collapse

Advertisement


Author Topic: Remington Model 11  (Read 752 times)

Offline follow maggie

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3151
  • Location: Fargo
  • Just me, just being a nomad
Remington Model 11
« on: September 15, 2024, 06:23:05 PM »
A couple weeks ago my great uncle gave me his shot gun- a Remington Model 11 with a full choke barrel. It was made in 1946. I want to use it hunting a little bit this year, probably pheasant when the weather is nice & waterfowl from a field on a nice day. Is it ok for the gun to run bismuth shot through it?

Offline ASHQUACK

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Longhunter
  • *****
  • Join Date: Oct 2010
  • Posts: 807
Re: Remington Model 11
« Reply #1 on: September 15, 2024, 06:48:40 PM »
I inherited one like it in 20ga. I have shot bismuth through it a few times. I've used the hevi-bismuth with decent results and no apparent damage. I also have a Belgium a5 20 that I inherited and use the same loads in.

Online wadu1

  • Grumpy
  • Global Moderator
  • Trade Count: (+30)
  • Old Salt
  • *****
  • Join Date: Sep 2008
  • Posts: 6913
  • Location: Tacoma
  • RMEF, DU, NRA, PFE, NWTF
Re: Remington Model 11
« Reply #2 on: September 15, 2024, 06:50:25 PM »
Bismuth will be fine, unless it's marked 2 3/4 check the chamber length. It's in good shape.
"a fronte praecipitium a tergo lupi"

Offline follow maggie

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3151
  • Location: Fargo
  • Just me, just being a nomad
Re: Remington Model 11
« Reply #3 on: September 15, 2024, 06:54:33 PM »
Thanks. It’s stamped 2-3/4” on the barrel. He also gave me a Steven’s 107B single shot 20 gauge break action that’s in good shape, also. The receiver is case hardened. It was his first gun when he was a kid. I can’t find a serial number on it, but it’s probably from the 50s

Online wadu1

  • Grumpy
  • Global Moderator
  • Trade Count: (+30)
  • Old Salt
  • *****
  • Join Date: Sep 2008
  • Posts: 6913
  • Location: Tacoma
  • RMEF, DU, NRA, PFE, NWTF
Re: Remington Model 11
« Reply #4 on: September 15, 2024, 06:59:59 PM »
Thanks. It’s stamped 2-3/4” on the barrel. He also gave me a Steven’s 107B single shot 20 gauge break action that’s in good shape, also. The receiver is case hardened. It was his first gun when he was a kid. I can’t find a serial number on it, but it’s probably from the 50s
A lot of older single shots did not have SN's. SN didn't become mandatory until 1968; I may be wrong on the date.  I have a WIN 37 and a Stevens Fox SXS without SN's.
"a fronte praecipitium a tergo lupi"

Offline follow maggie

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3151
  • Location: Fargo
  • Just me, just being a nomad
Re: Remington Model 11
« Reply #5 on: September 15, 2024, 07:03:20 PM »
I didn’t know that about serial numbers. They’ve both definitely been taken care of over the years. They’re definitely once in awhile nice day guns.

Online wadu1

  • Grumpy
  • Global Moderator
  • Trade Count: (+30)
  • Old Salt
  • *****
  • Join Date: Sep 2008
  • Posts: 6913
  • Location: Tacoma
  • RMEF, DU, NRA, PFE, NWTF
Re: Remington Model 11
« Reply #6 on: September 15, 2024, 07:34:49 PM »
Remington Model 11 were made from 1911 - 1948. The Remington Collectors has a list of SN"s by date, it's neat to find out the manufacturing date. I picked up a L.C. Smith SXS 20ga, found out it was made in 1926, and it has 2 1/2 chambers. I also have two Parker SXS in 12ga one 1919 and the other is 1923. 
"a fronte praecipitium a tergo lupi"

Offline follow maggie

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3151
  • Location: Fargo
  • Just me, just being a nomad
Re: Remington Model 11
« Reply #7 on: September 15, 2024, 07:41:17 PM »
I love those old shot guns. I really have a thing for shot guns. I found the manufacture date of mine on remingtonsociety.org. I’d like to get an LC Smith or Parker someday.

Offline brokenvet

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: May 2011
  • Posts: 589
  • Location: Lacey
  • Groups: NRA, Marlin Owners, M14forum
Re: Remington Model 11
« Reply #8 on: September 16, 2024, 08:39:57 AM »
Nice,
You may want to change the springs on your Rem 11 specially if your thinking about using for waterfowl.

Those waterfowl loads are pretty strong.

Arts gun shop sells the kit, but his website is not working at the moment.  You may want to call. 
Semper FI

"This year will go down in history. For the first time, a civilized nation has full gun registration. Our streets will be safer, our police more efficient, and the world will follow our lead into the future!" -Adolf Hitler,1935"

Online wadu1

  • Grumpy
  • Global Moderator
  • Trade Count: (+30)
  • Old Salt
  • *****
  • Join Date: Sep 2008
  • Posts: 6913
  • Location: Tacoma
  • RMEF, DU, NRA, PFE, NWTF
Re: Remington Model 11
« Reply #9 on: September 16, 2024, 05:05:47 PM »
I didn’t know that about serial numbers. They’ve both definitely been taken care of over the years. They’re definitely once in awhile nice day guns.
Follow up with the SN. The Gun Control Act of 1968 was signed into law October 22, 1968, required SN's from then on.
"a fronte praecipitium a tergo lupi"

Offline chukardogs

  • Trade Count: (+3)
  • Scout
  • ****
  • Join Date: Aug 2009
  • Posts: 292
  • Location: Shoreline
Re: Remington Model 11
« Reply #10 on: September 16, 2024, 05:28:02 PM »
Can a 2 1/2 inch chamber be cut to a 2 3/4 relatively easy and would it be safe? Unless it's worth a lot of money, where are you going to get 2 1/2 inch shells?

Online wadu1

  • Grumpy
  • Global Moderator
  • Trade Count: (+30)
  • Old Salt
  • *****
  • Join Date: Sep 2008
  • Posts: 6913
  • Location: Tacoma
  • RMEF, DU, NRA, PFE, NWTF
Re: Remington Model 11
« Reply #11 on: September 16, 2024, 05:47:26 PM »
Can a 2 1/2 inch chamber be cut to a 2 3/4 relatively easy and would it be safe? Unless it's worth a lot of money, where are you going to get 2 1/2 inch shells?
Some shotguns may have enough material to rechamber to 2 3/4. But if you are doing it to an older collectable, I would not do it. You can still buy 2 1/2" shells, RST or S&B, they are not cheap. I'm getting setup to roll crimp 20 and 12. For the 20, trim the hull to 2 1/2 about .250 off. I'll be using 14.3gr of 20/28 with a CB0078-20 wad overshot card then roll the mouth.
"a fronte praecipitium a tergo lupi"

Offline follow maggie

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jun 2008
  • Posts: 3151
  • Location: Fargo
  • Just me, just being a nomad
Re: Remington Model 11
« Reply #12 on: September 16, 2024, 07:27:23 PM »
Thanks for the tip on Arts Guns. I’ll give him a call. I’ve seen 2-1/2” shells online. I wonder if you could reload your own & cut a longer shell down before loading to make it 2-1/2?

Offline Chiwaukum

  • Trade Count: (+1)
  • Pilgrim
  • *
  • Join Date: Feb 2019
  • Posts: 6
  • Location: Maple Valley
Re: Remington Model 11
« Reply #13 on: September 16, 2024, 09:38:57 PM »
I purchased a Model 11 from a fellow member last year. Mine dates to 1920. Replaced the springs with a kit from Art’s. I shot 3 boxes or so of 2 3/4 Boss bismuth through it with zero problems. 12 ga full choke, 28” barrel. Set the friction ring to “heavy” (instructions for this come with the kit from Art’s). Love how this shotgun comes to the shoulder with the sight picture right where it needs to be. Seemed to pattern just fine with the bismuth #5’s.

 


* Advertisement

* Recent Topics

Huckleberry early bull moose by Rutnbuxnbulls
[Today at 02:27:48 PM]


My sisters first elk by scottfrick
[Today at 01:57:08 PM]


Piebald by elkaholic123
[Today at 12:58:29 PM]


Fatal fishing guide boat sinking near Hood River by Blacklab
[Today at 11:34:51 AM]


Coyote trees a bobcat by LDennis24
[Today at 10:53:10 AM]


Last RainShadow Labradors Litter has arrived! by rainshadow1
[Today at 10:45:51 AM]


Muzzy Mission Quality!!! by Whitefoot400
[Today at 09:49:39 AM]


Campbell Global -- Snoqualmie Tribe Purchase? by bigtex
[Today at 09:03:09 AM]


Cleaning different brand muzzys by addicted1
[Today at 08:55:48 AM]


Who hunts with a jack ass? by 300rum
[Today at 08:29:15 AM]


Grass Fed Beef by C-Money
[Today at 08:08:02 AM]


Governor's tag by elkrack
[Today at 08:04:40 AM]


Alaska 2024 moose hunt by Rainier10
[Today at 08:03:02 AM]


My sister drew the desert early rifle tag! by C-Money
[Today at 07:53:02 AM]


scopes and success by chukardogs
[Today at 07:06:36 AM]


only 10 days to hunt by kodiak06
[Today at 04:35:34 AM]


2024 Elk Success Thread by elkrack
[Yesterday at 11:05:30 PM]


He messed up by actionshooter
[Yesterday at 09:31:13 PM]


Bearpaw Season 2024 by bearpaw
[Yesterday at 07:58:20 PM]


Blue Mountain foothills west? by dilleytech
[Yesterday at 07:08:36 PM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal