truck window advise needed.

[sled]

  This Morning Going To Work I Rolled Down My Window.  It Was Frozen And The Track Pulled Loose From The Glass.  What Do Dealers Or Auto Shops Use For Adhesive To Glue Glass To Steel?  I Went To Auto Parts Store But They Were To Wishy Washy On What To Recommend.

[CAMPMEAT]

I bet if you took off your door panel, you could put it back on track yourself.

[coachcw]

not sure what year you have but if its just pulled out of the channel you can clean it good with brake clean ( panel off ) then wipe with glass cleaner and use either window urethane or I use the permatex ultra silicone its the heavy gray that sticks like mad . fill the run channel and push the glass into it and run the window up and leave it for a couple of days you will be good to go .

[sled]

I bet if you took off your door panel, you could put it back on track yourself.

  I Already Put It Back In The Track.  IM Just Trying To Figure Out What To Use To Glue It Back.

[sled]

not sure what year you have but if its just pulled out of the channel you can clean it good with brake clean ( panel off ) then wipe with glass cleaner and use either window urethane or I use the permatex ultra silicone its the heavy gray that sticks like mad . fill the run channel and push the glass into it and run the window up and leave it for a couple of days you will be good to go .

  In Your Experience, Will This Work In This Cold Weather Or Should I Wait Until It Warms Up A Bit?

[coachcw]

it will set but i'd leave the window up for a few days . if you run by a glass shop the may just give you a partial tube of urethane once it's opened it goe's bad fairly soon . urethane is a total bitch to redo if you have a issue that's why I lean towards the good gray silicone ( it should work fine ) just make sure it's cured this time of year it can take a few days to totally set .

[loggerjim]

I did the same thing last year on my '01 f-150. I used freesole and has worked great ever since. Good luck.

[jackelope]

Glass shops use urethane adhesive. Same stuff they use on windshields.

[Kittman]

3M Automix Channel Bonding and Sidelite Adhesive - 08641

http://3mcollision.com/3m-channel-bonding-and-sidelite-adhesive-50ml-08641.html

There may be a few others.

Good luck.

[sled]

  Thanks For The Help Guys.