collapse

Advertisement


Author Topic: Need some help...  (Read 1329 times)

Offline Wild Bill

  • Trade Count: (+6)
  • Longhunter
  • *****
  • Join Date: Apr 2009
  • Posts: 500
Need some help...
« on: September 17, 2018, 11:13:39 AM »
So, I’m stuck in KY for a while... learning a lot about humidity... the hard way.
My 7mag loves 3100fps... if I’m off that mark more than 50fps, she goes from a 1/4 in gun to .75. Good enough to hunt with.

I brought my powder down from wa. Like a dummy left it in the garage in a pelican case.
First shooting  session after reloading I immediately realized how bad that idea was. My rifle dropped A LOT of FPS. I associate it with the humidity possibly soaking into the powder.
 I had the fortunate experience of Shooting with Jerry Barnhart and spoke with him about my troubles. He recommended moving my set up into the basement. He said the powder will begin to dry up a little. I did so, and it brought the FPS back to 2965 average. Not perfect, but good enough for barely under a moa at 1200 yds.

So now, I’m toying with pulling the powder out of the 80-150 rnds I had loaded from the powder in the garage. At 69.5 grains per, that’s a lot of powder. And that means a lot of money. Lol

Would It be a bad idea to pull them, then pour them back into the keg in hopes it drys back out to the same level? I won’t be reloading until after Sept 28, as I’m out of town on an Archery hunt. So it has about two weeks.

The 80 good rounds I have loaded won’t be enough for my range time, and 3 rifle hunts I have this yr, so I’m for sure going to end up reloading, but can’t stand the thought of tossing that powder if it may dry out a little in that time.

Thoughts?
WB

Offline h20hunter

  • Trade Count: (+16)
  • Legend
  • ******
  • Join Date: Jan 2010
  • Posts: 20872
  • Location: Lake Stevens
Re: Need some help...
« Reply #1 on: September 17, 2018, 11:24:35 AM »
My first thought is thats a lotta rounds to break down depending on your method with no guarantee your powder is salvageable. Sp break down 20, keep the powder seperate, let it dry, load, fire. If you are good to go break em all down.

Offline Oh Mah

  • Non-Hunting Topics
  • Trade Count: (+12)
  • Old Salt
  • ******
  • Join Date: Oct 2015
  • Posts: 6614
  • Location: region 3 Montana
Re: Need some help...
« Reply #2 on: September 17, 2018, 01:26:03 PM »
if you end up pulling them all,buy yourself a cake size tupper ware pan pour the powder in it level it out so it is even put 3 sandwich bags open with a couple crackers in each (to keep cracker contaminates out of powder) and let set with lid on a few days and the powder will be, well powder dry again.  :tup: during the few days turn powder around a little to get bottom to top and vise versa.
"Boss of the woods"
(this is in reference to the biggie not me).

Offline Bofire

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 5524
  • Location: Yelm
  • Harley YAR YAR YAR!
Re: Need some help...
« Reply #3 on: September 17, 2018, 08:39:44 PM »
might as well shoot em up.
Carl
When the chips are down..... the buffalo is empty!!

I do not shop at Amazon

 


* Advertisement

* Recent Topics

CB Radio Hints and Tips, Installing guidance. by ghosthunter
[Today at 09:25:11 AM]


2025 blacktail rut thread by jamesfromseattle
[Today at 09:22:45 AM]


Cerakote by reloadxl650
[Today at 08:36:25 AM]


Hunting with a suppressor - dumb idea? by pickardjw
[Today at 08:27:14 AM]


New hunter looking for some help by GWP
[Today at 08:06:31 AM]


328/329 reports by Gentrys
[Today at 07:34:05 AM]


Restraining Order to Prevent Sherman Wolf Removal by hunter399
[Today at 07:20:48 AM]


Buck to Doe Ratio by hunter399
[Today at 05:03:34 AM]


GL Late Tag holders by JakeLand
[Today at 04:20:16 AM]


2025 elk success thread!! by Broomd
[Yesterday at 10:27:45 PM]


2025 deer, let's see em! by fowl smacker
[Yesterday at 09:42:13 PM]


2024 Ford Edge Opinion by mountainman
[Yesterday at 09:28:11 PM]


Pheasant Release Program by McCRIZZLEY
[Yesterday at 08:59:10 PM]


Kettle Range Moose by MADMAX
[Yesterday at 07:15:18 PM]


2025 Montana alternate list by CJ1962
[Yesterday at 07:12:50 PM]


Youth Idaho Brownlee Cow Tag by CJ1962
[Yesterday at 07:08:52 PM]


AMMO 6.5 PRC 143 Gr ELD-X Hornady by scottfrick
[Yesterday at 03:57:18 PM]


North Idaho 2025 Rifle Bull by ganghis
[Yesterday at 03:18:11 PM]


I bought this beater Win 06 as a scrapper outer, it turned into a fixer upper by bearhunter99
[Yesterday at 02:14:34 PM]


Any Luck With Used Dies ? by HereDuckyDucky
[Yesterday at 01:49:07 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal