Both my daughters triggers are froze up they both scored on deer.Now the plungers wont stay back I didn't think they got that wet anything you guys can suggest to get unstuck?
Remove the triggers from the barreled action and you will probably find that the sear is full of fouling from cleaning... Just spray them out very good with carburetor cleaner. Blow them dry and then add lubricant. Everything should be fine after that... Those triggers need to be flushed every once in awhile.
Use the same allen wrench that you use to remove the lug screw to remove the one screw that hold the trigger in place. Also remove the hammer assembly before you remove or install the trigger.
