collapse

Advertisement


Author Topic: Mount placement?  (Read 2282 times)

Offline LITTLEBUCK

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Feb 2008
  • Posts: 213
Mount placement?
« on: August 17, 2013, 01:10:55 PM »
To you taxidermist and or knowledgeable mount owners. I have two deer mounts I need to place on my wall. I would like to place them one on each side of my free standing corner wood stove but am questioning myself thinking the extra heat would not be good for the longevity of the mounts. I don't burn all the time but during the winter nothing better then a nice warm fire. Am I correct in my thinking or do you think this would be an ok location. Thanks

Offline FSTaxidermy

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Oct 2010
  • Posts: 935
  • Location: Toledo, Washington
  • Go Seahawks!
    • https://www.facebook.com/pages/fireside-Taxidermy/144574058938866
    • firesidetaxidermy
Re: Mount placement?
« Reply #1 on: August 17, 2013, 02:19:22 PM »
Littlebuck, how far away from the exhaust pipe were you thinking? If positioned to close to direct heat it will shrink hide and epoxy work would possibly crack and lift over time.
FIRESIDE TAXIDERMY
Located in Toledo, WA.  Appox 15 miles south of Chehalis-Centralia
For current photos and general pricing check out our Facebook page: Fireside Taxidermy or give us a call: 360-623-0320
www.firesidetaxidermy.com

Offline Rooster1981

  • R.K.
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Feb 2011
  • Posts: 683
  • Location: Mason County
    • Roosters Kennel
Re: Mount placement?
« Reply #2 on: August 17, 2013, 02:27:45 PM »

This is a good question,  I have a buck mounted over a fire place. The mount was done ten years ago. It is showing heavy signs of deterioration. The shoulder mount has been over the fireplace for five years.  I don't get a lot of heat but I do get excess smoke. Around the mouth and eye's you can see separation. This mount was done by a cheap taxi and not someone i would recamend. So I'm not sure if I just have a poor product or am I getting smoke damage?  I decided to leave it over the mantle because at this point I am going to have to get it remounted anyways.  Can occasional smoke be that damaging?
Hunting hounds since 1993

Offline LITTLEBUCK

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Feb 2008
  • Posts: 213
Re: Mount placement?
« Reply #3 on: August 17, 2013, 03:44:32 PM »
FS, both mounts would sit about 3 feet from the stove pipe. I would have no real smoke problem being it's a free standing stove other than the occasional puff. One mount I'm not to worried about, its from 1983, not done real well but still looks ok, the other is a pretty nice mule deer that Charlie did for me last year, want to keep his art work it top shape. Thanks

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: Mount placement?
« Reply #4 on: September 10, 2013, 02:30:16 AM »
Start a fire and let everything get good and hot.  Then take a temp readibg where you want to hang the heads.  If its much over 80-85 degrees I would look at a different place to hang it.  To much heat over a long period of time ( hanging over a fire place, next to a window allowing direct sunlight, etc) can be damaging to any mount. 

It can cause cracking among other hair problems.

Offline Rooster1981

  • R.K.
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Feb 2011
  • Posts: 683
  • Location: Mason County
    • Roosters Kennel
Re: Mount placement?
« Reply #5 on: September 10, 2013, 06:45:21 AM »
Start a fire and let everything get good and hot.  Then take a temp readibg where you want to hang the heads.  If its much over 80-85 degrees I would look at a different place to hang it.  To much heat over a long period of time ( hanging over a fire place, next to a window allowing direct sunlight, etc) can be damaging to any mount. 

It can cause cracking among other hair problems.

Thanks  :tup:
Hunting hounds since 1993

Offline LITTLEBUCK

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Feb 2008
  • Posts: 213
Re: Mount placement?
« Reply #6 on: September 10, 2013, 10:35:10 AM »
Thanks Michelle. I thought of that but never really knew what the magical numbers would be. I will do just as you suggested.

 


* Advertisement

* Recent Topics

This Jeff Davis guy. by boneaddict
[Today at 10:55:35 AM]


GO 2025 15th Annual Hunting-Washington Christmas Gift Exchange by bearpaw
[Today at 10:36:57 AM]


Winthrop wolves by Pygmy
[Today at 10:13:06 AM]


Report Wolf Sightings Here - Hunting-Washington Wolf Count 158+ by Pygmy
[Today at 10:12:05 AM]


Where can one find hides from hunters? by HighlandLofts
[Today at 09:57:59 AM]


Idaho Trapping Journal 2025/26 by JakeLand
[Today at 09:49:54 AM]


Smith-Reynolds American Legion Post #14 Fall Raffle by pianoman9701
[Today at 08:37:05 AM]


Lion Down - the Savor of Success by Alex4200
[Today at 08:09:18 AM]


In the background by nwwanderer
[Today at 06:44:34 AM]


Swakane by redi
[Yesterday at 11:27:02 PM]


MOA or MRAD, & Why? by Magnum_Willys
[Yesterday at 09:57:59 PM]


Pics from this year 2025 by Kingofthemountain83
[Yesterday at 09:36:06 PM]


2025 elk success thread!! by jstone
[Yesterday at 09:14:54 PM]


2025 blacktail rut thread by Crunchy
[Yesterday at 08:12:33 PM]


Trap Check Time by TeacherMan
[Yesterday at 07:33:16 PM]


Dodge 48re transmission recommendations by 92xj
[Yesterday at 06:19:32 PM]


Crazy looking Deer by NOCK NOCK
[Yesterday at 06:10:52 PM]


"Any Deer" GMU's - Proof of Sex? by Kingofthemountain83
[Yesterday at 05:31:47 PM]


Leopard Cur Pups by teanawayslayer
[Yesterday at 11:05:27 AM]


Smelt ? by Trapper John
[Yesterday at 10:41:03 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal