collapse

Advertisement


Author Topic: Brocks Gunsmithing  (Read 10406 times)

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: Brocks Gunsmithing
« Reply #15 on: November 08, 2012, 03:08:50 PM »
What are you trying to do? I built a full service gunsmith/machine shop and then got slapped in the face with my dream job up here in Alaska....but I am going to be back in town eventually.

Offline 724wd

  • Washington For Wildlife
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Dec 2009
  • Posts: 3884
  • Location: Spokane
Re: Brocks Gunsmithing
« Reply #16 on: November 08, 2012, 03:09:26 PM »
I've NEVER met a "friendly" or courteous gunsmith in my life! All of them acted like I was a scumbag for stopping by.       :chuckle:           I know they are busy, but damn, man!

then you haven't been to the biesen's!  better plan the better part of two hours, cause them boys like to talk! :tup:

Offline C-Money

  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Sep 2008
  • Posts: 10939
  • Location: Grant County
  • Self proclaimed 3pt master
Re: Brocks Gunsmithing
« Reply #17 on: November 08, 2012, 03:27:20 PM »
Brocks glass bedded a few rifles for me, I was satisfied with the work.
I felt like a one legged cat trying to bury a terd on a frozen pond!

Offline FALFire

  • Crazy Old Man with a Gun!
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 1471
  • Location: Planet Earth
Re: Brocks Gunsmithing
« Reply #18 on: November 08, 2012, 04:25:43 PM »
Thanks guys for the report on Brocks.

I am looking at a later date of re-barreling my Remington 700 223 into possibly a 204 Ruger.
Checkin' wind and makin' smoke.
That's how I roll...

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: Brocks Gunsmithing
« Reply #19 on: November 08, 2012, 04:37:14 PM »
some other guys in the area that do good work are waunche, kirby, thome....of course i dont have their contact info with me up here.

the honest truth is if you are just barreleing up an action....its pretty painless to send it to any smith. ask about timing.

Offline WiseOldYote

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Oct 2007
  • Posts: 63
  • Location: E. WA
Re: Brocks Gunsmithing
« Reply #20 on: November 10, 2012, 07:09:03 PM »
They fixed another Spokane Smiths mistake on an Ackley Improved '06 for me, that was 20+ years ago.  I'd  highly recommend them.  Check out Mountain Shadow aswell on Newport hwy just south of Franks Diner.
I personally wouldn't use Mountain Shadow again.  A friend and I have both used him and while he did good work he was very slow.  Took over a week for my buddy to get his gun back and he just needed a hole re tapped for a scope mount.  Told him it would be a couple days.  I had a trigger installed by them and was told it would be a couple days.  Turned into over two weeks.  With that said, I have not used Brocks but have talked to them a couple times about various things.

I find it offensive that there are some on here who feel the need to bitch about any gunsmiths in this area. With all that has happened in the elections and such there are those who still want to bust someones balls over their gun getting fixed by whoever, professional smith or freelance wanna be smith. :bash: We should all get behind them because fact is they are a dying breed, and the crap coming down the legislative pipe isn't going to help their business at all!

I too have been into Mountain Shadow Arms. Many times. Always with results, may not have been what I wanted to hear (needed a new Receiver), but at least I got an honest no BS assessment on my build.  :tup:

In the above quote I am guessing that gentleman wanted his gun fixed right away. He was told a couple days. Great. Maybe instead of busting balls he should look at the dynamics of the business.

 Probably a one man show doing all the gunsmithing? Answering phone calls? Calling customers their gun is done and ready to pick up? Working on guns?  Engaging on endless customer rants and raves of certain discussions that probably went like: "I got this at a gun show and it won't fire" , or, " have you ever worked on a 1911, because I have a stuck case and I have been reloading". :mor:

My point is with all the interuptions I bet the guy has to schedule to take a piss. :pee:

I would venture to say maybe you felt the need to be bumped to the front of the line because your gun was just a simple retaping of a hole! Moreover I am guessing there were probably over 100 guns in front of you when you came into that store.  :yike:

Personally I would have seen all those before me and said " this guy must really know his trade" but hey,  that is just me, and I would feel good that the job would be done right! Regardless of the time of completion.

My advise  is the next time you go into a gunsmith asking for priority keep in mind there are many guys who simply can't fix their guns and rely on these gunsmiths for their expertise. Which is why they continue to own a business and support the local economy and above all they Support our right to keep and bear our arms!

Help them help you get your guns running.  You as competent gun owners, hunters, and enthusiasts appreciate what they do! :brew:



Yotus Wackus Alotus

Offline CAMPMEAT

  • CAMPMEAT
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Sep 2010
  • Posts: 13347
  • Location: ARIZONA, A PLACE WHERE I DON'T WANT YOU LIVING !!
  • I love my gun rights in Arizona..
Re: Brocks Gunsmithing
« Reply #21 on: November 10, 2012, 07:33:24 PM »
Businesses aren't around for a long time if they screw people, right ?
I couldn't care less about what anybody says..............

Offline 724wd

  • Washington For Wildlife
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Dec 2009
  • Posts: 3884
  • Location: Spokane
Re: Brocks Gunsmithing
« Reply #22 on: November 10, 2012, 09:39:41 PM »
everyone's entitled to their opinion and everyone has their own experiences.  my experiences at brocks and mountain shadow have prompted me to recommend anyone that asks that they should never darken the door of either establishment, elections and coming regulations be-damned.

