collapse

Advertisement


Author Topic: Arrow fletching question  (Read 3422 times)

Offline akashasdaddy

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jul 2011
  • Posts: 195
  • Location: aberdeen/olympia
Arrow fletching question
« on: August 11, 2012, 11:04:20 PM »
So I went to Cabelas today to pick up my broadheads and some more arrows. I found that there are many different types of fletching and was wondering if anyone would be kind enough to clue me in.
Right now I have fletchings that are short on the shaft but wide bodied (if that makes any sense) To me it seems that the shafts that have a longer fletching may fly a little more true.
governments are instituted among MEN,deriving their just powers from the consent of the governed,that whenever ANY form of GOVERNMENT becomes DESTRUCTIVE of these ends, it is the RIGHT of the people to alter or to ABOLISH it,and institute a NEW government

Offline Todd_ID

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Apr 2008
  • Posts: 2926
  • Location: Clarkston
  • Hunt Hard!
Re: Arrow fletching question
« Reply #1 on: August 11, 2012, 11:17:01 PM »
It's likely that you have Blazer vanes (Bohning brand) since they are the most wide-spread vane in use now.  They look small, but they perform big.  They are much more stiff than a normal 4" vane, so they are able to exert the same amount of righting force as a longer but weaker vane would.  Plus, they're lighter, so you pick up a bit of speed.
Bring a GPS!  It's awkward to have to eat your buddies!

Offline akashasdaddy

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jul 2011
  • Posts: 195
  • Location: aberdeen/olympia
Re: Arrow fletching question
« Reply #2 on: August 12, 2012, 11:47:56 AM »
Thank you for the info. I am brand new to anything archery related and this is just one of many questions I will be asking on the subject I'm sure.
governments are instituted among MEN,deriving their just powers from the consent of the governed,that whenever ANY form of GOVERNMENT becomes DESTRUCTIVE of these ends, it is the RIGHT of the people to alter or to ABOLISH it,and institute a NEW government

Offline Johnb317

  • johnb317
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2011
  • Posts: 673
  • Location: Bellevue, WA
Re: Arrow fletching question
« Reply #3 on: August 12, 2012, 12:26:02 PM »
I shoot a 4fletch blazer full helical, nice stabilization for broad heads
Talk to your local archery shop, also huntersfriend.com has some good information.
Old enough to know better.
Young enough to go for it.

Offline worldsworsthunter

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Sep 2011
  • Posts: 17
  • Location: Spokane
Re: Arrow fletching question
« Reply #4 on: August 13, 2012, 11:44:12 PM »
The smaller vanes such as vanetec and blazers are stiffer than say a longer vane so basically you will gain minimal speed with there being less drag and weight. Vane size not nearly important as arrow spine and length.

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31529
  • Location: Goldendale,WA
Re: Arrow fletching question
« Reply #5 on: August 13, 2012, 11:57:26 PM »
The smaller vanes such as vanetec and blazers are stiffer than say a longer vane so basically you will gain minimal speed with there being less drag and weight. Vane size not nearly important as arrow spine and length.

I hate to say it but that is spot on. Who knew the worldsworsthunter could give info that was correct :chuckle: Just don't go around saying I learned that from worldsworsthunter :chuckle: :tup:
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline Todd_ID

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Apr 2008
  • Posts: 2926
  • Location: Clarkston
  • Hunt Hard!
Re: Arrow fletching question
« Reply #6 on: August 14, 2012, 01:35:21 AM »
The smaller vanes such as vanetec and blazers are stiffer than say a longer vane so basically you will gain minimal speed with there being less drag and weight. Vane size not nearly important as arrow spine and length.

I hate to say it but that is spot on. Who knew the worldsworsthunter could give info that was correct :chuckle: Just don't go around saying I learned that from worldsworsthunter :chuckle: :tup:
:chuckle:  :yeah:
Bring a GPS!  It's awkward to have to eat your buddies!

Offline fly4fish

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Feb 2009
  • Posts: 266
  • Location: WA
Re: Arrow fletching question
« Reply #7 on: August 14, 2012, 09:32:38 AM »
Short vanes look better and perform well.  For broadheads you will want a full helical to help spin and stabilize them; it will tighten your groups a lot.

Offline sirmissalot

  • Past Sponsor
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Sep 2011
  • Posts: 3070
  • Location: Shelton, WA
    • chadpburgess@faceboo​k.com
Re: Arrow fletching question
« Reply #8 on: August 14, 2012, 09:54:09 AM »
Ever since I switched to Blazers I've never had a problem shooting broadheads. I've never seen a reason to shoot 4 vanes, 3 with a good helical works great for me. These are 2" Blazers.

Offline Johnb317

  • johnb317
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2011
  • Posts: 673
  • Location: Bellevue, WA
Re: Arrow fletching question
« Reply #9 on: August 14, 2012, 10:58:16 AM »
 :yeah:  yup. I shoot 4 cause that's how Bill at the knockpoint does them.  He says 4 does a better job of stabilizing the arrow and I see no reason to argue.  I shoot a whisker biscuit and get decent groups so at this point it's not broken so I'm not fixing it.
Old enough to know better.
Young enough to go for it.

 


* Advertisement

* Recent Topics

DR Clips and Braided Mainline by Happy Gilmore
[Yesterday at 11:58:04 PM]


Idaho's new Deer/Elk License System by dvolmer
[Yesterday at 10:11:48 PM]


Pork belly street tacos….. by high_hunter
[Yesterday at 09:32:33 PM]


One of the lucky ones- 108 Douglas Bull Moose by Bryantmaupin
[Yesterday at 09:22:23 PM]


North Idaho Houndsmen Association Field Trial by Machias
[Yesterday at 09:11:13 PM]


2024 deer just got home by greenhead_killer
[Yesterday at 08:54:49 PM]


Gots me a new/old rockchuck rifle coming by Kingofthemountain83
[Yesterday at 07:31:59 PM]


Montana general deer by furbearer365
[Yesterday at 06:29:51 PM]


Big Thank You by str8meat
[Yesterday at 06:08:55 PM]


More Kings! by highside74
[Yesterday at 05:40:53 PM]


HUNTNNW 2025 trail cam thread and photos by huntnnw
[Yesterday at 05:40:02 PM]


Pogue (233) Deer Tag by actionshooter
[Yesterday at 05:32:32 PM]


High buck hunt by builtfordtough
[Yesterday at 05:01:48 PM]


Pinks! by C-Money
[Yesterday at 02:56:56 PM]


Muzzleloader scope options by MADMAX
[Yesterday at 02:26:44 PM]


Hoof Rot by PsoasHunter
[Yesterday at 11:08:08 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal