collapse

Advertisement


Author Topic: Benchbucks  (Read 16488 times)

Offline buckbrush

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Nov 2008
  • Posts: 66
  • Location: Renton
Benchbucks
« on: December 06, 2008, 06:54:58 AM »
Anybody hear of "benchbucks"?  Just wondering if this was a local term used where I grew up or it is used in other areas. 

Offline boneaddict

  • Site Sponsor
  • Administrator
  • Trade Count: (0)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50602
  • Location: Selah, Washington
Re: Benchbucks
« Reply #1 on: December 06, 2008, 07:04:55 AM »
I guess I have heard of bench-leg but not just short benchbucks.

Offline sportsman002001

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Sep 2008
  • Posts: 200
  • Location: Chehalis, Wa
Re: Benchbucks
« Reply #2 on: December 06, 2008, 07:22:36 AM »
I would have to guess they are meaning bench leg bucks.  They are found down around White Salmon and on the back side of White pass and I am sure many other places.  They are deer that are cross bread with Muley and Blacktail.  That is what I have always heard when I hear of a bench leg buck.

Offline archery288

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Oct 2007
  • Posts: 2227
  • Location: Auburn
Re: Benchbucks
« Reply #3 on: December 06, 2008, 07:25:04 AM »
I would have to guess they are meaning bench leg bucks.  They are found down around White Salmon and on the back side of White pass and I am sure many other places.  They are deer that are cross bread with Muley and Blacktail.  That is what I have always heard when I hear of a bench leg buck.

Same meaning, and they are on the West side of the mtns as well.... I think the term is meant more for the ones on the west side then the ones on the eastside of the pass... Pretty much related to the deer around the Pacific Crest Trail...

Offline 270Shooter

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Oct 2008
  • Posts: 3828
  • Location: Yakima
Re: Benchbucks
« Reply #4 on: December 06, 2008, 08:19:49 AM »
In the state record books aren't they called Cascade Blacktailed deer? We have them in Klickitat county and most of western yakima county.

Offline boneaddict

  • Site Sponsor
  • Administrator
  • Trade Count: (0)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50602
  • Location: Selah, Washington
Re: Benchbucks
« Reply #5 on: December 06, 2008, 08:27:44 AM »
Just a classification of the deer harvested in that zone.  THey can be pureblood muley and or blacktail and still be considered that. At least in regards to the state, Boone hasn't gone that far.  Benchlegs are pretty obvious crossbred deer usually.

Offline fishunt247

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Nov 2008
  • Posts: 896
  • Location: Yakima, WA
Re: Benchbucks
« Reply #6 on: December 06, 2008, 10:50:41 AM »
I don't want to start anythng, but in the washington books there is a buck that I heard was shot in the yakima canyon above roza dam (Peyser's wifes buck) that is entered as a cascade blacktail. And there are a bunch of deer entered from yakima co. Either I misread the boundaries or something, cause that doesn't make any sense to me. Does anybody know more on this?

Offline boneaddict

  • Site Sponsor
  • Administrator
  • Trade Count: (0)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50602
  • Location: Selah, Washington
Re: Benchbucks
« Reply #7 on: December 06, 2008, 10:53:01 AM »
As far as I knew, that wasn't in the boundary.  I killed one up on the top of Bethel and though it was obviously a benchleg...mostly blacktail, it had to be entered as a Mule deer.

Offline blacktail luv

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Nov 2008
  • Posts: 543
  • Location: White Salmon
  • Shed Hunting Fool
Re: Benchbucks
« Reply #8 on: December 06, 2008, 10:59:48 AM »
I live in White Salmon and i know our deer here are classified as the cascade blacktails, even though most of them look like pure bread blackies, to me.  I know the mule deer line is the greyback unit, which is more or less the klickitat river about ten miles east of me.  Once you get east of the town of lyle the deer definately have some mulie in them, there racks look different as do there bodies.  Most of them still have the "blacktail"  not a tail like a mule deer.

Offline 270Shooter

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Oct 2008
  • Posts: 3828
  • Location: Yakima
Re: Benchbucks
« Reply #9 on: December 06, 2008, 12:23:13 PM »
Nearly all of the deer I see in the cowiche unit are benchlegs. Look at the tail on this doe.

Offline Ridgerunner

  • Trade Count: (+2)
  • Old Salt
  • ******
  • Join Date: Mar 2007
  • Posts: 5111
  • Location: Enumclaw
Re: Benchbucks
« Reply #10 on: December 06, 2008, 02:14:20 PM »
99% of the deer I've seen in bumping and rimrock units were benchlegs.

Offline flyguide

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Mar 2008
  • Posts: 229
  • Location: Ellensburg, Washington
    • https://www.facebook.com/redshunting
    • Red's Fly Shop and Hunting
Re: Benchbucks
« Reply #11 on: December 07, 2008, 01:42:06 PM »
I would say that the Ellensburg area is about 50% Benchlag/50% Mule Deer, lots of overlap here.

Dream, Plan, Fish, Hunt.

Offline bankwalker

  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Nov 2007
  • Posts: 2515
  • Location: Matlock
Re: Benchbucks
« Reply #12 on: December 07, 2008, 02:37:58 PM »
I would say that the Ellensburg area is about 50% Benchlag/50% Mule Deer, lots of overlap here.



ive never seen any buck or doe in the e-burg area that i would call a benchleg. but i have seen quite a few in the snoqualmie pass area that were a forsure cross.

i had a couple does and a small 3pt jump infront of me and a semi this season and the semi hit the buck. i had to stop and check it out and the rack was very small just like a blacktail 3pt but it had a mulie tail. ive never seen a 3pt or even a 2pt mulie with a rack so small. so imo it had to be a benchleg

Offline boneaddict

  • Site Sponsor
  • Administrator
  • Trade Count: (0)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50602
  • Location: Selah, Washington
Re: Benchbucks
« Reply #13 on: December 07, 2008, 02:43:13 PM »
HE is about right....depending on what side of E burg you are standing.  Those in the Naneum are muleys or tend to be, those up Manastash and Robinson are often benchlegs.

Offline Red Dawg

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Nov 2007
  • Posts: 1945
  • Location: Granger, WA
Re: Benchbucks
« Reply #14 on: December 07, 2008, 03:04:42 PM »
Here is a roman nose with a black tail.

 


* Advertisement

* Recent Topics

Idaho Trapping Journal 2025/26 by bearpaw
[Today at 01:01:18 AM]


Your Idea of the perfect bull elk by carpsniperg2
[Today at 12:54:39 AM]


TEN TIPS FOR GREAT FIELD PHOTOS - A strategy for taking quality success photos by FlyFish360
[Today at 12:52:29 AM]


How to get big game rules changed? by FlyFish360
[Today at 12:45:04 AM]


“Recreational trappers”? by Humptulips
[Yesterday at 10:36:49 PM]


GROUSE 2025...the Season is looming! by Humptulips
[Yesterday at 10:25:47 PM]


Searing prime rib by huntnnw
[Yesterday at 10:24:57 PM]


Define Wide by builtfordtough
[Yesterday at 10:22:00 PM]


Winchester SX3 problem by CNEDUX
[Yesterday at 09:14:55 PM]


Winthrop wolves by KP-Skagit
[Yesterday at 08:38:05 PM]


Ice fishing for walleye by Jpmiller
[Yesterday at 06:28:33 PM]


Perfect 4 by NOCK NOCK
[Yesterday at 06:14:20 PM]


35 whelen by Night goat
[Yesterday at 05:41:23 PM]


Learning his ducks by metlhead
[Yesterday at 04:07:20 PM]


GSP Breeders- looking for GSP puppy by gallion_t
[Yesterday at 02:41:10 PM]


Curvy Damascus Utility Fighter by A. Cole
[Yesterday at 02:38:47 PM]


Big changes to skamania county boat launching by dilleytech
[Yesterday at 01:44:52 PM]


Idaho on the verge of outlawing by bearpaw
[Yesterday at 12:02:52 PM]


Nice bachelor herd by nwwanderer
[Yesterday at 06:06:25 AM]


Montana Cutting Deer Licenses by hughjorgan
[December 22, 2025, 08:18:03 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal