collapse

Advertisement


Author Topic: county line mckenna  (Read 2766 times)

Offline fillthefreezer

  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Aug 2011
  • Posts: 1486
  • Location: tacoma
  • @adventure_sd
county line mckenna
« on: January 11, 2016, 08:13:47 PM »
anyone have work done at county line in mckenna before?

duckmen1

  • Guest
Re: county line mckenna
« Reply #1 on: January 11, 2016, 08:31:22 PM »
I brought a traditions muzzleloader in there once a few years back. The gun would not fire any caps on the first pull of the trigger. You would have to work the action a couple more times and keep pulling the trigger and eventually the cap would fire. He kept my gun for months saying that it was just needing the firing pin replaced. After making a stop in and checking on it he then claimed it was bad caps and firing pin was fine. Even though I bought several brands as well as both musket and # 11 caps. Said he would look into it more after he would not show me the gun actually functioned how he said. Months and months went by and went back in for him to try and tell me that my whole problem was bad powder not the caps. What he was trying to say made no sense since the cap would not go off to ignight the powder. I immediately the gun right there and never got it fixed just got a new gun. That last day he smelled strongly of alcohol and cigarettes. Bad service from my experience.

Offline jay.sharkbait

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Old Salt
  • ******
  • Join Date: Jun 2013
  • Posts: 6507
Re: county line mckenna
« Reply #2 on: January 12, 2016, 07:19:15 AM »
I brought a traditions muzzleloader in there once a few years back. The gun would not fire any caps on the first pull of the trigger. You would have to work the action a couple more times and keep pulling the trigger and eventually the cap would fire. He kept my gun for months saying that it was just needing the firing pin replaced. After making a stop in and checking on it he then claimed it was bad caps and firing pin was fine. Even though I bought several brands as well as both musket and # 11 caps. Said he would look into it more after he would not show me the gun actually functioned how he said. Months and months went by and went back in for him to try and tell me that my whole problem was bad powder not the caps. What he was trying to say made no sense since the cap would not go off to ignight the powder. I immediately the gun right there and never got it fixed just got a new gun. That last day he smelled strongly of alcohol and cigarettes. Bad service from my experience.

Well Countyline was sold several months back and I do not know the new owners.

I do know that the previous owner was a good guy with above average firearms knowledge. He didn't seem to be a smoker or a drinker.

Offline Bofire

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 5524
  • Location: Yelm
  • Harley YAR YAR YAR!
Re: county line mckenna
« Reply #3 on: January 12, 2016, 10:10:39 AM »
The old owner had a few guys work there that were a little shakey in my opinion. However he was a great guy. These new guys seem OK to me.
I have two glocks I am going to get 3.5 disconnectors put in, The new owner advised me to bring them in at the same time, that way he could charge me one $20 fee for both guns instead of two minimum fees, and he can do it right in front of me at the counter.

Carl
When the chips are down..... the buffalo is empty!!

I do not shop at Amazon

duckmen1

  • Guest
Re: county line mckenna
« Reply #4 on: January 12, 2016, 10:20:26 AM »
I'm not sure if the guy I delt with was the owner or just an employee. But he was the same guy every time I went in. And he had told me he didn't deal much with muzzle loaders. Like I said it was well probably 5 years back and never went back. Maybe I'll have to check the place out in the future if it went to new guys.

Offline lamrith

  • Business Sponsor
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Apr 2014
  • Posts: 2161
  • Location: Tacoma, WA
    • https://www.facebook.com/pelletpeddler/
    • Pellet Peddler LLC
Re: county line mckenna
« Reply #5 on: January 12, 2016, 10:32:05 AM »
The old owner passed away a month or two ago I believe, I think he stayed on as the Gunsmith until that time.  I am not sure what they are doing currently for gunsmithing, but they are good guys looking to improve the shop.

Offline XAFSSGT

  • The Nice Guy from HR
  • Past Sponsor
  • Trade Count: (0)
  • Scout
  • *****
  • Join Date: Aug 2015
  • Posts: 299
  • Location: Graham, WA
  • Wannabe Bowhunter with an MBA
Re: county line mckenna
« Reply #6 on: January 12, 2016, 10:33:58 AM »
The old owner had a few guys work there that were a little shakey in my opinion. However he was a great guy. These new guys seem OK to me.
I have two glocks I am going to get 3.5 disconnectors put in, The new owner advised me to bring them in at the same time, that way he could charge me one $20 fee for both guns instead of two minimum fees, and he can do it right in front of me at the counter.

Carl

Buy me a six pack of Elysian Men's Room, and I'll do them on my kitchen table in about ten minutes.

 :chuckle:
-Darrell

“We need the iron qualities that go with true manhood. We need the positive virtues of resolution, of courage, of indomitable will, of power to do without shirking the rough work which must always be done.” ~Theodore Roosevelt

 


* Advertisement

* Recent Topics

The Rack by Pathfinder101
[Today at 08:28:00 AM]


WA Bucket List….Mule Deer Permit by ShaneTyTrey
[Today at 08:25:40 AM]


F150 Tire/Wheel Guys by pickardjw
[Today at 08:25:37 AM]


Curvy Damascus Utility Fighter by Machias
[Today at 08:24:28 AM]


2027 Pink Run Destroyed by Fishmaker57
[Today at 07:54:58 AM]


Hey, Seahawks fans! by ganghis
[Yesterday at 10:01:44 PM]


Question about Hancock Timber Co Eastside by hunter399
[Yesterday at 09:37:59 PM]


My Entiat Late tag thread by jrebel
[Yesterday at 05:06:49 PM]


2025 deer, let's see em! by Kingofthemountain83
[Yesterday at 04:24:59 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal