Few more out of the shop

[jaymark6655]

Thanks.  That will look awesome on my rifle.

[calib]

nice looking rifles.

[Jamieb]

Then there is this one.  This is our new wildcat based on a 300WM case that has been blown out, shoulder pushed back and angle changed, longer neck.  The result is a 180 Berger at 3200 in a 27" barrel.  So far, this batch of brass has been fired 9 times and the primer pockets are still tight.  Now that I know it works as I expected, I will get the new rifle put together with our new stock design and Rogue action.  There will be a few guys running them this year, then we will be bringing it out, most likely with correct head stamped brass from Hornady.
Isnt that about a 7mm weatherby, falls right between the 7rem mag and 7mm STW

[rbros]

More capacity than the Weatherby.  A proberly(long) throated 7RM will equal the weatherby without any trouble at all.  The 7 Rogue comes very close to what my 27-28" STW's were running....within 30fps with much less powder.

[Dan-o]

Works of art, each one.

Thanks for sharing.

[huntandjeep]

Nice rifles.

[CastleRocker]

Beautiful.  I've got two Stillers coming, I don't have any particular project lined up for them yet...looks like I'll be getting in touch with you folks. 

PM incoming.

[rbros]

Finally had a chance to get the more "final" version of the 7mm Rogue finished up late last night.  Still waiting on the new stock design, but bear season is approaching so I dropped it in an extra McMillan A-3 I had laying on the shelf.  Broke her in today and am happy with the little tweaks I made to the reamer.  My reduced "forming" charges are clipping along at 3147 with a 180 Berger.  Shot a nice little sub 3" group at 675yds with virgin cases with the forming load.  Will most likely run through these 100 cases and then load them up with the hot load.  The barrel should be stabilized by then.  Hell, the reduced charge is sub 1/2moa accuracy and plenty fast.

Specs:
R Bros Rogue Action w/hunter port
Broughton R Bros spec'd contour, fluted, 1-9 twist, 27" finish
PTG Alum BDL
McMillan A-3
20MOA Alum Rail
Jewell Trigger 1.75lbs
DE Muzzle Brake
DE Cheekpiece
NF 5.5-22x50 w/UL rings

Total weight w/o the bipod is 10.5lbs
The new stock design should get it down to 10lbs or at least the same.

[JPhelps]

  NICE!

Can't wait until mine is ready

[Jim the Plumber]

Thought you guys might enjoy looking at some stuff that going out this week.

308 Win ( NW Multigun donation, shoots 1/4moa with Hornady Match factory ammo!)





 Got to shoot this at the NWMG and it is a shooter for sure! The people I talked to, from the match director on down had a blast shooting this rifle.
 It was kind of funny as a lot of the 160 or so shooters had never fired a rifle to 600 yards before.
RBros rifles (Travis & Jesse) donated this rifle to the prize table and provided the 300 or so rounds of Hornaday match ammo for the shoot as well.