collapse

Advertisement


Author Topic: Remington 11-87 Assembly Help Nedded  (Read 341 times)

Online pianoman9701

  • Mushroom Man
  • Political Topics
  • Trade Count: (+3)
  • Legend
  • ******
  • Join Date: Mar 2011
  • Posts: 32084
  • Location: Vancouver USA
  • NRA Life, MH, WFW, CCRKBA, NAGR, RMEF, WSB
Remington 11-87 Assembly Help Nedded
« on: April 04, 2020, 01:14:24 PM »
The below part came out while I was disassembling the shotgun. I've never seen it before and could find no assembly videos which show how it goes back in. I've checked the online schematic at the following link and it appears to be a feed latch, part #39. https://www.gunpartscorp.com/gun-manufacturer/remington/1187/parts-list-rem1187.

I can't get this to go back in. If anyone knows how to help, it'd be much appreciated. Thanks.
"Restricting the rights of law-abiding citizens based on the actions of criminals and madmen will have no positive effect on the future acts of criminals and madmen. It will only serve to reduce individual rights and the very security of our republic." - Pianoman

Offline brokentrail

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+1)
  • Hunter
  • ***
  • Join Date: Oct 2016
  • Posts: 116
  • Location: Graham, WA
Re: Remington 11-87 Assembly Help Nedded
« Reply #1 on: April 04, 2020, 01:39:42 PM »
@pianoman9701

If I'm not mistaken, the 870, 1100 and 11-87 feed latches (I've also heard it called a shell latch) work mostly the same and are staked to the receiver.

These videos may help you decipher where it goes in the 11-87



I've also seen some folks talk about using a small amount of epoxy instead of restaking it, once the staking comes loose, mentioned here

https://www.trapshooters.com/threads/reinstalling-the-feed-latch-on-my-11-87-trap.72393/

and here

https://www.shotgunworld.com/bbs/viewtopic.php?t=294034

Hope that may help.

« Last Edit: April 04, 2020, 01:47:07 PM by brokentrail »

Online pianoman9701

  • Mushroom Man
  • Political Topics
  • Trade Count: (+3)
  • Legend
  • ******
  • Join Date: Mar 2011
  • Posts: 32084
  • Location: Vancouver USA
  • NRA Life, MH, WFW, CCRKBA, NAGR, RMEF, WSB
Re: Remington 11-87 Assembly Help Nedded
« Reply #2 on: April 04, 2020, 02:02:07 PM »
Thanks. I may have to do that. It also may be worn. The staking doesn't seem to hold it. I was thinking I might've lost some part that was retaining it. But I watched another video that showed the staking. On the staking, does it just press into place or does it need to slide into place?
"Restricting the rights of law-abiding citizens based on the actions of criminals and madmen will have no positive effect on the future acts of criminals and madmen. It will only serve to reduce individual rights and the very security of our republic." - Pianoman

Offline brokentrail

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+1)
  • Hunter
  • ***
  • Join Date: Oct 2016
  • Posts: 116
  • Location: Graham, WA
Re: Remington 11-87 Assembly Help Nedded
« Reply #3 on: April 04, 2020, 02:13:05 PM »
Once the staking point has become unstaked, in my experience,  it won't hold it again.  You will need to use epoxy on the back side of the latch and clamps or restake it. I've only ever had one come out on me and I used the epoxy method and clamps to fix it.  It hasn't happened again but I don't shoot that gun a ton and thus have it apart a lot to clean it. 

Online pianoman9701

  • Mushroom Man
  • Political Topics
  • Trade Count: (+3)
  • Legend
  • ******
  • Join Date: Mar 2011
  • Posts: 32084
  • Location: Vancouver USA
  • NRA Life, MH, WFW, CCRKBA, NAGR, RMEF, WSB
Re: Remington 11-87 Assembly Help Nedded
« Reply #4 on: April 04, 2020, 02:22:56 PM »
Just to make sure, the fore end curves into the chamber to help extract the shells, correct?
"Restricting the rights of law-abiding citizens based on the actions of criminals and madmen will have no positive effect on the future acts of criminals and madmen. It will only serve to reduce individual rights and the very security of our republic." - Pianoman

Offline JKEEN33

  • Trade Count: (+8)
  • Longhunter
  • *****
  • Join Date: Apr 2010
  • Posts: 875
Re: Remington 11-87 Assembly Help Nedded
« Reply #5 on: April 04, 2020, 02:49:20 PM »
I have one that did the same thing. I epoxied it back in. I was always worried it would come out again but never did. I used it for another two years and now let it sit as a backup. Irritated me that it seems to happen to most of these.

Offline brokentrail

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+1)
  • Hunter
  • ***
  • Join Date: Oct 2016
  • Posts: 116
  • Location: Graham, WA
Re: Remington 11-87 Assembly Help Nedded
« Reply #6 on: April 04, 2020, 06:58:29 PM »
Just to make sure, the fore end curves into the chamber to help extract the shells, correct?

Correct.

Offline BigGoonTuna

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Jun 2009
  • Posts: 2096
  • Location: Rainier
Re: Remington 11-87 Assembly Help Nedded
« Reply #7 on: April 04, 2020, 07:07:30 PM »
Iím guessing you meant magazine tube, not chamber?

Mine falls out of my gun when I take the trigger group out. Having it staked in does make it easier to reassemble but does not seem to affect operation. The trigger pin keeps it from moving front to back and the trigger assembly keeps it from coming out of the slot that it sits in.
you can still get gas in heaven, and a drink in kingdom come,
in the meantime, i'll be cleaning my gun

Online pianoman9701

  • Mushroom Man
  • Political Topics
  • Trade Count: (+3)
  • Legend
  • ******
  • Join Date: Mar 2011
  • Posts: 32084
  • Location: Vancouver USA
  • NRA Life, MH, WFW, CCRKBA, NAGR, RMEF, WSB
Re: Remington 11-87 Assembly Help Nedded
« Reply #8 on: April 05, 2020, 11:28:28 AM »
Iím guessing you meant magazine tube, not chamber?

Mine falls out of my gun when I take the trigger group out. Having it staked in does make it easier to reassemble but does not seem to affect operation. The trigger pin keeps it from moving front to back and the trigger assembly keeps it from coming out of the slot that it sits in.

Yes, magazine tube. Thanks. I was finally able to get the trigger assembly back in and it works. I'll never clean this shotgun again! :chuckle:

Thanks everyone for your help. On to cleaning the pump .22.
"Restricting the rights of law-abiding citizens based on the actions of criminals and madmen will have no positive effect on the future acts of criminals and madmen. It will only serve to reduce individual rights and the very security of our republic." - Pianoman

 


* Advertisement

* Recent Topics

Buying a pistol in Idaho by BULLBLASTER
[Today at 09:33:38 AM]


Trapper association newsletters by Loup Loup
[Today at 09:27:41 AM]


Kapowsin and Eatinville open but NOT White River??? by Tbar
[Today at 09:25:29 AM]


WDFW WCO contact info? by Loup Loup
[Today at 09:16:10 AM]


Time needed shooting to be ready for archery by TriggerMike
[Today at 09:10:36 AM]


Best all around home self Defense options for the lady's by KFhunter
[Today at 09:09:09 AM]


whitetail survey by sjhgraysage
[Today at 09:01:20 AM]


HME Solar Panels by KFhunter
[Today at 08:58:58 AM]


Bigfoot brand trail cams by Skyvalhunter
[Today at 08:54:56 AM]


Hybrid deer by Skyvalhunter
[Today at 08:52:30 AM]


Wdfw survey by vandeman17
[Today at 08:42:26 AM]


black tail with ear tag? by Skyvalhunter
[Today at 08:28:30 AM]


Cz1012 gas-less inertia shotgun black 12 ga like new - $500 by nicz
[Today at 08:23:52 AM]


WTB: Idaho mule deer tag x8 by leonpeon2
[Today at 08:18:09 AM]


wts nikon monarch 5-25x50 scope by bustedoldman
[Today at 07:49:55 AM]


WTB 300 blackout ammo by Salmonmoocher12
[Today at 07:24:09 AM]


Cabela's Alaknak 12-ft. x 12-ft. Tent by tecwoody
[Today at 06:57:27 AM]


Lost dog-cinebar area by Southside
[Today at 06:54:20 AM]


New Elk gun by coachcw
[Today at 06:33:43 AM]


Hunting with my PSE by dilleytech
[Today at 06:27:56 AM]