Offline Jburke

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Mar 2008
  • Posts: 1387
  • Location: Spokane
Re: Brocks Gunsmithing
« Reply #23 on: November 11, 2012, 12:11:43 AM »
They fixed another Spokane Smiths mistake on an Ackley Improved '06 for me, that was 20+ years ago.  I'd  highly recommend them.  Check out Mountain Shadow aswell on Newport hwy just south of Franks Diner.
I personally wouldn't use Mountain Shadow again.  A friend and I have both used him and while he did good work he was very slow.  Took over a week for my buddy to get his gun back and he just needed a hole re tapped for a scope mount.  Told him it would be a couple days.  I had a trigger installed by them and was told it would be a couple days.  Turned into over two weeks.  With that said, I have not used Brocks but have talked to them a couple times about various things.

I find it offensive that there are some on here who feel the need to bitch about any gunsmiths in this area. With all that has happened in the elections and such there are those who still want to bust someones balls over their gun getting fixed by whoever, professional smith or freelance wanna be smith. :bash: We should all get behind them because fact is they are a dying breed, and the crap coming down the legislative pipe isn't going to help their business at all!

I too have been into Mountain Shadow Arms. Many times. Always with results, may not have been what I wanted to hear (needed a new Receiver), but at least I got an honest no BS assessment on my build.  :tup:

In the above quote I am guessing that gentleman wanted his gun fixed right away. He was told a couple days. Great. Maybe instead of busting balls he should look at the dynamics of the business.

 Probably a one man show doing all the gunsmithing? Answering phone calls? Calling customers their gun is done and ready to pick up? Working on guns?  Engaging on endless customer rants and raves of certain discussions that probably went like: "I got this at a gun show and it won't fire" , or, " have you ever worked on a 1911, because I have a stuck case and I have been reloading". :mor:

My point is with all the interuptions I bet the guy has to schedule to take a piss. :pee:

I would venture to say maybe you felt the need to be bumped to the front of the line because your gun was just a simple retaping of a hole! Moreover I am guessing there were probably over 100 guns in front of you when you came into that store.  :yike:

Personally I would have seen all those before me and said " this guy must really know his trade" but hey,  that is just me, and I would feel good that the job would be done right! Regardless of the time of completion.

My advise  is the next time you go into a gunsmith asking for priority keep in mind there are many guys who simply can't fix their guns and rely on these gunsmiths for their expertise. Which is why they continue to own a business and support the local economy and above all they Support our right to keep and bear our arms!

Help them help you get your guns running.  You as competent gun owners, hunters, and enthusiasts appreciate what they do! :brew:
Doesn't matter what kind of business you own, if you can't keep promises you won't earn a lot of repeat business from me.  Take your gear where you want and don't think that my experiance is the only way things opperate around his shop.  But customer service is imprtant.   :twocents:

Offline Deep Forks

  • YAR Prospect
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jan 2010
  • Posts: 898
  • Location: central washington
Re: Brocks Gunsmithing
« Reply #24 on: November 11, 2012, 03:38:37 AM »
What are you trying to do? I built a full service gunsmith/machine shop and then got slapped in the face with my dream job up here in Alaska....but I am going to be back in town eventually.
I want you to build me either 280 AI or 7stw. :tup: 

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: Brocks Gunsmithing
« Reply #25 on: November 12, 2012, 12:14:03 AM »
What are you trying to do? I built a full service gunsmith/machine shop and then got slapped in the face with my dream job up here in Alaska....but I am going to be back in town eventually.
I want you to build me either 280 AI or 7stw. :tup: 

I am thinking April I may actually do some work. Between my new jet boat, hunting and a trip around the world with wifey, my next 12 weeks of vacation are pretty planned up. Getting 26 weeks of vacation a year has ruined me.

 


* Advertisement

* Recent Topics

Looking for Solid 22 LR input by Threewolves
[Today at 06:26:42 AM]


Archery elk gear, 2025. by Longfield1
[Today at 05:33:51 AM]


Lynx kittens confirmed in the Kettle Range by dwils233
[Today at 12:04:14 AM]


How To Get Your $0.00 Tax Stamp - Black Hammer Arms by dreadi
[Yesterday at 11:33:25 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by Rainier10
[Yesterday at 10:19:01 PM]


Seeking recommendations on a new scope by Klickitatsteelie
[Yesterday at 09:23:56 PM]


2025 Canning by Twispriver
[Yesterday at 09:15:12 PM]


2025 Montana alternate list by Edminsterquality
[Yesterday at 08:47:06 PM]


WSTA 2025 Summer Rendezvous Agenda by Trapper John
[Yesterday at 08:00:27 PM]


First attempt at polish sausages by Stein
[Yesterday at 07:58:22 PM]


Fullsized Truck Opinion: HiMiNew vs LoMiOlder by MADMAX
[Yesterday at 07:57:22 PM]


Sockeye Numbers by Southpole
[Yesterday at 07:44:30 PM]


Best all around muzzy (updated) by jjhunter
[Yesterday at 07:44:26 PM]


38% increase in fishing and hunting licenses by Sitka_Blacktail
[Yesterday at 07:02:41 PM]


50 inch SXS and Tracks? by 92xj
[Yesterday at 05:34:03 PM]


3 days for Kings by MADMAX
[Yesterday at 05:06:49 PM]


Full moon and last week of September by pd
[Yesterday at 04:51:23 PM]


Hunting bears in the thick stuff by ghosthunter
[Yesterday at 04:33:46 PM]


GMU 247 Entiat bear hunting by Ridgerunner
[Yesterday at 11:56:01 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal