AK picture thread

[GrainfedMuley]

Thanx TRD1911, That is a nice looking rifle. The folding stock these days go for a pretty penny. But with that rear trunion, it can have a solid stock also. The three guns I posted at the top of this thread were all based on Romy "G" kits. Even the pistol. They are the most common kits and assemble really nice.
  Thanx for the link to your friends FB page. I love gun porn. He has some really nice toys. Is he in eastern Washington? I asked because Most of the pics of him looked like the east side. Did he machine the 80% AR lower and finish the cast upper?

[TRD1911]

Hes local to Kitsap but travels east a lot for long range competition. I believe some of the photos on there were from the JC Steel Challenge but I may be wrong.

Now that you mention the Romy "G" kits, I believe you are correct. I remember not being real particular which one I slapped together since it was my first "build". If I was to build another I would like to mimic the Khyber Pass side folders and SBR it. I started building a Mak90 on an 80% receiver but ran out of time and it has sat in a box about 70% complete for the past 3 years. I just need to press in the front trunion and trigger guard rivets and it would be good to go (hopefully).

Here's the Mak90 - (notice the lack of photographic skills and crude tools, ha!)

[TRD1911]

Here are my china girls 

Pre-Ban Polytech Legend and Polytech AKM Spiker 

I'll take the dark-haired one on the left. So purty.
 

[GrainfedMuley]

I have the tooling and the press if you want to finish it up. Pressing the barrel into the trunion is not too hard and then you have to press the barrel pin in place. But before that you will want to do the trigger guard. If you are missing any rivets or the barrel pin, I have extras. Shoot me a PM and we can set things up. I am in Puyallup.

[phishisgroovin]

My Mak90
Milled.

as i got it.



It was Fuugly, had to take a day and purty it up a bit.









this was a project i did awhile back.

[Jonathan_S]

I legitimately thought I was coming on this thread to see pictures of Alaska 

Carry on gentlemen

[GrainfedMuley]

My Mak90
Milled.

as i got it.



It was Fuugly, had to take a day and purty it up a bit.









this was a project i did awhile back.

Make it more purty and change the stock and add a hand grip, thread the barrel for a flash suppressor and ad a cleaning rod. I would also change the front sight tower and replace it with one that will accept a bayonet. Just my  . Mak-90 stands for modified AK 1990's after the Clinton import ban. That is why they had a thumb hole stock no flash suppressor and no bayonet lug. They do shoot real nice and the milled receiver is worth a little more than a stamped receiver.   

[GrainfedMuley]

I legitimately thought I was coming on this thread to see pictures of Alaska 

Carry on gentlemen

HHhmmm.........an Alaska picture thread in the guns and ammo section.......................

[Jonathan_S]

I legitimately thought I was coming on this thread to see pictures of Alaska 

Carry on gentlemen

HHhmmm.........an Alaska picture thread in the guns and ammo section.......................

I.................. just......................... saw it in recent topics  

[GrainfedMuley]

I don't want this thread to die so here is another pic of my latest build. I got a good deal on the parts and I did not want to pass them up. 7.62x39 pistol.





I know more of you gun guys have some more pics to post. Let's see them.

[TRD1911]

  Do you have plans to SBR any of them?

[GrainfedMuley]

Maybe, I have not really thought of doing that. They are pretty stable shooting with a tight one point sling.

[nastybynature]

We have an AR picture thread so I though I would start an AK picture thread. Post up pics of your AK's



more coming

NICE!! Guessing you are partial to .30 cal? 

[GrainfedMuley]

No not really. I have several rifles in several different calibers. I just like "guns". Plus, since I built all the AK's I have, that is part of it also. I have gone on to build several other rifles also. AR's from 80% receivers, HK's, I even built a M1 carbine.

[GrainfedMuley]

ebusa, I thought you would like this. I found a Polytech Legend just like your for sale on Uzitalk.com. I thought it would give you an idea of what yours may be worth. It looks just like yours.


WTS- POLYTech Ledgend AK-47



A very nice weapon in 98% cond. ( one owner ) Bought new , Safe Queen .
 Low round count
 Import ;KFS Atlanta,ga. (386) P47
 AK-47 / S
 Calib. 7.62x39 mm
 Beijing China

 Will ship from Kentucky 40143 ) (your FFL must except from a NONE FFL Me $35 And insured to full value) ( if not ? FFL to FFL will be $50 shipping )
 Local sale must go to FFL

 weapon sold AS IS in picture; 3 - chinese Flat back mags , sling , Bayonet is NOT CHINESE But locks in place , NO BOX , Sorry......
 Bolt is spring loaded ....
 Upper HG has a small ding , easy fix . LITE STORAGE marks hear and there .. in all great shape

 **********No Trades ....Cash is king************

 $2,800 Taking CASH OFFERS ONLY