collapse

Advertisement


Author Topic: Crimping Hornady FTX bullets  (Read 2882 times)

Offline netcoyote

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2010
  • Posts: 1768
  • Location: Olympia, WA
Crimping Hornady FTX bullets
« on: March 12, 2012, 11:15:42 AM »
I'm building up loads for my Marlin 444P and want to try the Hornady FTX 265 gr bullet. I've got a few cartridges loaded and had to get a special seating stem for my RCBS seating die. Now I realize that I am going to have to get some specialized crimp die. My Lee Factory Crimp Die can't be adjusted to work since it is designed for standard length cases and these cases had to be trimmed shorter to accommodate the longer ogive on the FTX bullet. So now I'm committed with this hardware but I need to figure out this crimp problem since this is required for this tube feed rifle.

Anybody ever get into this? Looks like I may have to order a custom crimp die from Lee, but I was wondering if there is another solution. Any ideas?
"...t'aint never a thing wrong with a man such that the mountains can't cure."

Offline wraithen

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2011
  • Posts: 2041
  • Location: JBLMish
Re: Crimping Hornady FTX bullets
« Reply #1 on: April 01, 2012, 09:12:07 AM »
tagged.
the head has been lopped of the eagle.our country has become a nation of losers,them that feed on the teet and can do no more than suckle from them that toil. ~ Rasbo

Offline wraithen

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2011
  • Posts: 2041
  • Location: JBLMish
Re: Crimping Hornady FTX bullets
« Reply #2 on: April 08, 2012, 08:01:01 AM »
After reloading my own ftx's my only advice is not to crimp. I can't get those things to sit with the cannelure low enough anyway. I'm about .005" from it so I'm not going to bother with crimping.
the head has been lopped of the eagle.our country has become a nation of losers,them that feed on the teet and can do no more than suckle from them that toil. ~ Rasbo

Offline netcoyote

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2010
  • Posts: 1768
  • Location: Olympia, WA
Re: Crimping Hornady FTX bullets
« Reply #3 on: April 08, 2012, 08:18:25 AM »
I'm using these in a tube feed magazine; a Marlin 444P. Don't think I want to load rounds in the tube that aren't crimped. I think my only option at this point is to order a custom Lee crimp die ($25) or modify my standard  444 Lee crimp die. I don't want to ruin my standard die so I'll keep that and someday order the Lee custom. Just another expense that I hadn't planned on.
Quote
I'm about .005" from it so I'm not going to bother with crimping.

According to Lee, you don't have to be in the cannelure to use the factory crimp die.

What caliber are you loading for?
"...t'aint never a thing wrong with a man such that the mountains can't cure."

Offline wraithen

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2011
  • Posts: 2041
  • Location: JBLMish
Re: Crimping Hornady FTX bullets
« Reply #4 on: April 08, 2012, 08:33:10 AM »
30-30. Less kick than you're dealing with. I'm currently working up loads so I'll keep a close eye on the ones in the mag and see if they move. I'm more perturbed that the lee dies won't seat the bullet lower for me than anything else. They will still chamber but I'm over the manuals coal by a bit and I wanted to start at book coal. Let me know how the crimp die works out for you. I may have to get one myself if my gun loosens bullets too much.
the head has been lopped of the eagle.our country has become a nation of losers,them that feed on the teet and can do no more than suckle from them that toil. ~ Rasbo

 


* Advertisement

* Recent Topics

Buying pheasants for training by trapp01
[Yesterday at 08:44:40 PM]


Mt. Spokane North Moose by Farmer72
[Yesterday at 08:12:24 PM]


Selkirk bull moose. by 6haase6
[Yesterday at 07:29:05 PM]


Steel Targets??? by jrebel
[Yesterday at 05:30:52 PM]


Greenriver quality Elk permit by First timer
[Yesterday at 03:13:57 PM]


Bow mount trolling motors by Stein
[Yesterday at 09:05:06 AM]


Oregon results posted. by trophyhunt
[Yesterday at 08:51:12 AM]


best draw for moose unit wise by hunter399
[Yesterday at 08:31:10 AM]


Idaho 2025 Controlled Hunts by trophyelk6x6
[Yesterday at 08:24:13 AM]


2025 OILS! by Ridgerunner
[Yesterday at 07:40:49 AM]


FFL preferences or warnings in Olympia or south Sound area? by lhrbull
[Yesterday at 06:59:24 AM]


Nooksack Archery Tag by LongBomb
[Yesterday at 06:29:37 AM]


I’m on a blacktail mission by Turner89
[June 13, 2025, 11:33:35 PM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by scottfrick
[June 13, 2025, 09:54:06 PM]


Basin elk by hughjorgan
[June 13, 2025, 09:50:49 PM]


Getting back into dogs by bearpaw
[June 13, 2025, 09:06:14 PM]


Cowiche Quality Buck by Nwgunner
[June 13, 2025, 08:55:00 PM]


MA-10 Coho by WAcoueshunter
[June 13, 2025, 08:50:46 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal