collapse

Advertisement


Author Topic: Tube skinning a yote  (Read 6097 times)

Offline gasman

  • Washington For Wildlife
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 6377
  • Location: Tacoma,wa
Tube skinning a yote
« on: January 04, 2009, 06:51:11 PM »
Can someone explain to me how to tube skin a coyote.
I know it probably has been explained before but can not find it.

Thanks
Peter
Gasman


It's 5 O'clock somewhere.......

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: Tube skinning a yote
« Reply #1 on: January 04, 2009, 07:07:01 PM »
What are you cutting this for?  To tan?  To Mount?

For tanning only cut from one back foot along the back of the leg.  Through the anus to the same spot on the oposite foot.  Split the tail all the way to the tip on the bottom side of the tail.  You need to remove the bone.

Now just tube it.  If you are going to take it to a taxidermist to tan you can leave the skull and feet in.  If not than you will need to remove them.

When removing the skull cut next to the skull.  When removing the toes I usually seperate them and hold them with a pair of plyers and remove the entire toe bone to the toe nail joint.

Offline gasman

  • Washington For Wildlife
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 6377
  • Location: Tacoma,wa
Re: Tube skinning a yote
« Reply #2 on: January 04, 2009, 07:10:05 PM »

Now just tube it. 

Can you explain how?
Gasman


It's 5 O'clock somewhere.......

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: Tube skinning a yote
« Reply #3 on: January 04, 2009, 07:13:52 PM »
Yeah spit the tail on the underside and than cut from one foot along the back of the leg through the anus and up the back of the other leg to the other foot.

Now just start skinning.  Don't cut the skin any more.  You are basiclly inverting the skin.  Like taking off a sock.

Offline gasman

  • Washington For Wildlife
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 6377
  • Location: Tacoma,wa
Re: Tube skinning a yote
« Reply #4 on: January 04, 2009, 07:16:19 PM »
Thank you very much........
Gasman


It's 5 O'clock somewhere.......

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: Tube skinning a yote
« Reply #5 on: January 04, 2009, 07:16:53 PM »
Did you understand?

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: Tube skinning a yote
« Reply #6 on: January 04, 2009, 07:18:04 PM »
What are you skinning this for?

Offline gasman

  • Washington For Wildlife
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 6377
  • Location: Tacoma,wa
Re: Tube skinning a yote
« Reply #7 on: January 04, 2009, 07:26:10 PM »
Nothing specific at this time (i have not killed one yet), just need to know for when the occation arrises.

I would like to do a at least a rug on my first yote if it's not mangy.

Peter

Do you or know of any one that buys or trades for coyote hides?
I do plan on shooting more than one but will not be keeping all the hides, it i knew of someone that wanted them, it would be nice to see them used for something and not go to waste.
Gasman


It's 5 O'clock somewhere.......

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: Tube skinning a yote
« Reply #8 on: January 04, 2009, 07:36:58 PM »
If you are skinning it to make a rug than you are goin to want to cut it differently.  I would suggest taking the coyote right to the taxidermist and letting them skin it out. 

As for buying hides you may want to try a local fur buyer.  Even them your not going to get alot.  In the round and unskinned your looking at less than $15.

If you want to skin it for a rug refer to the post I made in the Bear Forum.  It is a sticky at the top of the list and will give you instructions.

You run into problems or don't understand the instructions you call me and I will talk you through it.

Offline littlebuf

  • official YAR pack mule
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Dec 2008
  • Posts: 2773
  • Location: orting
  • TeamYARwetspot-leavin other teams in da wetspot
Re: Tube skinning a yote
« Reply #9 on: January 10, 2009, 12:49:38 PM »
hey Michelle maybe i should start a new thread but your already on this one, could you give me some pointers on tanning? i really want to tan my own coyote hide, im good with a knife but ive never tanned any thing, id need help from the ground up on this, im wanting to learn the basics of taxidermy so one day i can maybe train to be one ( what id like to do when i retire) any help would be great thanks
No people will tamely surrender their Liberties, nor can any be easily subdued, when knowledge is diffused and Virtue is preserved. On the Contrary, when People are universally ignorant, and debauched in their Manners, they will sink under their own weight without the Aid of foreign Invaders.

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: Tube skinning a yote
« Reply #10 on: January 10, 2009, 06:24:35 PM »
Go to www.taxidermy.com 

* Click on Tanning Chemicals

* Click on Mammal Tanning Kits

The kit that you are looking for is called Rittel's EZ100 Tanning Kit.  I have used this process for the past 8 years.  All you need to do is follow the diresctions in the box.  If you have questions about the process I can help.

 


* Advertisement

* Recent Topics

Anybody breeding meat rabbit? by HighlandLofts
[Today at 08:36:13 PM]


Colorado Results by cem3434
[Today at 08:35:51 PM]


NEED ADVICE: LATE after JUNE 15th IDAHO BEAR by Sliverslinger
[Today at 08:31:23 PM]


Alaska Fishing Guide and Lodge Recommendations by Jamieb
[Today at 08:21:25 PM]


New York deer by HighlandLofts
[Today at 08:17:24 PM]


Resetting dash warning lights by Sandberm
[Today at 08:13:27 PM]


Please Report Problems & Bugs Here by Mossy
[Today at 06:17:02 PM]


What's flatbed pickup life like? by Special T
[Today at 05:52:28 PM]


Oregon spring bear by Fidelk
[Today at 04:58:27 PM]


Idaho General Season Going to Draw for Nonresidents by idahohuntr
[Today at 01:51:40 PM]


Seekins PH2 & Element sale by BigJs Outdoor Store
[Today at 12:40:26 PM]


Kokanee Fishing Tournament!! 🎣 June 13-14, Joseph OR by WRKG4GD
[Today at 11:42:02 AM]


wings wings and more wings! by birddogdad
[Today at 11:00:11 AM]


Survey in ? by hdshot
[Today at 10:55:39 AM]


Jim Horn's elk calling, instructional audio CD's. by WapitiTalk1
[Today at 09:46:03 AM]


DIY Ucluelet trip by WAcoueshunter
[Today at 07:46:51 AM]


Wyoming elk who's in? by link
[Today at 07:00:33 AM]


CVA Optima V2 durasight rail mod by craigapphunt
[Today at 05:56:00 AM]


Last year putting in… by wa.hunter
[Yesterday at 11:02:00 PM]


HUNTNNW 2025 trail cam thread and photos by huntnnw
[Yesterday at 10:34:36 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal