collapse

Advertisement


Author Topic: Flat bottom or no?  (Read 1371 times)

Offline Crowsridge

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Apr 2020
  • Posts: 2
  • Location: Rockford
Flat bottom or no?
« on: April 01, 2020, 04:33:42 PM »
Looking for input.  I am hunting for a mid size boat. I have a 23’ pilot house and the kids have a pontoon. We want a small boat to “grab and go” with maybe just me and a grandchild or two, or there’s a couple lakes we like that don’t have ramps.

I found a completely redone 18’ Alumaweld sled in very nice condition. The 85 MERC pump motor has carb issues and the dealer removed it. He says I can have it if I want it. He assumed I was calling about a different Alumaweld and seemed surprised I was asking about the flat. My son argues against flat bottoms too. I had two different sleds way back and loved them. Nice boat for not much money. There’s another one I found, 18’ Smokercraft old school sled. I’m okay with a good boat and replacing motors if required. Good motor is better.

I know everyone has moved on to more “vee” style but????

Thanks for consideration.

Offline full choke

  • Non-Hunting Topics
  • Trade Count: (+14)
  • Frontiersman
  • *****
  • Join Date: Jan 2009
  • Posts: 2771
  • Location: Maple Valley
Re: Flat bottom or no?
« Reply #1 on: April 01, 2020, 04:37:29 PM »
Looking for input.  I am hunting for a mid size boat. I have a 23’ pilot house and the kids have a pontoon. We want a small boat to “grab and go” with maybe just me and a grandchild or two, or there’s a couple lakes we like that don’t have ramps.

I found a completely redone 18’ Alumaweld sled in very nice condition. The 85 MERC pump motor has carb issues and the dealer removed it. He says I can have it if I want it. He assumed I was calling about a different Alumaweld and seemed surprised I was asking about the flat. My son argues against flat bottoms too. I had two different sleds way back and loved them. Nice boat for not much money. There’s another one I found, 18’ Smokercraft old school sled. I’m okay with a good boat and replacing motors if required. Good motor is better.

I know everyone has moved on to more “vee” style but????

Thanks for consideration.

Flat bottoms are fine- if you use them for their intended purpose. No fun at all in choppy water.

I am confused though- you say a "grab and go" boat for you and a grandkid to hit a lake with no ramp, but you are looking at a 18' sled with a 85 pump? That is a pretty big boat and motor for no ramp access...
"If you think our wars for oil are bad, wait until we are fighting for water..."

Offline Crowsridge

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Apr 2020
  • Posts: 2
  • Location: Rockford
Re: Flat bottom or no?
« Reply #2 on: April 01, 2020, 07:03:55 PM »
They launch bigger boats, but it’s not fun. You have to back way in to get deep enough, but there is a sheer wall back there that drops straight down 30 feet. Pretty shallow, but I think the flat will float enough plus beach easier than the toon or a vee hull.

I test drove a 16 foot version this week down in Lewiston. It felt tiny and pretty tippy with two guys in it.

Offline dilleytech

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jul 2014
  • Posts: 1715
  • Location: Columbia gorge washington
Re: Flat bottom or no?
« Reply #3 on: April 05, 2020, 09:34:05 AM »
If you need to run fast on skinny water then certainly get the sled. If you want to not beat the crap out of yourself and family when running in wind waves get the v bottom.

Offline buckfvr

  • Washington For Wildlife
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jun 2010
  • Posts: 4515
  • Location: UNGULATE FREE ZONE UNIT 121
Re: Flat bottom or no?
« Reply #4 on: April 05, 2020, 09:42:31 AM »
6* v with a 6' floor like the old alumaweld 20' vee lite is a very good compromise.  Stable and runs skinny water and can handle some chop.

 


* Advertisement

* Recent Topics

WA Bucket List….Mule Deer Permit by Bearhunter
[Today at 10:36:37 AM]


Question about Hancock Timber Co Eastside by MMCCAULEY
[Today at 10:31:50 AM]


GO 2025 15th Annual Hunting-Washington Christmas Gift Exchange by TheYoungSelfStarter
[Today at 10:29:47 AM]


Cell Cams for Westside Elk by kodiak06
[Today at 10:12:19 AM]


The Rack by Pathfinder101
[Today at 09:21:09 AM]


Smith-Reynolds American Legion Post #14 Fall Raffle by HntnFsh
[Today at 08:46:23 AM]


Idaho on the verge of outlawing by Machias
[Today at 07:51:44 AM]


HUNTNNW 2025 trail cam thread and photos by Machias
[Today at 07:50:38 AM]


Weatherby Long Range Steel Choke by Henrydog
[Today at 06:33:46 AM]


My Entiat Late tag thread by Lapua338
[Today at 06:24:08 AM]


Colockum WMA chukar hunting by Kingofthemountain83
[Yesterday at 11:44:55 PM]


Early Huckleberry Bull Moose tag drawn! by Turner89
[Yesterday at 09:15:28 PM]


Selkirk bull moose. by Turner89
[Yesterday at 08:38:02 PM]


Cleaning glass by MADMAX
[Yesterday at 07:26:32 PM]


Lion Down - the Savor of Success by DonJuan
[Yesterday at 02:22:27 PM]


Darwin Outfitters by Kingofthemountain83
[Yesterday at 12:22:38 PM]


Degreasing A Deer Skull by eyesinfront
[Yesterday at 09:47:06 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal