collapse

Advertisement


Author Topic: open or closed reed?  (Read 6470 times)

Offline Krusty

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: May 2007
  • Posts: 238
Re: open or closed reed?
« Reply #15 on: August 20, 2008, 01:15:55 PM »
TLB,

Admittedly I don't know much if anything about tuning JC/Wintress type reeds.
The reeds I installed in most of the calls I've made, have been unaltered, as are ALL reeds coming from a commercial source.

But Bernoulli's principle explains the cause, the venturi created by forcing air at a higher pressure through a tiny slit, then out into the open air at much lower pressure... is a refrigerator pump, in it's crudest form.
Add moisture, and you'll make ice... add more moisture make even  more ice.

As others mentioned, there's freeze up, and there's lock up.

I suffer from both.

Each of us "transpires" moisture out with our breath, at different rates, for this reason you can never blame a brand or even a reed type (brass, steel, mylar).

Though for the most part it only relates to enclosed reed calls.

My own list of calls that will not work, due to lock and/or freeze up, is too long to go into here.
I have to regulate how I use some calls, because, in general, higher pressure "wrings" more moisture from your breath, as does longer notes.
Staccato sounds, short and choppy, mostly driven with a "puff" of the mouth and cheeks, can run for a while.
Whereas a long wailing bleat will lock the best of the best right up, for me.

But, to a large degree, it isn't just the way I use a call, but where the reed is in that call... how far from my mouth... set in wood, metal or plastic... and whether it's a high or low pitched reed... and even how thirsty I am... have a marked effect on how that particular call will "cool" (and heat back up).

In extreme cold, I'll even go to a single reed open reed, because like AWS says freezing when it's not in my mouth  can be a problem (freezing the petals, together or apart).

I will "bite onto" a call between series, to keep it in my mouth and warm, as Rainshadow mentions, but I can't always do that, sometimes I need to catch my breath (or warm up my shooting finger, sticking out of my glove).
When I can, I tuck the call inside my jacket, or in my scarf and under my beard.

The colder it is, the denser the air, and the better that air will carry sound. But in cold times, it's usually very quite outside, with everyone with any sense warm indoors.
I rely much more heavily, on the below handcalling volume of my e-caller, at times like that.

Rainshadow,

It's not just because JC/Wintress reeds are tiny... look at the Dan Thompson Pup Squaller, or a two piece closed reed that can be used in the same "tiny open reed" way the squaller type calls can.

Because it's kept warmer than the refrigerant effect can cool it, it will continue to operate.

I believe the closer a truly enclosed reed is, to one's "warmth" (be it your breath or your body), the less it will suffer from the venturi effect, regardless of size.

*The tiny open reed, actually makes a sixth type of call I regularly use.

Krusty
Sarcasm; just one of the many services I offer.

Offline tlbradford

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 3518
  • Location: Veradale
Re: open or closed reed?
« Reply #16 on: August 20, 2008, 01:23:31 PM »
It has to be really, really cold to freeze the moisture in your call.  I have called in temperatures down to -10 and have yet to have it happen to me with stainless or mylar reeds.  They do get tucked into my coat between sequences, so maybe that is the reason.
Dreams are forever on the mind, realization in the hands.

Offline Bofire

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 5524
  • Location: Yelm
  • Harley YAR YAR YAR!
Re: open or closed reed?
« Reply #17 on: August 22, 2008, 08:23:21 AM »
I have had closed reed calls "freeze up" but not due to cold and freezing. Sometimes the reed just gets stuck from spit or something and it makes no noise. I have had lots of closed reed fall out or blow out of a call. Slydog in idaho tunes his closed reeds and they work slick. I have ruined many a closed reed trying to tune it!!! but then I am a certified idiot. :P I have also had to send calls back to Krusty, open reed, cause I ruined them too.
Carl
When the chips are down..... the buffalo is empty!!

I do not shop at Amazon

Offline tlbradford

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 3518
  • Location: Veradale
Re: open or closed reed?
« Reply #18 on: August 22, 2008, 08:59:51 AM »
+1 Carl on messing up voices trying to make them sound better to my ear. 
Dreams are forever on the mind, realization in the hands.

 


* Advertisement

* Recent Topics

Early Huckleberry Bull Moose tag drawn! by HillHound
[Yesterday at 11:25:17 PM]


THE ULTIMATE QUAD!!!! by Deer slayer
[Yesterday at 10:33:55 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by Tbar
[Yesterday at 10:29:43 PM]


Archery elk gear, 2025. by WapitiTalk1
[Yesterday at 09:41:28 PM]


Unknown Suppressors - Whisper Pickle by pickardjw
[Yesterday at 09:11:06 PM]


Utah cow elk hunt by bearpaw
[Yesterday at 07:18:51 PM]


Oregon spring bear by kodiak06
[Yesterday at 04:40:38 PM]


Tree stand for Western Washingtn by kodiak06
[Yesterday at 04:37:01 PM]


Pocket Carry by BKMFR
[Yesterday at 03:34:12 PM]


A lonely Job... by Loup Loup
[Yesterday at 01:15:11 PM]


Range finders & Angle Compensation by Fidelk
[Yesterday at 11:58:48 AM]


Willapa Hills 1 Bear by hunter399
[Yesterday at 10:55:29 AM]


Bearpaw Outfitters Annual July 4th Hunt Sale by bearpaw
[Yesterday at 08:40:03 AM]


KODIAK06 2025 trail cam and personal pics thread by Boss .300 winmag
[Yesterday at 07:53:52 AM]


Yard bucks by Boss .300 winmag
[July 04, 2025, 11:20:39 PM]


Yard babies by Feathernfurr
[July 04, 2025, 10:04:54 PM]


Seeking recommendations on a new scope by coachg
[July 04, 2025, 08:10:21 PM]


Sauk Unit Youth Elk Tips by high_hunter
[July 04, 2025, 08:06:05 PM]


Jupiter Mountain Rayonier Permit- 621 Bull Tag by HntnFsh
[July 04, 2025, 07:58:22 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal