collapse

Advertisement


Author Topic: Stuck Axel Nut: Need a heavy duty breaker bar  (Read 3734 times)

Offline snocohunter

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Nov 2008
  • Posts: 640
  • Location: Lake Stevens, WA
Stuck Axel Nut: Need a heavy duty breaker bar
« on: July 06, 2014, 10:41:59 PM »
It appears some numb nuts rattled the axle nut on my dodge ram 2500 and I've already broken two cheaper 1/2" breaker bars. I think the biggest issue is because I've had to step it up to a 3/4" adapter because the socket is 3/4 drive. Saltwaterhillbilly was over trying to help and his bad boy impact needs more air than my little compressor can give it. Tried heat and didn't budge.

I'm in Marysville,if anyone can help it would be much appreciated.

Offline SnakeEyes

  • Real Estate Broker
  • Business Sponsor
  • Trade Count: (+1)
  • Scout
  • *****
  • Join Date: Jun 2009
  • Posts: 421
  • Location: La Center, WA
    • John L Scott Real Estate
  • Groups: Washington for Wildlife
Re: Stuck Axel Nut: Need a heavy duty breaker bar
« Reply #1 on: July 06, 2014, 11:57:40 PM »
I rented a 3/4'' drive torque wrench. Maybe that could be an option in your area. I borrowed a breaker bar and would help if you were closer.
Steve Marshall - John L Scott Real Estate

Selling Homes and Acreage in SW Washington

Offline 4fletch

  • Older than old
  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Jan 2014
  • Posts: 1421
  • Location: North bend wa
Re: Stuck Axel Nut: Need a heavy duty breaker bar
« Reply #2 on: July 07, 2014, 05:42:23 AM »
If you have room to use a 3 " cut off wheel harbor freight electric cut off tool slice , grind the nut almost to the threads. Using a cold chisel and hammer some heat , then strike the nut in the counter clock position. One of the best penetrant  oils is 1/2 acetone and 1/2 ATF

Offline 4fletch

  • Older than old
  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Jan 2014
  • Posts: 1421
  • Location: North bend wa
Re: Stuck Axel Nut: Need a heavy duty breaker bar
« Reply #3 on: July 07, 2014, 05:43:44 AM »
You might have to slice it twice

Offline DRobnsn

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2009
  • Posts: 1036
  • Location: wetside
Re: Stuck Axel Nut: Need a heavy duty breaker bar
« Reply #4 on: July 07, 2014, 07:11:50 AM »
How much heat did you give it?  I had to heat mine cherry red hot, use a 1/2 breaker bar with a 4 foot piece of pipe and my 270lb ars standing on it to get mine broke free. I ended up bending the head on my 1/2 breaker bar doing this btw. I would try to borrow a good 3/4 inch impact gun and try to run at least 120psi with 1/2 hose, it if you can.   

Offline Encore 280

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Oct 2011
  • Posts: 1993
  • Location: Poulsbo
  • Groups: Encore 280
Re: Stuck Axel Nut: Need a heavy duty breaker bar
« Reply #5 on: July 07, 2014, 07:43:18 AM »
Who ever put it on may have cross threaded it all the way on, gonna be tough getting it back out. Take back to who ever did it and let them deal with it if it was a tire store. :twocents:

Offline smittyJ

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jan 2012
  • Posts: 532
  • Location: Allyn
Re: Stuck Axel Nut: Need a heavy duty breaker bar
« Reply #6 on: July 07, 2014, 07:56:46 AM »
Who ever put it on may have cross threaded it all the way on, gonna be tough getting it back out. Take back to who ever did it and let them deal with it if it was a tire store. :twocents:
Then they can repair it, otherwise rent a quality breaker bar and slide a peice of pipe over it (4' to 5')

Offline usmc74

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Mar 2009
  • Posts: 1378
  • Location: North Bend
  • Groups: NRA (Life), RMEF, SAF (Life), American Legion (Life), Master Hunter
Re: Stuck Axel Nut: Need a heavy duty breaker bar
« Reply #7 on: July 07, 2014, 12:16:04 PM »
Must have been to the "S" store.

I stopped going there years ago because of this

Offline cooltimber

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Sep 2011
  • Posts: 593
  • Location: Idaho
Re: Stuck Axel Nut: Need a heavy duty breaker bar
« Reply #8 on: July 07, 2014, 08:48:38 PM »
simple get a torch rig ,,get it red hot and off it will come ..make sure you re grease every thing when reassembling! 
rvn 69-70 11 b 2p 173rd
rmef
  2 ways to conquer and enslave a nation
      one's by sword,the other is by debt.
               John Adams

Offline Kittman

  • Past Sponsor
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2013
  • Posts: 527
  • Location: Oak Harbor
  • Groups: NRA, US Navy
Re: Stuck Axel Nut: Need a heavy duty breaker bar
« Reply #9 on: July 08, 2014, 01:32:40 PM »
1994-2002 Replacement nut = Spicer 46085, Thread Size 1.125-18 in case you've reached this point...

  http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=Spicer%2046085
 
« Last Edit: July 09, 2014, 11:09:45 AM by Kittman »

Offline snocohunter

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Nov 2008
  • Posts: 640
  • Location: Lake Stevens, WA
Re: Stuck Axel Nut: Need a heavy duty breaker bar
« Reply #10 on: July 09, 2014, 11:01:19 PM »
Sorry been busy. Had a friend come over with a 1" drive 3ft long ratchet and she spun right off. Didn't get it cherry red but damn hot.

Saltwaterhilbilly Kyle is the man, he changed the hub out for me while i was at work.

Offline netcoyote

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2010
  • Posts: 1770
  • Location: Olympia, WA
Re: Stuck Axel Nut: Need a heavy duty breaker bar
« Reply #11 on: July 10, 2014, 11:00:46 PM »
There is a lot of metallurgical engineering involved in making axle components and I would think that heating any axle component "cherry red" is asking for trouble. If you can't get it off from heating it with a small propane torch, you better have a Plan B. Best plan is no heat at all. I've used the acetone/transmission fluid many times and found it to be a miracle cure for stuff like this.
"...t'aint never a thing wrong with a man such that the mountains can't cure."

 


* Advertisement

* Recent Topics

MA-10 Coho by WAcoueshunter
[Today at 02:08:31 PM]


KODIAK06 2025 trail cam and personal pics thread by kodiak06
[Today at 01:52:01 PM]


2025 Montana alternate list by Sakko300wsm
[Today at 01:27:16 PM]


Blue Mtn Foothills West Rifle Tag by Trooper
[Today at 01:18:40 PM]


GROUSE 2025...the Season is looming! by Dave Workman
[Today at 01:01:22 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by bearpaw
[Today at 12:02:58 PM]


50 inch SXS and Tracks? by jrebel
[Today at 11:20:33 AM]


Sockeye Numbers by Southpole
[Today at 11:12:46 AM]


3 pintails by metlhead
[Today at 11:07:43 AM]


Modified game cart... 🛒 by Dan-o
[Today at 08:44:37 AM]


Velvet by Brute
[Today at 08:37:08 AM]


Calling Bears by hunter399
[Today at 06:12:44 AM]


HUNTNNW 2025 trail cam thread and photos by kodiak06
[Today at 05:43:11 AM]


Lizard Cam by NOCK NOCK
[Today at 04:48:54 AM]


Pocket Carry by Westside88
[Yesterday at 09:33:35 PM]


2025 Coyotes by JakeLand
[Yesterday at 07:15:03 PM]


Toutle Quality Bull - Rifle by Yeti419
[Yesterday at 06:11:55 PM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by scottfrick
[Yesterday at 02:14:23 PM]


2025 Crab! by Stein
[Yesterday at 01:48:55 PM]


Sauk Unit Youth Elk Tips by Kales15
[Yesterday at 01:04:52 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal