collapse

Advertisement


Author Topic: Hard work, it all pays off!  (Read 16120 times)

Offline MichaelJ

  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Mar 2007
  • Posts: 3075
  • Location: Washington/Idaho
    • www.facebook.com/hellscanyonarmory
Re: Hard work, it all pays off!
« Reply #45 on: September 23, 2013, 11:04:50 AM »
When I saw this pic on Ian's facebook I was stoked for him for sure... initial impression was mid-high 160's for a gross score.  Then started running the numbers and had him at 178" I think gross.  Either way Ian that's a stud buck and a lot bigger than most of these guys will ever kill with a bow!  Great job and thanks for sharing bud. :)

Here's what I had his numbers at:
G1: 1.5+1.5
G2: 14+14
G3: 10.5+4
G4: 12+12
MB: 25+24
IS: 24.5
Mass: 6+6+5.5+5.5+5.5+5.5
That puts him at 177" gross....

Mike
Hells Canyon Armory Custom Rifles
https://www.facebook.com/HellsCanyonArmory/
HCARifles@gmail.com

Offline Elkrunner

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Nov 2008
  • Posts: 2261
  • Location: Wenatchee
Re: Hard work, it all pays off!
« Reply #46 on: September 23, 2013, 11:08:14 AM »
Good looking deer.  You should get a bonus point for the boots

Offline C-Money

  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Sep 2008
  • Posts: 10939
  • Location: Grant County
  • Self proclaimed 3pt master
Re: Hard work, it all pays off!
« Reply #47 on: September 23, 2013, 11:11:29 AM »
Congrats!! Great deer!!
I felt like a one legged cat trying to bury a terd on a frozen pond!

Offline Roperfive88

  • Non-Hunting Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Nov 2012
  • Posts: 337
  • Location: Eastern Washington
Re: Hard work, it all pays off!
« Reply #48 on: September 23, 2013, 12:27:55 PM »
When I saw this pic on Ian's facebook I was stoked for him for sure... initial impression was mid-high 160's for a gross score.  Then started running the numbers and had him at 178" I think gross.  Either way Ian that's a stud buck and a lot bigger than most of these guys will ever kill with a bow!  Great job and thanks for sharing bud. :)

Here's what I had his numbers at:
G1: 1.5+1.5
G2: 14+14
G3: 10.5+4
G4: 12+12
MB: 25+24
IS: 24.5
Mass: 6+6+5.5+5.5+5.5+5.5
That puts him at 177" gross....

Mike
Your missing two mass measurements. You have 6 measurements for mass and there are always 8, 4 on each side. #1 Between bur and G1, #2 between g1 and g2, #3 between G2 and G4 And #4 is on the back fork between the Main beam and were the G3 forks off. Here is the link To B&C scoring http://www.boone-crockett.org/bgRecords/bc_scoring_typmuledeer.asp?area=bgRecords&type=Typical+Mule+Deer+%26+Blacktail

Big fronts make up for smaller backs. This buck only gets about 50 inches from the back. With these guesses. Nice buck
« Last Edit: September 23, 2013, 12:37:54 PM by Roperfive88 »

Offline pianoman9701

  • Mushroom Man
  • Business Sponsor
  • Trade Count: (+5)
  • Legend
  • *****
  • Join Date: Mar 2011
  • Posts: 44795
  • Location: Vancouver USA
  • WWC, NRA Life, WFW, NAGR, RMEF, WSB, NMLS #2014743
    • www.facebook.com/johnwallacemortgage
    • John Wallace Mortgage
Re: Hard work, it all pays off!
« Reply #49 on: September 23, 2013, 12:30:20 PM »
Great buck. Congratulations.
"Restricting the rights of law-abiding citizens based on the actions of criminals and madmen will have no positive effect on the future acts of criminals and madmen. It will only serve to reduce individual rights and the very security of our republic." - Pianoman https://linktr.ee/johnlwallace https://valoaneducator.tv/johnwallace-2014743

Offline MichaelJ

  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Mar 2007
  • Posts: 3075
  • Location: Washington/Idaho
    • www.facebook.com/hellscanyonarmory
Re: Hard work, it all pays off!
« Reply #50 on: September 23, 2013, 02:38:03 PM »
When I saw this pic on Ian's facebook I was stoked for him for sure... initial impression was mid-high 160's for a gross score.  Then started running the numbers and had him at 178" I think gross.  Either way Ian that's a stud buck and a lot bigger than most of these guys will ever kill with a bow!  Great job and thanks for sharing bud. :)

Here's what I had his numbers at:
G1: 1.5+1.5
G2: 14+14
G3: 10.5+4
G4: 12+12
MB: 25+24
IS: 24.5
Mass: 6+6+5.5+5.5+5.5+5.5
That puts him at 177" gross....

Mike
Your missing two mass measurements. You have 6 measurements for mass and there are always 8, 4 on each side. #1 Between bur and G1, #2 between g1 and g2, #3 between G2 and G4 And #4 is on the back fork between the Main beam and were the G3 forks off. Here is the link To B&C scoring http://www.boone-crockett.org/bgRecords/bc_scoring_typmuledeer.asp?area=bgRecords&type=Typical+Mule+Deer+%26+Blacktail

Big fronts make up for smaller backs. This buck only gets about 50 inches from the back. With these guesses. Nice buck

Indeed i did forget the one above the G1's...  goes to show I was a bit off everywhere else!!

Mike
Sent from my C771 using Tapatalk 2

Hells Canyon Armory Custom Rifles
https://www.facebook.com/HellsCanyonArmory/
HCARifles@gmail.com

Offline Roperfive88

  • Non-Hunting Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Nov 2012
  • Posts: 337
  • Location: Eastern Washington
Re: Hard work, it all pays off!
« Reply #51 on: September 23, 2013, 03:07:35 PM »
When I saw this pic on Ian's facebook I was stoked for him for sure... initial impression was mid-high 160's for a gross score.  Then started running the numbers and had him at 178" I think gross.  Either way Ian that's a stud buck and a lot bigger than most of these guys will ever kill with a bow!  Great job and thanks for sharing bud. :)

Here's what I had his numbers at:
G1: 1.5+1.5
G2: 14+14
G3: 10.5+4
G4: 12+12
MB: 25+24
IS: 24.5
Mass: 6+6+5.5+5.5+5.5+5.5
That puts him at 177" gross....

Mike
Your missing two mass measurements. You have 6 measurements for mass and there are always 8, 4 on each side. #1 Between bur and G1, #2 between g1 and g2, #3 between G2 and G4 And #4 is on the back fork between the Main beam and were the G3 forks off. Here is the link To B&C scoring http://www.boone-crockett.org/bgRecords/bc_scoring_typmuledeer.asp?area=bgRecords&type=Typical+Mule+Deer+%26+Blacktail

Big fronts make up for smaller backs. This buck only gets about 50 inches from the back. With these guesses. Nice buck

Indeed i did forget the one above the G1's...  goes to show I was a bit off everywhere else!!

Mike
Sent from my C771 using Tapatalk 2

Not to far of for looking at a picture. I would say your guesses were pretty close just missed a measurement.

Offline irishevox

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Nov 2012
  • Posts: 1491
  • Location: Whidbey Isalnd
  • Groups: n/a
Re: Hard work, it all pays off!
« Reply #52 on: September 23, 2013, 09:14:59 PM »
Who really cares about measurment... it's an amazing buck and one hell of a rack.... forget about the scoring and let this man enjoy his harvest
Member:  YKWTSASFFRO (The young Buck)

Offline brianmtsinc

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2009
  • Posts: 710
  • Location: Edgewood
Re: Hard work, it all pays off!
« Reply #53 on: September 23, 2013, 09:27:40 PM »
 :yeah:  congrats young man!!   Way to make it happen!! 

Who really cares about measurment... it's an amazing buck and one hell of a rack.... forget about the scoring and let this man enjoy his harvest

Offline Nilehunter

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Sep 2010
  • Posts: 401
  • Location: Federal Way
Re: Hard work, it all pays off!
« Reply #54 on: September 23, 2013, 09:45:45 PM »
Who really cares about measurment... it's an amazing buck and one hell of a rack.... forget about the scoring and let this man enjoy his harvest
:yeah:

Congrats! Great buck.
Work hard-Play hard!

 


* Advertisement

* Recent Topics

Jupiter Mountain Rayonier Permit- 621 Bull Tag by Hunter81
[Today at 07:22:50 PM]


Sauk Unit Youth Elk Tips by Boss .300 winmag
[Today at 07:12:15 PM]


KODIAK06 2025 trail cam and personal pics thread by Boss .300 winmag
[Today at 07:07:33 PM]


MOVED: Seekins Element 7PRC for sale by Bob33
[Today at 06:57:10 PM]


3 pintails by metlhead
[Today at 04:44:03 PM]


1993 Merc issues getting up on plane by Happy Gilmore
[Today at 04:37:55 PM]


A lonely Job... by AL WORRELLS KID
[Today at 03:21:14 PM]


Unit 364 Archery Tag by buglebuster
[Today at 12:16:59 PM]


In the background by zwickeyman
[Today at 12:10:13 PM]


A. Cole Lockback in AEB-L and Micarta by A. Cole
[Today at 09:15:34 AM]


Willapa Hills 1 Bear by hunter399
[Today at 08:24:48 AM]


Bearpaw Outfitters Annual July 4th Hunt Sale by Threewolves
[Today at 06:35:57 AM]


Sockeye Numbers by Southpole
[Yesterday at 09:02:04 PM]


Selkirk bull moose. by moose40
[Yesterday at 05:42:19 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal