collapse

Advertisement


Author Topic: Had to work up a round  (Read 2425 times)

Offline demontang

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jul 2008
  • Posts: 3412
  • Location: Selah
Had to work up a round
« on: October 08, 2008, 11:44:11 AM »
I went looking for some ammo and couldn't find what I normally shot deer with (nosler AB/BT). A box of rem or federals was $40-60+ and all I found was cor locks or partitions. So I decided to try and get a load worked up before deer season. I'm shooting a 338 win and I had pickup some 200gr CT Nosler ballistic tips so I was part way there. I spent a few days on line and look though reloading books to see what powder looked good and settled on IMR 4350. I spent the first part of this week getting the cases ready, and this morning I went out and started to test some loads. I started at 69.6gr of powder and shot about a 4-5" group :yike:, then I started up the scale and at 71gr of powder I got about a 3" group. I got to 73.5gr of powder(.5gr under max) and shot about a .75" group and have no signs of pressure :IBCOOL: It only cost me $1 a shot now too.

Offline Huntbear

  • I am a BAD Kitteh
  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Nov 2007
  • Posts: 9616
  • Location: Wandering Lost East of the Mountains
  • Y.A.R. Jester aka Smart Ass
    • http://www.facebook.com/profile.php?id=1236486665
Re: Had to work up a round
« Reply #1 on: October 08, 2008, 04:04:53 PM »
Welcome to the economical way to shoot, and hunt.  I have been handloading for years, and if I did not, then I would not shoot near as much as I do.
By my honorable conduct as a hunter let me give a good example and teach new hunters principles of honor, so that each new generation can show respect for their god, other hunters and the animals, and enjoy the dignity of the hunt.

Calling an illegal alien an 'undocumented immigrant' is like calling a drug dealer an 'unlicensed pharmacist'.

Offline Curly

  • Trade Count: (+2)
  • Legend
  • ******
  • Join Date: Mar 2007
  • Posts: 20921
  • Location: Thurston County
Re: Had to work up a round
« Reply #2 on: October 08, 2008, 04:11:29 PM »
Congrats on finding your load quickly.  Man, that 200 gr bullet must be screaming out of the .338. :o
May I always be the kind of person my dog thinks I am.

><((((º>` ><((((º>. ><((((º>.¸><((((º>

Offline demontang

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jul 2008
  • Posts: 3412
  • Location: Selah
Re: Had to work up a round
« Reply #3 on: October 08, 2008, 06:15:34 PM »
I use to reload for my 22-250 and have every thing for my 223 just havent done it since 223 is so cheap. After seeing ammo prices and needing to shot my 338 more I fingured I could make up about 100rds for the cost of 20.

Its pushing 2900-3000fps with around 3900ftlb of energy.  I dont have a crono but it doesnt take long to go 500yards and punch a hole in 1/2" plate :chuckle:

Heres a ballistics chart on it it shoot flat :mgun:

Range (yards)                Muzzle   50     100    200    300    400      500
Velocity (fps)                 2950   2836   2724  2509   2305   2109    1924
Energy (ft.-lb.)               3865   3571   3295  2796   2358   1976    1644
Trajectory (200 yd. zero) -1.5    0.6      1.6    0.0     -7.1   -20.8    -42.3
Come Up in MOA             -1.5   -1.1    -1.5    0.0     2.3      5.0       8.1

Offline Huntbear

  • I am a BAD Kitteh
  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Nov 2007
  • Posts: 9616
  • Location: Wandering Lost East of the Mountains
  • Y.A.R. Jester aka Smart Ass
    • http://www.facebook.com/profile.php?id=1236486665
Re: Had to work up a round
« Reply #4 on: October 09, 2008, 06:23:38 AM »
On my brother's and my .338.  We sight ours in 2.5 in. high at 100 yards.  Absolutely dead on out to 400 yrds.  My brother knocked a bull flat at 410 yrds 3 yrs. ago, the bullet went in at the chest, and was lodged in his butt.
By my honorable conduct as a hunter let me give a good example and teach new hunters principles of honor, so that each new generation can show respect for their god, other hunters and the animals, and enjoy the dignity of the hunt.

Calling an illegal alien an 'undocumented immigrant' is like calling a drug dealer an 'unlicensed pharmacist'.

Offline demontang

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jul 2008
  • Posts: 3412
  • Location: Selah
Re: Had to work up a round
« Reply #5 on: October 09, 2008, 08:12:51 AM »
I have mine sighted for about 225yd or 2" at 100yd, I dont have to hold over tell 400yd and at 700yd with my scope on 24 power I can put my last mildot on a target and dead center it :)

 


* Advertisement

* Recent Topics

2025 deer, let's see em! by RoostrCogburn
[Today at 12:54:56 AM]


Possible record bull? by Whitefoot
[Today at 12:17:56 AM]


Hancock/Manulife........No Trespassing signs everywhere! What's the deal. by PsoasHunter
[Yesterday at 10:35:26 PM]


Idaho on the verge of outlawing by HUNTIN4SIX
[Yesterday at 10:26:14 PM]


Mt. St. Helens Goat by Pudelguy
[Yesterday at 09:29:59 PM]


Let’s see ur heavy pack out pics by Berner5
[Yesterday at 09:18:43 PM]


Research Request - Deer, Moose & Elk Samples by cjc23
[Yesterday at 09:09:08 PM]


CITES hide sealer and Fur Harvesters Receiving Agent info Pt 1 by Frank The Tank
[Yesterday at 08:53:02 PM]


We lost one of our own (Colockumelk) by cem3434
[Yesterday at 08:46:12 PM]


Looking for Taxidermist Recommendations by Dan-o
[Yesterday at 08:38:27 PM]


Color phase fox by Frank The Tank
[Yesterday at 08:30:28 PM]


Found tripod by royalbull
[Yesterday at 06:49:42 PM]


My new BB Gun by hollymaster
[Yesterday at 06:48:48 PM]


2025 Deer season/hunter399 by bb76
[Yesterday at 06:10:17 PM]


GROUSE 2025...the Season is looming! by Houmike
[Yesterday at 03:16:47 PM]


re-barreling a gun by pickardjw
[Yesterday at 02:20:48 PM]


Moose Hunt - Mt. Spokane North - Late Season Advice by shafump86
[Yesterday at 12:39:58 PM]


2021 bear had been previously shot before I killed him by logola512c
[Yesterday at 12:30:45 PM]


Selling Pistols and rifles by Rat44
[Yesterday at 10:58:30 AM]


Cabelas Pro-Series decoys by Hilltop123
[Yesterday at 10:41:50 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal