Powder Question

[d_wilson]

Looking to start reloading for my .300 Weatherby but I'm not sure which powder to use.  I was told to buy Imr 7828 but all I have found so far is Imr 7828 SSC.  Will the SSC work?  Going to use 210 gr Bergers if that helps.  Thanks.

[Biggerhammer]

H1000 is a exellent/accurate powder option for the 210's,  it will keep you in the same velocity range as IMR 7828 with about 2-3 grains more powder. IMR 7828 is a good powder I'm just mentioning H1000 as a alternate if you can't find 7828. Hooked On Toys had H1000 on the shelf the other day when I was in there.

[Heredoggydoggy]

It's the same stuff.  SSC stands for Super Short Cut... It means the long extruded grains of powder are cut shorter so it meters better out of a powder measure.  Grain weight for grain weight will be the same. 

[d_wilson]

Thanks for the help guys

[yorketransport]

The SSC is a huge improvement over the standard 7828. The shorter granules fill the case much better and meter better from a powder measure.

Andrew

[mountainman]

The SSC is a huge improvement over the standard 7828. The shorter granules fill the case much better and meter better from a powder measure.

Andrew

[BULLBLASTER]

Looking to start reloading for my .300 Weatherby but I'm not sure which powder to use.  I was told to buy Imr 7828 but all I have found so far is Imr 7828 SSC.  Will the SSC work?  Going to use 210 gr Bergers if that helps.  Thanks.

if you don't have any 210 grain bergers yet, I have a box of 100 for sale. pm me if you are interested.