collapse

Advertisement


Author Topic: Set off someone elses Foxpro  (Read 2925 times)

Offline snowshoes22

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jun 2012
  • Posts: 707
  • Location: Grant County
Set off someone elses Foxpro
« on: November 13, 2013, 05:43:11 PM »
A couple days ago i was out calling with my cousin. On our third stand we hiked in a little ways above a local lake. About 11 minutes into the stand i hit the mute button on my foxpro and about 200 yards to my right there is a loud howl. It sounded funny like a recording. I wait a couple minutes and hit the mute button again to turn the sound back on and again there is a howl to our right. I glass the hillside and in the brush 200 yards away is a guy all camo'd out in the sage brush. I don't know if we were there first or if he was? It really caught me off guard. We picked up and left. He never made a sound while we were there other than when i turned on his call. I have called a lot and have never ran into another predator hunter. has anyone else ever turned on someone elses call?
"I'd rather have a slow hit than a fast miss"

Offline BOWHUNTER45

  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Nov 2009
  • Posts: 14731
Re: Set off someone elses Foxpro
« Reply #1 on: November 13, 2013, 05:46:43 PM »
That's creepy ...So your saying all Fox pros are wired So they all work with each other  :dunno: If So I really do not need one .... :chuckle:

Offline snowshoes22

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jun 2012
  • Posts: 707
  • Location: Grant County
Re: Set off someone elses Foxpro
« Reply #2 on: November 13, 2013, 05:48:20 PM »
I couldn't change his call sound just mute and unmute it  :dunno:
"I'd rather have a slow hit than a fast miss"

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31531
  • Location: Goldendale,WA
Re: Set off someone elses Foxpro
« Reply #3 on: November 13, 2013, 05:50:07 PM »
I am no expert but I bet they will work with each other. I don't think they are coded to the machine they are sold with.

Not a foxpro story but I had a radar detector in my old truck. I was sitting in it one day and was playing with my range finder I pointed it out the passage window and went to range and it set my radar detector off and it scared the crap out of me :chuckle: Don't know why but your story reminded me of it.
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline Heredoggydoggy

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Nov 2010
  • Posts: 5041
  • Location: Wenatchee
  • Team I'M TOO OLD FOR THIS $H!T !
Re: Set off someone elses Foxpro
« Reply #4 on: November 13, 2013, 06:15:11 PM »
A while back, a friend and I were hunting coyotes, and we both had Foxpros.  Different models, but we were close enough together so that I began to notice that my caller was changing sounds "by itself".  The only thing I could think of was that his remote was affecting the base unit of mine.  There was also a billboard near where I parked that was full of LEDs, and when I parked near it, my remote wouldn't lock my truck doors.  I thought this was unusual until I saw someone else nearby having trouble with his remote, too.  :dunno: 
If it was easy, everybody would be doing it.

When Bernie Madoff did it, it's called a "Ponzi Scheme"
When Government does it, it's called "Social Security"

Offline fair-chase

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2010
  • Posts: 1618
  • Location: Tri-Cities WA
Re: Set off someone elses Foxpro
« Reply #5 on: November 13, 2013, 06:37:39 PM »
Just change the channel/frequency setting on your remote and it should solve the problem. Most people run their remotes on the factory set channel/frequency and never change it. Therefore you have many units running on the same frequency. Change it up, pick a random channel and you should be good to go.

Offline Heredoggydoggy

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Nov 2010
  • Posts: 5041
  • Location: Wenatchee
  • Team I'M TOO OLD FOR THIS $H!T !
Re: Set off someone elses Foxpro
« Reply #6 on: November 14, 2013, 08:16:00 AM »
Just change the channel/frequency setting on your remote and it should solve the problem. Most people run their remotes on the factory set channel/frequency and never change it. Therefore you have many units running on the same frequency. Change it up, pick a random channel and you should be good to go.


Didn't even know you could do this.  Don't know how.  Wouldn't even try.  You are supposed to be able to take the micro-chip out of the unit to load more sounds on it.  I can't figure out how to get the chip out without breaking it, so the unit stays "as shipped". You must remember that a good many of us old guys are afraid of the new technology.  A 9 year old could probably do it--I can't.  :chuckle:
If it was easy, everybody would be doing it.

When Bernie Madoff did it, it's called a "Ponzi Scheme"
When Government does it, it's called "Social Security"

Offline calib

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jan 2009
  • Posts: 700
  • Location: spokane, coeur d alene
Re: Set off someone elses Foxpro
« Reply #7 on: November 14, 2013, 02:11:50 PM »
too bad you couldn't mess with him more ha ha

Offline furiouzgeorge

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Feb 2012
  • Posts: 425
  • Location: Whidbey
Re: Set off someone elses Foxpro
« Reply #8 on: November 15, 2013, 09:26:58 AM »
I was a mile and a half off the road on the other side of a "Pass" that you had to hike over. I set up near a creek and started calling. Twenty or thirty minutes later I heard what sounded like a fawn bleat back toward the hillside. I waited a bit, then called back toward it. It responded. I called twice. It called twice. I called three times, it called three times.

I promptly pulled the orange out of my pack and put it in. Didn't year another call all night.
"Timid men prefer the calm of despotism to the tempestuous sea of liberty. " ~ Thomas Jefferson

Offline Jingles

  • WA State Trappers Association
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Mar 2011
  • Posts: 3868
  • Location: Methow Valley 98862
Re: Set off someone elses Foxpro
« Reply #9 on: November 19, 2013, 06:38:25 PM »
I was a mile and a half off the road on the other side of a "Pass" that you had to hike over. I set up near a creek and started calling. Twenty or thirty minutes later I heard what sounded like a fawn bleat back toward the hillside. I waited a bit, then called back toward it. It responded. I called twice. It called twice. I called three times, it called three times.

I promptly pulled the orange out of my pack and put it in. Didn't year another call all night.

Not o hijack the thread but that is the reason I now only hunt private property.
HMC/USN/RET
1969 -1990
The comments of this poster do not reflect the opinions of HUNTWA Administrators or Moderators unless they so state.

The duty of a Patriot is to protect his country from it's government

Offline furiouzgeorge

  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Feb 2012
  • Posts: 425
  • Location: Whidbey
Re: Set off someone elses Foxpro
« Reply #10 on: November 22, 2013, 09:19:34 AM »
Its a pretty strong argument for hunting private land thats for sure. Speaking of thread-jacking, my original comment is out of context...never used a fox pro and it took a while to realize y'all were talking about setting off with remotes.
"Timid men prefer the calm of despotism to the tempestuous sea of liberty. " ~ Thomas Jefferson

 


* Advertisement

* Recent Topics

Mt. St. Helens Goat by trophyhunt
[Today at 12:07:51 PM]


Blood in the Snow | A Wolf Hunt by 2MANY
[Today at 11:47:06 AM]


It's Starting by salmosalar
[Today at 11:15:09 AM]


Quality Archery Opener by Squatch200
[Today at 11:03:26 AM]


Testing the waters *backyard bow stand* by highside74
[Today at 11:02:12 AM]


Any advice? Hunting where 2 gmus meet by buglebuster
[Today at 10:41:10 AM]


Lost - Swarovski EL Range 10x42 Skamania County by Atlas1993
[Today at 10:04:31 AM]


Bear behavior by dylan34_36
[Today at 07:45:09 AM]


Muzzleloader scope options by JBar
[Today at 06:27:50 AM]


Fullsized Truck Opinion: HiMiNew vs LoMiOlder by Boss .300 winmag
[Today at 05:22:53 AM]


2024 Elk Success Thread by redi
[Today at 04:36:31 AM]


Cannon or Scotty downrigger? by huntnphool
[Yesterday at 10:41:17 PM]


2025 Quality Chewuch Tag by 2MANY
[Yesterday at 10:36:00 PM]


Traditions Hawken Woodsman need repair? by Night goat
[Yesterday at 10:09:34 PM]


Hunting alone - May need support by Angus
[Yesterday at 07:54:21 PM]


2025 deer, let's see em! by TeacherMan
[Yesterday at 04:43:25 PM]


CWD testing in ALL 100 series GMU's is now mandatory by nwwanderer
[Yesterday at 03:55:27 PM]


Scotty Pulling Slow by Stein
[Yesterday at 03:23:49 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal