collapse

Advertisement


Author Topic: Smoke house build  (Read 1960 times)

Offline 92xj

  • Trade Count: (+21)
  • Frontiersman
  • *****
  • Join Date: May 2009
  • Posts: 3712
  • Location: Out of Place
  • Kill 'em
Smoke house build
« on: November 28, 2022, 09:17:43 AM »
I was able to find a few photos from the build.  Hopefully these help inspire you.
I do not have any measurements currently, but you can determine width and depth by the cinder blocks.
Note that in one of the build photos, I have three rows of blocks.  That was too tall.  I ended up using only two rows.
Also note that I do NOT use wood chips in the cast iron skillet anymore.  I use a pellet tube that I place in the air intake hole.  So much better as I do not have to open the door at all during the cooking process.
I could not find pictures of the exhaust holes but each hole has its own covering and I adjust those each to get it really dialed during a cook.
Anyhow, hopefully these photos will answer all the questions and PMs.
If not, ask away!










"If you have to be crazy to hunt ducks, I do not wish to be sane."

Offline 92xj

  • Trade Count: (+21)
  • Frontiersman
  • *****
  • Join Date: May 2009
  • Posts: 3712
  • Location: Out of Place
  • Kill 'em
Re: Smoke house build
« Reply #1 on: November 28, 2022, 09:19:17 AM »
The sun really beats it up here so instead of staining each year, I just decided to burn the outside with a weed burner. 
"If you have to be crazy to hunt ducks, I do not wish to be sane."

Offline Ryans71

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: May 2011
  • Posts: 30
  • Location: Milton, Wa
Re: Smoke house build
« Reply #2 on: November 28, 2022, 11:49:26 AM »
That's awesome.  How long does a full smoker tube last?  Just wondering how often you'd need to refill it or do you have a second one?

Offline 92xj

  • Trade Count: (+21)
  • Frontiersman
  • *****
  • Join Date: May 2009
  • Posts: 3712
  • Location: Out of Place
  • Kill 'em
Re: Smoke house build
« Reply #3 on: November 28, 2022, 11:54:11 AM »
That's awesome.  How long does a full smoker tube last?  Just wondering how often you'd need to refill it or do you have a second one?

It last about 2.5 hours.  And I only have one.  It takes one second to refill and get it going again.  I run smoke for only 5-7 hours of the cooking process.
"If you have to be crazy to hunt ducks, I do not wish to be sane."

Offline Ryans71

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: May 2011
  • Posts: 30
  • Location: Milton, Wa
Re: Smoke house build
« Reply #4 on: November 29, 2022, 11:30:24 AM »
That's awesome.  How long does a full smoker tube last?  Just wondering how often you'd need to refill it or do you have a second one?

It last about 2.5 hours.  And I only have one.  It takes one second to refill and get it going again.  I run smoke for only 5-7 hours of the cooking process.

Sounds good, thanks! 

Offline Pathfinder101

  • The Chosen YAR
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jan 2009
  • Posts: 11475
  • Location: Southeast WA
  • Semper Primus
Re: Smoke house build
« Reply #5 on: November 29, 2022, 11:41:00 AM »
This is a really cool project.  One day your grandkids are going to talk about "this awesome smokehouse that my grampa had..."  :tup:
Before you criticize someone, you should walk a mile in their shoes.  That way, when you criticize them, you're a mile away and you have their shoes.

Offline Blacklab

  • Site Sponsor
  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Mar 2007
  • Posts: 6798
Re: Smoke house build
« Reply #6 on: November 30, 2022, 04:35:37 AM »
🤑🤑🤑

Thatís perfect size👍 great job. A buddy an I built one several years ago. Loved it just to big for personal use. Imo. Since moving last year. I need another smokehouse.
Hey! I'm not a complete idiot I have parts missing. Though sometimes I wonder.

If you want to make God laugh tell him your plans.

Offline kball4

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Nov 2012
  • Posts: 405
  • Location: Kitsap County
  • Groups: RMEF, NRA
Re: Smoke house build
« Reply #7 on: November 30, 2022, 09:02:07 AM »
Are there any dampeners towards to top to let more smoke/heat escape or does it just go through the wood joints?

Offline pianoman9701

  • Mushroom Man
  • Business Sponsor
  • Trade Count: (+5)
  • Legend
  • *****
  • Join Date: Mar 2011
  • Posts: 39647
  • Location: Vancouver USA
  • WWC, NRA Life, WFW, NAGR, RMEF, WSB, NMLS #2014743
    • www.facebook.com/johnwallacemortgage
    • Apply for a loan
Re: Smoke house build
« Reply #8 on: November 30, 2022, 09:07:51 AM »
That's a really nice smokehouse. Well done.  :tup:
"Restricting the rights of law-abiding citizens based on the actions of criminals and madmen will have no positive effect on the future acts of criminals and madmen. It will only serve to reduce individual rights and the very security of our republic." - Pianoman

Offline 92xj

  • Trade Count: (+21)
  • Frontiersman
  • *****
  • Join Date: May 2009
  • Posts: 3712
  • Location: Out of Place
  • Kill 'em
Re: Smoke house build
« Reply #9 on: November 30, 2022, 09:40:21 AM »
Are there any dampeners towards to top to let more smoke/heat escape or does it just go through the wood joints?

In the early stages of the build pictures, I don't have the exhaust holes cut in.  But the final house does have exhaust ports.  Lots of them, that I can cover individually to really dial it in.
Here is what they look like.


"If you have to be crazy to hunt ducks, I do not wish to be sane."

Offline Blacklab

  • Site Sponsor
  • Non-Hunting & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Mar 2007
  • Posts: 6798
Re: Smoke house build
« Reply #10 on: November 30, 2022, 11:25:13 AM »
Again nicely done. Thanks for sharing.
Hey! I'm not a complete idiot I have parts missing. Though sometimes I wonder.

If you want to make God laugh tell him your plans.

Offline TommyH

  • Political Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Oct 2011
  • Posts: 1948
  • Location: Eastside
Re: Smoke house build
« Reply #11 on: November 30, 2022, 02:20:20 PM »
Thanks, looks great.  :tup:

Offline LDennis24

  • Washington For Wildlife
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Nov 2010
  • Posts: 2962
  • Location: Revere
Re: Smoke house build
« Reply #12 on: November 30, 2022, 02:58:13 PM »
Ooh! I was hoping for this! I didn't think you wanted to share your smokehouse build with us or I would have asked. It seriously crossed my mind several times! Lol Thank you!

Offline 92xj

  • Trade Count: (+21)
  • Frontiersman
  • *****
  • Join Date: May 2009
  • Posts: 3712
  • Location: Out of Place
  • Kill 'em
Re: Smoke house build
« Reply #13 on: November 30, 2022, 03:15:49 PM »
Ooh! I was hoping for this! I didn't think you wanted to share your smokehouse build with us or I would have asked. It seriously crossed my mind several times! Lol Thank you!

Heck, I am always willing.  I actually had a build thread on here years ago, when I actually built it.  The photos went away when photo buckets did their lameness.  Then when I posted up the summer sausage stuff, I had folks mention in the thread and about 15 PMs from folks asking about it. Luckily I was able to find some of the build photos and hosted them with Flickr and was able to post this thread.
Hopefully it helps someone build one and have success at processing their own meat.

Im more than willing to answer any questions about anything and help where I can.
"If you have to be crazy to hunt ducks, I do not wish to be sane."

Offline LDennis24

  • Washington For Wildlife
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Nov 2010
  • Posts: 2962
  • Location: Revere
Re: Smoke house build
« Reply #14 on: November 30, 2022, 03:19:28 PM »
Ok thank you so much! So what brand of smoke tube are you using? And do you have a fan to move smoke in to the box?

 


* Advertisement

* Recent Topics

Governor being sued [emoji12][emoji106] by Timberstalker
[Today at 04:59:59 AM]


Kimber 300WSM almost ready for Africa by jetjockey
[Today at 02:07:16 AM]


Idaho unveils plan to reduce wolf population by bearpaw
[Today at 12:26:59 AM]


We are pursuing a lawsuit against the Governor by bearpaw
[Yesterday at 10:35:22 PM]


Had a Good Morning! by Thermal Predator Control
[Yesterday at 09:59:56 PM]


My Grandpaís Other Bench Leg Bucks. by JBabcock
[Yesterday at 09:49:50 PM]


Bobcat hunt by duckman18
[Yesterday at 09:43:53 PM]


WTB MEC 9000GN 12ga by Encore 280
[Yesterday at 09:36:49 PM]


Wolf Rifle.. by Karl Blanchard
[Yesterday at 09:16:33 PM]


Is winter over yet? by idaho guy
[Yesterday at 09:15:36 PM]


2023 Washington Turkey - Evidence of sex change by brokentrail
[Yesterday at 09:04:31 PM]


WTB:Ruger 10/22 by LECLERC
[Yesterday at 08:20:36 PM]


Lick creek unit 175 by Wizekrakr
[Yesterday at 08:19:03 PM]


Bipartisan support to state delist wolves where the Feds have! by Loup Loup
[Yesterday at 08:17:38 PM]


WTB Tikka T3/T3x superlite by tgray
[Yesterday at 08:16:40 PM]


FS: Hornady classic kit by JBar
[Yesterday at 08:00:37 PM]


Blackmouth by kingking
[Yesterday at 07:49:18 PM]


Wyoming Elk 2023 by CaNINE
[Yesterday at 07:05:03 PM]


FS Knight ultralight olive stock by zwickeyman
[Yesterday at 06:40:29 PM]


Play Free: Hunting-Washington Monthly Lotto! by cem3434
[Yesterday at 06:36:32 PM]

SimplePortal 2.3.7 © 2008-2023, SimplePortal