 30+ patches I am still getting a lot of black color. I’m starting to wonder if I’m taking off some kind of barrel coating. I’ve got. Thompson Center bone collector version. Thoughts?  Keep running patches?

For myself and over the years I have created my "Easy Bore Cleaning" and best of all it works




Keep shooting muzzleloaders - They are a blast!!

Offline Encore 280

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Oct 2011
  • Posts: 1993
  • Location: Poulsbo
  • Groups: Encore 280
Re: Blackhorn 209 Cleaning
« Reply #10 on: October 11, 2024, 06:06:39 AM »
I get good results with Super Clean in the purple jug. Works great on the breach plug also. :tup:

 


* Advertisement

* Recent Topics

Looking for Solid 22 LR input by Rat44
[Today at 12:26:36 AM]


Lynx kittens confirmed in the Kettle Range by dwils233
[Today at 12:04:14 AM]


Archery elk gear, 2025. by spin05
[Today at 12:03:42 AM]


How To Get Your $0.00 Tax Stamp - Black Hammer Arms by dreadi
[Yesterday at 11:33:25 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by Rainier10
[Yesterday at 10:19:01 PM]


Seeking recommendations on a new scope by Klickitatsteelie
[Yesterday at 09:23:56 PM]


2025 Canning by Twispriver
[Yesterday at 09:15:12 PM]


2025 Montana alternate list by Edminsterquality
[Yesterday at 08:47:06 PM]


WSTA 2025 Summer Rendezvous Agenda by Trapper John
[Yesterday at 08:00:27 PM]


First attempt at polish sausages by Stein
[Yesterday at 07:58:22 PM]


Fullsized Truck Opinion: HiMiNew vs LoMiOlder by MADMAX
[Yesterday at 07:57:22 PM]


Sockeye Numbers by Southpole
[Yesterday at 07:44:30 PM]


Best all around muzzy (updated) by jjhunter
[Yesterday at 07:44:26 PM]


38% increase in fishing and hunting licenses by Sitka_Blacktail
[Yesterday at 07:02:41 PM]


50 inch SXS and Tracks? by 92xj
[Yesterday at 05:34:03 PM]


3 days for Kings by MADMAX
[Yesterday at 05:06:49 PM]


Full moon and last week of September by pd
[Yesterday at 04:51:23 PM]


Hunting bears in the thick stuff by ghosthunter
[Yesterday at 04:33:46 PM]


GMU 247 Entiat bear hunting by Ridgerunner
[Yesterday at 11:56:01 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal