collapse

Advertisement


Author Topic: Barrel length  (Read 2788 times)

catwithboost

  • Guest
Barrel length
« on: May 15, 2008, 05:59:01 PM »
Rifle barrel length.Is there and if there is what is the regs on barrel length?

Offline Ray

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2007
  • Posts: 6817
  • Location: Kirkland,WA
    • http://www.facebook.com/profile.php?id=1475043431
    • Hunting-Washington
Re: Barrel length
« Reply #1 on: May 15, 2008, 06:06:23 PM »
As far as I knew there was a definition for a modern firearm. I believe there is a minimum length of 4 inches or something like that.
« Last Edit: May 15, 2008, 06:17:47 PM by Ray(huntwa) »

Offline CP

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Mar 2008
  • Posts: 7025
  • Location: Mukilteo
Re: Barrel length
« Reply #2 on: May 15, 2008, 06:08:39 PM »
16" is the min for a rifle.

Offline Ray

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2007
  • Posts: 6817
  • Location: Kirkland,WA
    • http://www.facebook.com/profile.php?id=1475043431
    • Hunting-Washington
Re: Barrel length
« Reply #3 on: May 15, 2008, 06:14:15 PM »
Just curious where it says that.

Here is the reference I know about: http://apps.leg.wa.gov/WAC/default.aspx?cite=232-12-001

It's not exactly the same thing but generally says that a firearm is considered a hangun if shorter than 16 inches. However the shoulder stock part is noteworthy...

   (3) "Handgun" means any pistol, revolver or short firearm with a barrel length of less than sixteen inches and does not have a shoulder stock.

Offline CP

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Mar 2008
  • Posts: 7025
  • Location: Mukilteo
Re: Barrel length
« Reply #4 on: May 15, 2008, 06:18:27 PM »
RCW 9.41.190
Unlawful firearms — Exceptions. 

(1) It is unlawful for any person to manufacture, own, buy, sell, loan, furnish, transport, or have in possession or under control, any machine gun, short-barreled shotgun, or short-barreled rifle; or any part designed and intended solely and exclusively for use in a machine gun, short-barreled shotgun, or short-barreled rifle, or in converting a weapon into a machine gun, short-barreled shotgun, or short-barreled rifle; or to assemble or repair any machine gun, short-barreled shotgun, or short-barreled rifle.



RCW 9.41.010
Terms defined. 

Unless the context clearly requires otherwise, the definitions in this section apply throughout this chapter.

     (1) "Firearm" means a weapon or device from which a projectile or projectiles may be fired by an explosive such as gunpowder.

     (2) "Pistol" means any firearm with a barrel less than sixteen inches in length, or is designed to be held and fired by the use of a single hand.

     (3) "Rifle" means a weapon designed or redesigned, made or remade, and intended to be fired from the shoulder and designed or redesigned, made or remade, and intended to use the energy of the explosive in a fixed metallic cartridge to fire only a single projectile through a rifled bore for each single pull of the trigger.

     (4) "Short-barreled rifle" means a rifle having one or more barrels less than sixteen inches in length and any weapon made from a rifle by any means of modification if such modified weapon has an overall length of less than twenty-six inches.



Offline Ray

  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2007
  • Posts: 6817
  • Location: Kirkland,WA
    • http://www.facebook.com/profile.php?id=1475043431
    • Hunting-Washington
Re: Barrel length
« Reply #5 on: May 15, 2008, 06:19:46 PM »
Thank you

catwithboost

  • Guest
Re: Barrel length
« Reply #6 on: May 15, 2008, 06:24:04 PM »
Well i guess it will be used for Coyotes and marmits. 7.62x39 with a 110gr  :yike: That should put a hurt on a coyote.

Offline CP

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Mar 2008
  • Posts: 7025
  • Location: Mukilteo
Re: Barrel length
« Reply #7 on: May 15, 2008, 06:27:02 PM »
That law doesn't make much sense, but it is a law.  I seen several rifles at the range that are questionable.

 


* Advertisement

* Recent Topics

erronulvin trail cam photos by hunter399
[Today at 02:44:53 AM]


2024 deer. Let’s see um! by dreadi
[Today at 12:02:30 AM]


Jupiter Mountain Rayonier Permit- 621 Bull Tag by MADMAX
[Yesterday at 11:27:22 PM]


1st Quality Deer tag in Washington and its a muzzleloader tag by addicted1
[Yesterday at 11:26:44 PM]


Willapa Hills 1 Bear by bobcat
[Yesterday at 10:36:58 PM]


wyoming pronghorn draw by 280ackley
[Yesterday at 10:22:47 PM]


10 years ago- Now by Ridgerunner
[Yesterday at 09:49:05 PM]


1993 Merc issues getting up on plane by addicted1
[Yesterday at 09:44:51 PM]


Sockeye Numbers by Southpole
[Yesterday at 08:08:59 PM]


Area 11 2025 - Well? by Tinmaniac
[Yesterday at 07:46:11 PM]


White River MF Bull Permit by Kingofthemountain83
[Yesterday at 06:50:13 PM]


Public Land Sale Senate Budget Reconciliation by bigtex
[Yesterday at 05:52:18 PM]


Worksharp belts by JLS
[Yesterday at 04:03:08 PM]


Yakima bow shop by Fireman10
[Yesterday at 03:19:35 PM]


Tree stand for Western Washingtn by addicted1
[Yesterday at 03:06:42 PM]


Early Huckleberry Bull Moose tag drawn! by HillHound
[Yesterday at 01:18:10 PM]


Sportsman Alliance files petition to Gov Ferguson for removal of corrupt WA Wildlife Commissioners by timberfaller
[Yesterday at 12:45:33 PM]


Article on the beaver trapping ban in OR by greenhead_killer
[Yesterday at 12:41:42 PM]


Ten Years, and still plugging along by ghosthunter
[Yesterday at 10:59:16 AM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by scottfrick
[Yesterday at 10:48:11 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal