reloading steel shot

[buglin4bulls]

I am going to start reloading my steel shot waterfowl loads. I am curious if anyone has any good 1 1/4oz #2 shot recipes or what they have found successful in the past for a duck/goose combo? Thanks for any advise. 

[bowNarrow]

I load a Remington nitro hull (black one)
30 gr of Alliant steel powder
B&P 35 wad
Fed 209 primer
1 1/4 #2 shot
It runs about 1400 fps
I get 90% pattern at 40 yards with a kicks high flyer full choke out of a stoeger 3500

[buglin4bulls]

I load a Remington nitro hull (black one)
30 gr of Alliant steel powder
B&P 35 wad
Fed 209 primer
1 1/4 #2 shot
It runs about 1400 fps
I get 90% pattern at 40 yards with a kicks high flyer full choke out of a stoeger 3500

thanks that looks like a good load

[bowNarrow]

Makes a good BB load as well

[buglin4bulls]

I am having a hard time with finding that wad? is there any other 1 1/4 oz steel shot wads out there.

[bowNarrow]

Precision reloading and ballistic products usually have them.. But there is other wads

[AWS]

Spend a couple of bucks and buy a good shotshell manual, they cost about the price of one box of shells(good ones)

http://www.ballisticproducts.com/Reloading-Manuals/products/16/