collapse

Advertisement


Author Topic: Taller front sight  (Read 8424 times)

Offline gaolista

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 70
  • Location: Bothell
Taller front sight
« on: June 03, 2020, 06:08:35 PM »
I have an ace in the hole peep and am at the front end of the ramp and shooting low at 100.  I cannot find a shorter front sight for the life me. Any advice? Shooting a CVA Optima v2. Thanks in advance.  The title says Taller, I meant Shorter.

Offline j_h_nimrod

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Aug 2011
  • Posts: 1597
  • Location: Humptulips, WA
Re: Taller front sight
« Reply #1 on: June 03, 2020, 06:46:51 PM »
It should likely be a standard dovetail front sight and not rifle specific. Just measure the height and find a generic replacement with the correct dovetail in a lower height. Look at Midway or Brownell’s for a good selection.

Offline gaolista

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 70
  • Location: Bothell
Re: Taller front sight
« Reply #2 on: June 03, 2020, 11:08:15 PM »
It should likely be a standard dovetail front sight and not rifle specific. Just measure the height and find a generic replacement with the correct dovetail in a lower height. Look at Midway or Brownell’s for a good selection.
Thanks for the reply. The stock sight isn’t a dovetail, so I assume I’d have to find a dovetail mount too? I’m guessing that is a standard size probably? Thanks for the help!

Offline optic2

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jul 2017
  • Posts: 300
  • Location: Sultan,WA
  • Groups: 2AF, FPC, GOA, BHA, RMEF
Re: Taller front sight
« Reply #3 on: June 03, 2020, 11:47:13 PM »
I have an ace in the hole peep and am at the front end of the ramp and shooting low at 100.  I cannot find a shorter front sight for the life me. Any advice? Shooting a CVA Optima v2. Thanks in advance.  The title says Taller, I meant Shorter.

The real issue is that the rear sight is too far forward, it should be right near the back of the barrel right near the breech plug. It is built this way so you can put a rail on the gun for a scope and not have the stock rear sight interfere. The solution to your problem is to get an Eabco peeprib. Once your rear sight is further back then the stock front sight will work just fine. Plus, if you ever want to throw a scope on then you can (hunt in a firearms restricted area or in a state that allow scopes on a muzzy).

https://www.eabco.net/PeepRib-Peep-Sights-for-CVA-Optima-Kodiak-Wolf-and-Accura_p_13910.html

On mine I removed the sight that came with the peeprib and put a Williams ghost ring on it.

Offline gaolista

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 70
  • Location: Bothell
Re: Taller front sight
« Reply #4 on: June 04, 2020, 05:27:21 AM »
I have an ace in the hole peep and am at the front end of the ramp and shooting low at 100.  I cannot find a shorter front sight for the life me. Any advice? Shooting a CVA Optima v2. Thanks in advance.  The title says Taller, I meant Shorter.

The real issue is that the rear sight is too far forward, it should be right near the back of the barrel right near the breech plug. It is built this way so you can put a rail on the gun for a scope and not have the stock rear sight interfere. The solution to your problem is to get an Eabco peeprib. Once your rear sight is further back then the stock front sight will work just fine. Plus, if you ever want to throw a scope on then you can (hunt in a firearms restricted area or in a state that allow scopes on a muzzy).

https://www.eabco.net/PeepRib-Peep-Sights-for-CVA-Optima-Kodiak-Wolf-and-Accura_p_13910.html

On mine I removed the sight that came with the peeprib and put a Williams ghost ring on it.
Thanks for the reply. I have my ace in the hole rail mounted all the way back and my peep is right in front of the plug and I’m still at the end of the ramp. Might need to get the file out.

Offline trophyhunt

  • Forum Sponsor
  • Trade Count: (+11)
  • Explorer
  • *****
  • Join Date: Nov 2008
  • Posts: 19706
  • Location: Wetside
  • Groups: Wa Wild Sheep Life Member
Re: Taller front sight
« Reply #5 on: June 04, 2020, 06:37:39 AM »
I have an ace in the hole peep and am at the front end of the ramp and shooting low at 100.  I cannot find a shorter front sight for the life me. Any advice? Shooting a CVA Optima v2. Thanks in advance.  The title says Taller, I meant Shorter.

The real issue is that the rear sight is too far forward, it should be right near the back of the barrel right near the breech plug. It is built this way so you can put a rail on the gun for a scope and not have the stock rear sight interfere. The solution to your problem is to get an Eabco peeprib. Once your rear sight is further back then the stock front sight will work just fine. Plus, if you ever want to throw a scope on then you can (hunt in a firearms restricted area or in a state that allow scopes on a muzzy).

https://www.eabco.net/PeepRib-Peep-Sights-for-CVA-Optima-Kodiak-Wolf-and-Accura_p_13910.html

On mine I removed the sight that came with the peeprib and put a Williams ghost ring on it.
Thanks for the reply. I have my ace in the hole rail mounted all the way back and my peep is right in front of the plug and I’m still at the end of the ramp. Might need to get the file out.
Same problem with my same gun.  I've bought two sights and both are almost off the rail, my front site (or what ever is closest to end of barrel), is too tall.  sabatloader sent me a fix but I still need to buy it and see.  there is a topic on here with all the info you should need, I just hope it all works out before muzzy season.  It's been a very frustrating time finding both sites that work together.
“In common with”..... not so much!!

Offline dc

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Jun 2010
  • Posts: 270
  • Location: kelso wash.
Re: Taller front sight
« Reply #6 on: June 04, 2020, 06:45:46 AM »
I also bought the optima last yr and have the same issue. 

Offline trophyhunt

  • Forum Sponsor
  • Trade Count: (+11)
  • Explorer
  • *****
  • Join Date: Nov 2008
  • Posts: 19706
  • Location: Wetside
  • Groups: Wa Wild Sheep Life Member
Re: Taller front sight
« Reply #7 on: June 04, 2020, 06:53:44 AM »
I'm hoping this works.     https://www.muzzle-loaders.com/optics/sights/williams-western-precision-muzzleloading-sight-set-cva-traditions-t-c.html              My only concern is will the site at the end of the barrel still be too tall. 
“In common with”..... not so much!!

Offline gaolista

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 70
  • Location: Bothell
Re: Taller front sight
« Reply #8 on: June 04, 2020, 02:47:14 PM »
I'm hoping this works.     https://www.muzzle-loaders.com/optics/sights/williams-western-precision-muzzleloading-sight-set-cva-traditions-t-c.html              My only concern is will the site at the end of the barrel still be too tall.
Yeah I’ve looked at the globe, but I’m afraid in lowlight situations having the fiber will probably be better.

Offline gaolista

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 70
  • Location: Bothell
Re: Taller front sight
« Reply #9 on: June 04, 2020, 02:48:40 PM »
I have an ace in the hole peep and am at the front end of the ramp and shooting low at 100.  I cannot find a shorter front sight for the life me. Any advice? Shooting a CVA Optima v2. Thanks in advance.  The title says Taller, I meant Shorter.

The real issue is that the rear sight is too far forward, it should be right near the back of the barrel right near the breech plug. It is built this way so you can put a rail on the gun for a scope and not have the stock rear sight interfere. The solution to your problem is to get an Eabco peeprib. Once your rear sight is further back then the stock front sight will work just fine. Plus, if you ever want to throw a scope on then you can (hunt in a firearms restricted area or in a state that allow scopes on a muzzy).

https://www.eabco.net/PeepRib-Peep-Sights-for-CVA-Optima-Kodiak-Wolf-and-Accura_p_13910.html

On mine I removed the sight that came with the peeprib and put a Williams ghost ring on it.
Thanks for the reply. I have my ace in the hole rail mounted all the way back and my peep is right in front of the plug and I’m still at the end of the ramp. Might need to get the file out.
Same problem with my same gun.  I've bought two sights and both are almost off the rail, my front site (or what ever is closest to end of barrel), is too tall.  sabatloader sent me a fix but I still need to buy it and see.  there is a topic on here with all the info you should need, I just hope it all works out before muzzy season.  It's been a very frustrating time finding both sites that work together.
Thanks for the advice. I’ll have to search thru the threads, any chance you have a link to it?

Offline gaolista

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 70
  • Location: Bothell
Re: Taller front sight
« Reply #10 on: June 04, 2020, 02:50:54 PM »
I’m about ready to get the file out, the other part of the equation that I don’t know is just how much lower I need to go. If anyone has experience and would have advice that’d be awesome! Ideally I’d like to be able to use the whole ramp and not keep the peep cling onto the front end even after the solution.

Offline MeatMissile

  • Trade Count: (+9)
  • Hunter
  • ***
  • Join Date: Jun 2018
  • Posts: 247
Re: Taller front sight
« Reply #11 on: June 04, 2020, 05:36:55 PM »
I replaced the factory front sight with a Williams .405 fiberoptic front sight.  Its a standard round cut .8 something to fit my barrel.

Offline gaolista

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 70
  • Location: Bothell

Offline gaolista

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 70
  • Location: Bothell
Re: Taller front sight
« Reply #13 on: June 05, 2020, 02:49:34 PM »
I replaced the factory front sight with a Williams .405 fiberoptic front sight.  Its a standard round cut .8 something to fit my barrel.
Might have to go with something like this one. I assume similar to the Williams one that you switched to.

https://www.midwayusa.com/product/1828810516

Offline gaolista

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 70
  • Location: Bothell
Re: Taller front sight
« Reply #14 on: June 06, 2020, 05:36:18 PM »
Well, after going back and forth, I’ve decided to 3D print shims that will go under the peep rail. 3D printed parts are remarkably strong, I’ll just need to get longer screws. Can anyone confirm they are 8-40 sized screws? I’ll keep you posted how it all works out.

 


* Advertisement

* Recent Topics

DR Clips and Braided Mainline by Woodchuck
[Today at 06:35:33 AM]


Muzzleloader scope options by dc
[Today at 06:21:44 AM]


10 years ago- Now by blindluck
[Today at 06:18:02 AM]


Muzzleloader Scope by trophyhunt
[Today at 06:10:23 AM]


Idaho's new Deer/Elk License System by dvolmer
[Yesterday at 10:11:48 PM]


Pork belly street tacos….. by high_hunter
[Yesterday at 09:32:33 PM]


One of the lucky ones- 108 Douglas Bull Moose by Bryantmaupin
[Yesterday at 09:22:23 PM]


North Idaho Houndsmen Association Field Trial by Machias
[Yesterday at 09:11:13 PM]


2024 deer just got home by greenhead_killer
[Yesterday at 08:54:49 PM]


Gots me a new/old rockchuck rifle coming by Kingofthemountain83
[Yesterday at 07:31:59 PM]


Montana general deer by furbearer365
[Yesterday at 06:29:51 PM]


Big Thank You by str8meat
[Yesterday at 06:08:55 PM]


More Kings! by highside74
[Yesterday at 05:40:53 PM]


HUNTNNW 2025 trail cam thread and photos by huntnnw
[Yesterday at 05:40:02 PM]


Pogue (233) Deer Tag by actionshooter
[Yesterday at 05:32:32 PM]


High buck hunt by builtfordtough
[Yesterday at 05:01:48 PM]


Pinks! by C-Money
[Yesterday at 02:56:56 PM]


Hoof Rot by PsoasHunter
[Yesterday at 11:08:08 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal