collapse

Advertisement


Author Topic: Green Mountain barrels 6.5 WSM.  (Read 2879 times)

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Green Mountain barrels 6.5 WSM.
« on: January 28, 2014, 08:54:41 PM »
I've been helping a new member here "Hot Rod Willy" with a wildcat build, his first wildcat. He first was entertaining the thought of a 6.5 SAUM. After a little more discussion he decided on a 6.5 WSM also known as the 6.5-270 WSM or the 6.5-300 WSM. The rifle was built on a Rem700 action with a Green Mountain F34 contour, 9 twist. Basically a 26" sporter weight. The thing to keep in mind here is this is a 92.00 barrel blank through Midway. He sent it of to a guy I suggested in Idaho. That chambered, threaded, crowned and fit the barrel. Along with lapping the lugs for a 175.00. He had the barreled action back in about two weeks.

Brass was necked down once fired stuff I gave him, loaded up some for the barrel brake in. He mounted a 3x9 scope just to get him by until his Leupold 8.5-25 arrived, which it did today. Off to the range, I was more than IMPRESSED! with the rifle, I already know the kid can shoot!

92.00 barrel
175.00 chamber and fit

I personally witnessed that rifle shoot group after group under half inch, his largest group going .514 @ 100 yards. I don't know about the rest of you but I have spent a bunch more for rifles to shooting like that consistanly  with everything from 100gr Partitions to 140gr Accubonds like I watched his rifle do and not too shabby trigger work I might add(Factory Remington trigger/stock) Here's his best group of the day in the mid .3's ( Pic bellow) He was pleased and I just sat and smiled because I knew when I got home I was ordering the same barrel in a varmint contour for a future project and the fact that sometimes things just come together without the average Rem700 custom barrel job and action work for 1000.00 plus. It should make a great Mulie/Elk rifle.


Off course he had some extras done. A muzzle brake and the barreled action bead blasted and matte blued. Fitted it to a Rem700 BDL stock along with Wyatt's bottom metal and detachable mags. I'll get pics when the scope is mounted and it's all back together. He's definitely been bitten, he's already looking towards his next build. :tup:

100 yards off a Harris bipod and rear bag.





 
« Last Edit: January 28, 2014, 09:13:43 PM by Biggerhammer »

Offline mossback91

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Dec 2007
  • Posts: 3196
Re: Green Mountain barrels 6.5 WSM.
« Reply #1 on: January 28, 2014, 11:10:01 PM »
 :tup:

Offline Eli346

  • Eli
  • Past Sponsor
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Mar 2009
  • Posts: 2293
  • Location: Shelton
Re: Green Mountain barrels 6.5 WSM.
« Reply #2 on: January 29, 2014, 08:11:44 AM »
I'm envious!

Offline Taco280AI

  • Past Sponsor
  • Trade Count: (+6)
  • Frontiersman
  • *****
  • Join Date: Jan 2013
  • Posts: 2961
  • Location: FL350
Re: Green Mountain barrels 6.5 WSM.
« Reply #3 on: January 29, 2014, 07:56:48 PM »
Great low cost project  :tup:

Offline Hot Rod Willy

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Jan 2014
  • Posts: 14
  • Location: Wenatchee Area
Re: Green Mountain barrels 6.5 WSM.
« Reply #4 on: January 30, 2014, 11:46:46 PM »
That was number 7-8-9 out of that barrel on a clean bore. Yehaw

Thanks again BiggerHammer for giving me a taste its only gonna cost me more than anything now.
 :tup:
"America is all about speed, Hot, Nasty, Bad-Ass speed. " Eleanor Roosevelt.

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: Green Mountain barrels 6.5 WSM.
« Reply #5 on: January 31, 2014, 12:50:17 AM »
Did you have Mel or Sam spin it on for you?

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: Green Mountain barrels 6.5 WSM.
« Reply #6 on: January 31, 2014, 03:53:42 PM »
Did you have Mel or Sam spin it on for you?

Mel....👍

 


* Advertisement

* Recent Topics

Got a great deal on a jet sled by huntnphool
[Today at 12:42:36 AM]


Montana Cutting Deer Licenses by huntnphool
[Yesterday at 11:49:14 PM]


Idaho Non-res hunt draw by Broomd
[Yesterday at 11:37:10 PM]


Eastern Elk Management by buglebuster
[Yesterday at 10:37:48 PM]


The first Moose tags. by tracksoup
[Yesterday at 10:14:29 PM]


Late Alta Muzzy by Gentrys
[Yesterday at 09:43:00 PM]


Coyote hunting with dogs by Barehunter
[Yesterday at 08:12:09 PM]


3 pintails by YoungFowler
[Yesterday at 07:17:53 PM]


One of my favorites this fall by Caseknife
[Yesterday at 06:29:49 PM]


FS Surbu BFG 50 by Tacticalhammer
[Yesterday at 06:24:02 PM]


From Behind by Kingofthemountain83
[Yesterday at 05:28:41 PM]


Who knows electric bikes? looking at Quietkat options by CP
[Yesterday at 04:32:25 PM]


My Wenaha bull by Whitenuckles
[Yesterday at 03:29:46 PM]


My Entiat Late tag thread by Whitenuckles
[Yesterday at 03:24:18 PM]


My daughters first deer. by Whitenuckles
[Yesterday at 03:22:51 PM]


Looking for Red Hot Replacement Muzzleloader Nipple 2 SKU: M900013 by Westside88
[Yesterday at 03:10:28 PM]


Selkirk bull moose. by 7mmfan
[Yesterday at 02:23:56 PM]


2025 15th Annual Hunting-Washington Christmas Gift Exchange by wadu1
[Yesterday at 01:42:33 PM]


Moose in western washington? by Okanagan
[Yesterday at 01:06:31 PM]


Last day! Don’t leave us hanging by Kingofthemountain83
[Yesterday at 01:03:26 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal