collapse

Advertisement


Author Topic: Had my first down rigger mishap today.  (Read 6892 times)

Offline gasman

  • Washington For Wildlife
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 6377
  • Location: Tacoma,wa
Had my first down rigger mishap today.
« on: March 16, 2014, 02:07:10 PM »
Soooooooooooo, today while fishing American Lake for Kokes, the call of nature was a gurgling and we had to pull up and get to the launch so I can take care of business, I was bringing up the Down rigger ball while reeling in my pole and heard a snap, then plunk  :yike:

I looked down and the DR was still running and the ball was gone, broke off  :bash: :bash: :bash: :bash: :bash:

I turned it off and notice some debris caught up in the front pulley, grabbed it off and seen my stoppers stuck up in it  :bash:

Apon investigation, I figured what happen was, the debris was caught on the line, moved up to the pulley, got caught, slid both stoppers down line until the weight hit the pulley and SNAP............... Broken line  :bash: :bash: :bash: :bash: :bash: :bash:

Im sure this only the first of many mishaps with learning the in and out's of down rigger fishing  :dunno:




Didnt get a single bite all morning. Talked a guy in a Kayak that had one in the boat and lost a few others.

Three people in the boat, different depths, different bait, all with the same results............... Nothing  :fishin:
Gasman


It's 5 O'clock somewhere.......

Offline Mfowl

  • Political & Covid-19 Topics
  • Trade Count: (+6)
  • Frontiersman
  • *****
  • Join Date: Jul 2012
  • Posts: 4396
  • Location: westside
Re: Had my first down rigger mishap today.
« Reply #1 on: March 16, 2014, 02:11:13 PM »
I've had my stopper get hung up/fouled up with debris before. It usually doesn't break the gear off though. What type of cable are you using? Braid? How many lbs is your ball? Is it a Scotty or Cannon?
Fish hard, hunt harder!

Offline huntnphool

  • Chance favors the prepared mind!
  • Political & Covid-19 Topics
  • Trade Count: (+15)
  • Legend
  • ******
  • Join Date: Apr 2007
  • Posts: 32899
  • Location: Pacific NorthWest
Re: Had my first down rigger mishap today.
« Reply #2 on: March 16, 2014, 02:13:14 PM »
One reason I still use cable.
The things that come to those who wait, may be the things left by those who got there first!

Offline Tman

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Nov 2008
  • Posts: 629
  • Location: Washington
Re: Had my first down rigger mishap today.
« Reply #3 on: March 16, 2014, 02:26:17 PM »
Had that happen too. Sucks! 

Wait till you get one hung up on the bottom of a river. That'll make ya scramble.

Offline gasman

  • Washington For Wildlife
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 6377
  • Location: Tacoma,wa
Re: Had my first down rigger mishap today.
« Reply #4 on: March 16, 2014, 02:35:17 PM »
Braided line with or had a 10 lb ball  :chuckle: :chuckle:

I will be the first to admit, I'm new to DR fishing. This is the first one I have owned and picked it up from a forum member last week. Works good, I just need to lear what to not do and what to watch for  :chuckle: :chuckle: :chuckle: :chuckle:
Gasman


It's 5 O'clock somewhere.......

Offline FC

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: May 2010
  • Posts: 3954
  • Location: Wa
Re: Had my first down rigger mishap today.
« Reply #5 on: March 16, 2014, 03:00:08 PM »
Braid sure seems to break easily, I've bounced bottom many times and yarded up all sorts of underwater crap. The only time I have ever been seriously concerned was last coho season when I hung up on something at about 140 feet down and suddenly both downriggers started spooling cable like crazy (I was in about 600 feet). I don't know what it was (net maybe?) but I had to stop the boat and back up to gain line back. Whatever it was just came off after 10 minutes or so and left no evidence on any of my gear (I got everything back). I've only re-done the cable ends one time I think in 3 years and it was due to fraying.
The reason there are so many Ruger upgrades is because they're necessary.

Offline aaronoto

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Feb 2012
  • Posts: 443
  • Location: NW WA
Re: Had my first down rigger mishap today.
« Reply #6 on: March 16, 2014, 03:20:34 PM »
That's sucks, and with the price of downrigger balls these days it hurts the pocket book too.  Happens to all of us eventually though…  I've never had debris foul up a downrigger when reeling it up, but I've caught a downrigger ball on the bottom, running steel cable with the drag a little too tight.  Let me tell you, it's amazing how much one of those arms can flex without breaking!

Offline mkcj

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Jul 2007
  • Posts: 1945
  • Location: Seatac/Winthrop,Wash
Re: Had my first down rigger mishap today.
« Reply #7 on: March 16, 2014, 03:59:05 PM »
Were you using the red braid stops or the yellow or black cable stops? because the yellow and black will slide very easy on braid.

Offline flinger

  • Washington For Wildlife
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: May 2010
  • Posts: 983
  • Location: Milton
Re: Had my first down rigger mishap today.
« Reply #8 on: March 16, 2014, 03:59:47 PM »
Yup it,s definitely a learning thing. Went through about 5 last season 1st year with electric. I think 3 were on braid  :bash:
Switched back to 180 cable ,until I am convinced otherwise no more braid for me.The ones lost on cable were nothing but beginner mistakes :twocents:
SEE YA IN THE FIELDS
        FLINGER

Offline gasman

  • Washington For Wildlife
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 6377
  • Location: Tacoma,wa
Re: Had my first down rigger mishap today.
« Reply #9 on: March 16, 2014, 04:23:45 PM »
Were you using the red braid stops or the yellow or black cable stops? because the yellow and black will slide very easy on braid.

one black and one yellow.
Gasman


It's 5 O'clock somewhere.......

Offline mkcj

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Jul 2007
  • Posts: 1945
  • Location: Seatac/Winthrop,Wash
Re: Had my first down rigger mishap today.
« Reply #10 on: March 16, 2014, 04:33:27 PM »
Were you using the red braid stops or the yellow or black cable stops? because the yellow and black will slide very easy on braid.

one black and one yellow.

That's the main reason, use 2 red stops or better yet go to this system! you can make it or by the setup from scotty. it's what I use and really works in many ways.
http://www.sportfishingbc.com/forum/showthread.php?26796-scotty-sure-stop-s

You can lift a 15lb ball into the boat with your hands using tuna cord, try doing that with cable or braid

Offline ICEMAN

  • Site Sponsor
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: May 2007
  • Posts: 15575
  • Location: Olympia
  • The opinionated one... Y.A.R. Exec. Staff
Re: Had my first down rigger mishap today.
« Reply #11 on: March 16, 2014, 09:12:25 PM »
Yeah down rigger mishaps can be sad....or quite funny depending on your perspective.

One year off Cape Flattery I watched my dads fishing buddy hook up the big torpedo ball on his rig...ease it over the side....then his gear slipped the ratchet and it took off for the bottom, peeling out cable, then BANG-the ratchet caught and snapped off the huge weight.... Lots of cussing.... So he reels it up and clamps on another gear set. His rigger did it again, another 12+lber to the bottom. Man was he pissed...  :yike:
molṑn labé

A Knuckle Draggin Neanderthal Meat Head

Kill your television....do it now.....

Don't make me hurt you.

“I don't feel we did wrong in taking this great country away from them. There were great numbers of people who needed new land, and the Indians were selfishly trying to keep it for themselves.”  John Wayne

Offline Come Get Some

  • Business Sponsor
  • Trade Count: (+9)
  • Longhunter
  • *****
  • Join Date: Sep 2013
  • Posts: 561
  • Location: Roy
Re: Had my first down rigger mishap today.
« Reply #12 on: March 16, 2014, 09:28:41 PM »
 A few years ago at Westport ,we were fishing for Kings. Both of my Cannon Digitroll IV's tripped at the same time. To our surprise they did not release and let the rod tips come up  instead both rods pegged to the water. Both downriggers started spooling cable. I hit auto up on the starboard rigger. It seemed to come free. When the port rigger was put in auto up the wire started going away from the boat like it was coming to the surface. Both rods were still spooling line. To our surprise a 16' Great white jumped 6' out of the water 15' behind my boat with all of my gear ,including the downrigger ball in his mouth. His eyes were rolled back and his mouth was wide open. He hit the water and LEFT the scene. I grabbed the spool of my downrigger. He took almost all of the 500' of cable off of the spool . I was finally able to clamp down hard enough that it broke the 150lb steel cable. My buddy said. "we need a bigger boat" A week later a commercial fisherman in a 40' boat caught a 16' great white. It drug them for almost an hour before they killed it. Wish I had a video camera running.

Offline ICEMAN

  • Site Sponsor
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: May 2007
  • Posts: 15575
  • Location: Olympia
  • The opinionated one... Y.A.R. Exec. Staff
Re: Had my first down rigger mishap today.
« Reply #13 on: March 16, 2014, 09:33:02 PM »
Holy smokes, I might have peed myself on that one...scary.
molṑn labé

A Knuckle Draggin Neanderthal Meat Head

Kill your television....do it now.....

Don't make me hurt you.

“I don't feel we did wrong in taking this great country away from them. There were great numbers of people who needed new land, and the Indians were selfishly trying to keep it for themselves.”  John Wayne

Offline sAsQuAtCh17

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Aug 2012
  • Posts: 14
  • Location: Maricopa County
  • Groups: NRA
Re: Had my first down rigger mishap today.
« Reply #14 on: March 16, 2014, 09:40:17 PM »
A few years ago at Westport ,we were fishing for Kings. Both of my Cannon Digitroll IV's tripped at the same time. To our surprise they did not release and let the rod tips come up  instead both rods pegged to the water. Both downriggers started spooling cable. I hit auto up on the starboard rigger. It seemed to come free. When the port rigger was put in auto up the wire started going away from the boat like it was coming to the surface. Both rods were still spooling line. To our surprise a 16' Great white jumped 6' out of the water 15' behind my boat with all of my gear ,including the downrigger ball in his mouth. His eyes were rolled back and his mouth was wide open. He hit the water and LEFT the scene. I grabbed the spool of my downrigger. He took almost all of the 500' of cable off of the spool . I was finally able to clamp down hard enough that it broke the 150lb steel cable. My buddy said. "we need a bigger boat" A week later a commercial fisherman in a 40' boat caught a 16' great white. It drug them for almost an hour before they killed it. Wish I had a video camera running.
If you had by some freak chance managed to catch that thing it would be the fish story to end all fish stories!

 


* Advertisement

* Recent Topics

Son drawn - Silver Dollar Youth Any Elk - Help? by HntnFsh
[Today at 08:09:48 PM]


Toutle Quality Bull - Rifle by HntnFsh
[Today at 08:09:14 PM]


Bear behavior by Brute
[Today at 07:50:36 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by WoolyRunner
[Today at 06:39:13 PM]


2025 Montana alternate list by Wingin it
[Today at 06:28:33 PM]


A lonely Job... by AL WORRELLS KID
[Today at 03:53:25 PM]


MA-10 Coho by WAcoueshunter
[Today at 02:08:31 PM]


KODIAK06 2025 trail cam and personal pics thread by kodiak06
[Today at 01:52:01 PM]


Blue Mtn Foothills West Rifle Tag by Trooper
[Today at 01:18:40 PM]


GROUSE 2025...the Season is looming! by Dave Workman
[Today at 01:01:22 PM]


50 inch SXS and Tracks? by jrebel
[Today at 11:20:33 AM]


Sockeye Numbers by Southpole
[Today at 11:12:46 AM]


3 pintails by metlhead
[Today at 11:07:43 AM]


Modified game cart... 🛒 by Dan-o
[Today at 08:44:37 AM]


Velvet by Brute
[Today at 08:37:08 AM]


Calling Bears by hunter399
[Today at 06:12:44 AM]


HUNTNNW 2025 trail cam thread and photos by kodiak06
[Today at 05:43:11 AM]


Lizard Cam by NOCK NOCK
[Today at 04:48:54 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal