collapse

Advertisement


Author Topic: Taller front sight  (Read 841 times)

Offline gaolista

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 56
  • Location: Bothell
Taller front sight
« on: June 03, 2020, 06:08:35 PM »
I have an ace in the hole peep and am at the front end of the ramp and shooting low at 100.  I cannot find a shorter front sight for the life me. Any advice? Shooting a CVA Optima v2. Thanks in advance.  The title says Taller, I meant Shorter.

Offline j_h_nimrod

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Aug 2011
  • Posts: 1553
  • Location: Humptulips, WA
Re: Taller front sight
« Reply #1 on: June 03, 2020, 06:46:51 PM »
It should likely be a standard dovetail front sight and not rifle specific. Just measure the height and find a generic replacement with the correct dovetail in a lower height. Look at Midway or Brownellís for a good selection.

Offline gaolista

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 56
  • Location: Bothell
Re: Taller front sight
« Reply #2 on: June 03, 2020, 11:08:15 PM »
It should likely be a standard dovetail front sight and not rifle specific. Just measure the height and find a generic replacement with the correct dovetail in a lower height. Look at Midway or Brownellís for a good selection.
Thanks for the reply. The stock sight isnít a dovetail, so I assume Iíd have to find a dovetail mount too? Iím guessing that is a standard size probably? Thanks for the help!

Offline optic2

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jul 2017
  • Posts: 182
  • Location: Bothell,WA
  • Groups: BHA, RMEF
Re: Taller front sight
« Reply #3 on: June 03, 2020, 11:47:13 PM »
I have an ace in the hole peep and am at the front end of the ramp and shooting low at 100.  I cannot find a shorter front sight for the life me. Any advice? Shooting a CVA Optima v2. Thanks in advance.  The title says Taller, I meant Shorter.

The real issue is that the rear sight is too far forward, it should be right near the back of the barrel right near the breech plug. It is built this way so you can put a rail on the gun for a scope and not have the stock rear sight interfere. The solution to your problem is to get an Eabco peeprib. Once your rear sight is further back then the stock front sight will work just fine. Plus, if you ever want to throw a scope on then you can (hunt in a firearms restricted area or in a state that allow scopes on a muzzy).

https://www.eabco.net/PeepRib-Peep-Sights-for-CVA-Optima-Kodiak-Wolf-and-Accura_p_13910.html

On mine I removed the sight that came with the peeprib and put a Williams ghost ring on it.

Offline gaolista

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 56
  • Location: Bothell
Re: Taller front sight
« Reply #4 on: June 04, 2020, 05:27:21 AM »
I have an ace in the hole peep and am at the front end of the ramp and shooting low at 100.  I cannot find a shorter front sight for the life me. Any advice? Shooting a CVA Optima v2. Thanks in advance.  The title says Taller, I meant Shorter.

The real issue is that the rear sight is too far forward, it should be right near the back of the barrel right near the breech plug. It is built this way so you can put a rail on the gun for a scope and not have the stock rear sight interfere. The solution to your problem is to get an Eabco peeprib. Once your rear sight is further back then the stock front sight will work just fine. Plus, if you ever want to throw a scope on then you can (hunt in a firearms restricted area or in a state that allow scopes on a muzzy).

https://www.eabco.net/PeepRib-Peep-Sights-for-CVA-Optima-Kodiak-Wolf-and-Accura_p_13910.html

On mine I removed the sight that came with the peeprib and put a Williams ghost ring on it.
Thanks for the reply. I have my ace in the hole rail mounted all the way back and my peep is right in front of the plug and Iím still at the end of the ramp. Might need to get the file out.

Offline trophyhunt

  • Forum Sponsor
  • Trade Count: (+9)
  • Explorer
  • *****
  • Join Date: Nov 2008
  • Posts: 12948
  • Location: Wetside
  • Groups: Wa Wild Sheep Life Member
Re: Taller front sight
« Reply #5 on: June 04, 2020, 06:37:39 AM »
I have an ace in the hole peep and am at the front end of the ramp and shooting low at 100.  I cannot find a shorter front sight for the life me. Any advice? Shooting a CVA Optima v2. Thanks in advance.  The title says Taller, I meant Shorter.

The real issue is that the rear sight is too far forward, it should be right near the back of the barrel right near the breech plug. It is built this way so you can put a rail on the gun for a scope and not have the stock rear sight interfere. The solution to your problem is to get an Eabco peeprib. Once your rear sight is further back then the stock front sight will work just fine. Plus, if you ever want to throw a scope on then you can (hunt in a firearms restricted area or in a state that allow scopes on a muzzy).

https://www.eabco.net/PeepRib-Peep-Sights-for-CVA-Optima-Kodiak-Wolf-and-Accura_p_13910.html

On mine I removed the sight that came with the peeprib and put a Williams ghost ring on it.
Thanks for the reply. I have my ace in the hole rail mounted all the way back and my peep is right in front of the plug and Iím still at the end of the ramp. Might need to get the file out.
Same problem with my same gun.  I've bought two sights and both are almost off the rail, my front site (or what ever is closest to end of barrel), is too tall.  sabatloader sent me a fix but I still need to buy it and see.  there is a topic on here with all the info you should need, I just hope it all works out before muzzy season.  It's been a very frustrating time finding both sites that work together.
ďIn common withĒ..... not so much!!

Offline dc

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jun 2010
  • Posts: 216
  • Location: kelso wash.
Re: Taller front sight
« Reply #6 on: June 04, 2020, 06:45:46 AM »
I also bought the optima last yr and have the same issue. 

Offline trophyhunt

  • Forum Sponsor
  • Trade Count: (+9)
  • Explorer
  • *****
  • Join Date: Nov 2008
  • Posts: 12948
  • Location: Wetside
  • Groups: Wa Wild Sheep Life Member
Re: Taller front sight
« Reply #7 on: June 04, 2020, 06:53:44 AM »
I'm hoping this works.     https://www.muzzle-loaders.com/optics/sights/williams-western-precision-muzzleloading-sight-set-cva-traditions-t-c.html              My only concern is will the site at the end of the barrel still be too tall. 
ďIn common withĒ..... not so much!!

Offline gaolista

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 56
  • Location: Bothell
Re: Taller front sight
« Reply #8 on: June 04, 2020, 02:47:14 PM »
I'm hoping this works.     https://www.muzzle-loaders.com/optics/sights/williams-western-precision-muzzleloading-sight-set-cva-traditions-t-c.html              My only concern is will the site at the end of the barrel still be too tall.
Yeah Iíve looked at the globe, but Iím afraid in lowlight situations having the fiber will probably be better.

Offline gaolista

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 56
  • Location: Bothell
Re: Taller front sight
« Reply #9 on: June 04, 2020, 02:48:40 PM »
I have an ace in the hole peep and am at the front end of the ramp and shooting low at 100.  I cannot find a shorter front sight for the life me. Any advice? Shooting a CVA Optima v2. Thanks in advance.  The title says Taller, I meant Shorter.

The real issue is that the rear sight is too far forward, it should be right near the back of the barrel right near the breech plug. It is built this way so you can put a rail on the gun for a scope and not have the stock rear sight interfere. The solution to your problem is to get an Eabco peeprib. Once your rear sight is further back then the stock front sight will work just fine. Plus, if you ever want to throw a scope on then you can (hunt in a firearms restricted area or in a state that allow scopes on a muzzy).

https://www.eabco.net/PeepRib-Peep-Sights-for-CVA-Optima-Kodiak-Wolf-and-Accura_p_13910.html

On mine I removed the sight that came with the peeprib and put a Williams ghost ring on it.
Thanks for the reply. I have my ace in the hole rail mounted all the way back and my peep is right in front of the plug and Iím still at the end of the ramp. Might need to get the file out.
Same problem with my same gun.  I've bought two sights and both are almost off the rail, my front site (or what ever is closest to end of barrel), is too tall.  sabatloader sent me a fix but I still need to buy it and see.  there is a topic on here with all the info you should need, I just hope it all works out before muzzy season.  It's been a very frustrating time finding both sites that work together.
Thanks for the advice. Iíll have to search thru the threads, any chance you have a link to it?

Offline gaolista

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 56
  • Location: Bothell
Re: Taller front sight
« Reply #10 on: June 04, 2020, 02:50:54 PM »
Iím about ready to get the file out, the other part of the equation that I donít know is just how much lower I need to go. If anyone has experience and would have advice thatíd be awesome! Ideally Iíd like to be able to use the whole ramp and not keep the peep cling onto the front end even after the solution.

Offline MeatMissile

  • Trade Count: (+2)
  • Pilgrim
  • *
  • Join Date: Jun 2018
  • Posts: 19
Re: Taller front sight
« Reply #11 on: June 04, 2020, 05:36:55 PM »
I replaced the factory front sight with a Williams .405 fiberoptic front sight.  Its a standard round cut .8 something to fit my barrel.

Offline gaolista

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 56
  • Location: Bothell

Offline gaolista

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 56
  • Location: Bothell
Re: Taller front sight
« Reply #13 on: June 05, 2020, 02:49:34 PM »
I replaced the factory front sight with a Williams .405 fiberoptic front sight.  Its a standard round cut .8 something to fit my barrel.
Might have to go with something like this one. I assume similar to the Williams one that you switched to.

https://www.midwayusa.com/product/1828810516

Offline gaolista

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 56
  • Location: Bothell
Re: Taller front sight
« Reply #14 on: June 06, 2020, 05:36:18 PM »
Well, after going back and forth, Iíve decided to 3D print shims that will go under the peep rail. 3D printed parts are remarkably strong, Iíll just need to get longer screws. Can anyone confirm they are 8-40 sized screws? Iíll keep you posted how it all works out.

 


* Advertisement

* Recent Topics

Pistol Scope Recomendations/Info by Bango skank
[Today at 02:34:03 AM]


FS 2005 Dodge 2500 Cummins long bed *photos added* by jmscon
[Yesterday at 11:57:28 PM]


21 lb pork shoulder, best recipe??? by Fl0und3rz
[Yesterday at 11:53:04 PM]


Neck gaiter face coverings by Jolten
[Yesterday at 11:48:30 PM]


Help! Stuck case by Mulie87
[Yesterday at 11:14:39 PM]


School me on camo by Fl0und3rz
[Yesterday at 11:13:15 PM]


WTS WW2 M1 Garand Matching by Fl0und3rz
[Yesterday at 11:04:59 PM]


Divorce and getting rid of a lot by Fl0und3rz
[Yesterday at 11:04:06 PM]


Best all around home self Defense options for the lady's by SGTDuffman
[Yesterday at 10:48:45 PM]


Glock 36 questions by Fl0und3rz
[Yesterday at 10:37:47 PM]


WTS: VV N565 powder by Magnum_Willys
[Yesterday at 10:25:24 PM]


WDFW seeking input on Coyote contests by Machias
[Yesterday at 09:49:47 PM]


Olympic National Park Goat Hunt Group Anyone? by actionshooter
[Yesterday at 09:44:10 PM]


FS leupold silver 4x12x40 rifle scope by trophyhunt
[Yesterday at 09:41:10 PM]


WTS Bowtech Allegiance by spoonman
[Yesterday at 09:12:56 PM]


March Point Boat Launch by Bearhunter
[Yesterday at 08:46:01 PM]


MA6 Chinook by Mfowl
[Yesterday at 08:27:22 PM]


Tikka t3 forsale or trade by tgray
[Yesterday at 08:10:16 PM]


2016 Jayco x254 trailer by BigVinn
[Yesterday at 08:02:16 PM]


Turkey Beard Display by CaNINE
[Yesterday at 07:57:05 PM]