Cam Frozen

[stromdiddily]

Hunting in the upper peninsula michigan...drew my bow, arrow froze to the arrow rest and unnocked itself, went to let down and the cam froze in place...string proceeded to blow off the cam and the idling wheel...all on the first day of hunting.
Any one have experience in keeping stuff from not freezing? As it is I'm hoping to find a bow shop to replace my strings and cable

Tapatalk

[Eli346]

Wow! Be careful when you take a leak.

[Bmcox86]

 

Hope you get it fixed, did you spook the deer?

[BOWHUNTER45]

1st time I ever heard that one  I know it gets really cold in Michigan but not that cold 

[huntnnw]

never heard of that... Ive bowhunted in below 0 temps quite abit and never had an issue

[sakoshooter]

Obviously there was some moisture involved. I'm an oil nut. If it's metal and moves it gets lubed. Very thin oil goes a long way.

[stromdiddily]

Deer spooked on the let down...wasn't very graceful obviously haha.

Was sitting in the stand getting snowed on pretty steady. Thinking some of it melted on the cam then refroze some how Taking it in today to see if I can get it fixed.

Tapatalk

[stromdiddily]

Sako what oil do you use? Is it something I could put directly on the cam?

Tapatalk

[Elkrunner]

Damn, how cold was it there?

[pianoman9701]

Sako what oil do you use? Is it something I could put directly on the cam?

Tapatalk

Be careful using oil. Some bows are manufactured to not use any and using oil will void the warrantee. My Hoyt uses no oil. What kind of bow is this?

[Jellymon]

How do you know the cam froze in place? What bow is it?  This sounds like a derail to me.

I've heard lots of reasons for strings coming off. Cam froze, string track too shallow, debris in cam, strings breaking. 95% of the time you hear these stories it happens on let down, and it's because of a user induced derail. The main cause of this is torquing the bow while letting the bow down too quickly, causing the string to slide out of its track, derailing the bow. Now while it is possible for the cam to freeze, I don't think it happened, because drawing back would free any ice buildup and free the cam for release. Plus, I'm pretty sure that a single cam that freezes at full draw will keep the limbs compressed. The cable would hold the bow together and you would be able to take the string off by hand.

[BULLBLASTER]

When its very cold like that I will leave my bow in a cold place to acclimate to the temps. Outside. With a cold bow the snow won't freeze on it.
Something doesn't seem right with the story... the cam rolled fine to draw back but then quickly froze while at full draw? Seems like a torque induced derail.

[_TONY_]

How do you know the cam froze in place? What bow is it?  This sounds like a derail to me.

I've heard lots of reasons for strings coming off. Cam froze, string track too shallow, debris in cam, strings breaking. 95% of the time you hear these stories it happens on let down, and it's because of a user induced derail. The main cause of this is torquing the bow while letting the bow down too quickly, causing the string to slide out of its track, derailing the bow. Now while it is possible for the cam to freeze, I don't think it happened, because drawing back would free any ice buildup and free the cam for release. Plus, I'm pretty sure that a single cam that freezes at full draw will keep the limbs compressed. The cable would hold the bow together and you would be able to take the string off by hand.

^ This

[stromdiddily]

Could have been a torque issue. All I know is my arrow unnocked itself and my hand froze to the bow so stuff was definitely sticking. Have let down my bow 100 times but who knows.

Regardless the string and all cables blew off the cam. Found a guy with a bow press and figured out how to put it back together. Got it sighted back in...more or less...and have four more days to find a buck.

Tapatalk

[pianoman9701]

We still don't know what kind of bow this was, do we?