collapse

Advertisement


Author Topic: Happy one day early birthday to me  (Read 5325 times)

Offline Russ McDonald

  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Oct 2011
  • Posts: 8197
  • Location: Enumclaw
  • USN ET3 SW 87-92, USS Excel MSO 439
  • Groups: NWTF, NRA
Re: Happy one day early birthday to me
« Reply #15 on: December 15, 2016, 05:45:50 AM »
Happy birthday! A GP100 in 4" is one of my more recent acquisitions and its my primary carry gun.

It will take you 20 minutes and $5 to swap out the main spring for a Wolff and polish the hammer strut and the gun will get lot more fun to shoot.  :tup:
Does that change the trigger pull weight or just smoother?  I changed out the hammer and trigger on my AR so I am feeling confident in changing simple things  :dunno:  :chuckle:
Russell McDonald
President South Sound NWTF Chapter

Offline Russ McDonald

  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Oct 2011
  • Posts: 8197
  • Location: Enumclaw
  • USN ET3 SW 87-92, USS Excel MSO 439
  • Groups: NWTF, NRA
Re: Happy one day early birthday to me
« Reply #16 on: December 15, 2016, 05:47:41 AM »
Thanks all for the birth day wishes.   :tup: I always think of the forum as my extended family.
« Last Edit: December 15, 2016, 08:20:37 AM by Russ McDonald »
Russell McDonald
President South Sound NWTF Chapter

Offline jackelope

  • Administrator
  • Trade Count: (+29)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50321
  • Location: Duvall, WA
  • Groups: jackelope
Re: Happy one day early birthday to me
« Reply #17 on: December 15, 2016, 08:15:37 AM »
Happy belated birthday, Russ. Sounds like you had a few good days of celebrating.
:fire.:

" In today's instant gratification society, more and more pressure revolves around success and the measurement of one's prowess as a hunter by inches on a score chart or field photos produced on social media. Don't fall into the trap. Hunting is-and always will be- about the hunt, the adventure, the views, and time spent with close friends and family. " Ryan Hatfield

My posts, opinions and statements do not represent those of this forum

Offline Bean Counter

  • Site Sponsor
  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Jul 2008
  • Posts: 13624
Re: Happy one day early birthday to me
« Reply #18 on: December 15, 2016, 08:19:23 AM »
Happy birthday! A GP100 in 4" is one of my more recent acquisitions and its my primary carry gun.

It will take you 20 minutes and $5 to swap out the main spring for a Wolff and polish the hammer strut and the gun will get lot more fun to shoot.  :tup:
Does that change the trigger pull weight or just smoother?  I changed out the hammer and trigger on my AR so I am feeling confident in changing simple things  :dunno:  :chuckle:

The new main spring by Wolff makes the trigger pull lighter. I believe its 12 or 14lbs and I put in a 9 or 10lb (don't remember). Go with the 10lb. Polishing the hammer strut makes the trigger pull smoother. Ruger revolvers, specially the double action type, have a more pronounced "clunk" to them than  a S&W when the cylinder locks up. If you bought it new and not used, load up some snap caps and click off about 300-400 dry fires and it will also help smooth up everything.

If you can change the trigger in a sport utility rifle you can do this in a GP100. I just threw in the  lighter hammer spring and DID NOT mess with the trigger return spring. That's a little more work and some say its not a good idea.

The process was easy enough for me and my spastic fingers. There are myriad videos on YouTube walking you through. The most challenging aspect is simply to keep the hammer strut pointed in the same direction when you reinsert it. Look at the photo below. The side of the tip of the strut that the spring is on is more rounded than the other side. Keep that side pointed towards the muzzle. pay attention to it when you pull it out. I'm pretty sure it will only go back in one way. Simply slip off the spring over the top of the strut and plop the new one down in its place after you polish off the edges of the tip a little bit.

https://www.gunsprings.com/RUGER/GP-100/cID3/mID52/dID233

One will cost you $4.29 and three will cost you $8.99. I also have a  couple of delicious 3" SP101's as CCW for wife and a safe queen and since the GP100 & SP101 use the same hammer spring I bought a three pack.

Take it to the range afterward and pop off a box of rounds before taking it on an important hunt to make sure everything was done right.  :twocents:

HTH
« Last Edit: December 15, 2016, 08:24:55 AM by Bean Counter »

 


* Advertisement

* Recent Topics

Son drawn - Silver Dollar Youth Any Elk - Help? by Gentrys
[Today at 09:23:31 PM]


Accura MR-X 45 load development by Karl Blanchard
[Today at 08:50:29 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by WoolyRunner
[Today at 07:36:44 PM]


Nevada bull hunt 2025 by Karl Blanchard
[Today at 03:20:09 PM]


I'm Going To Need Karl To Come up With That 290 Muley Sunscreen Bug Spray Combo by highside74
[Today at 01:27:51 PM]


Toutle Quality Bull - Rifle by lonedave
[Today at 12:58:20 PM]


49 Degrees North Early Bull Moose by washingtonmuley
[Today at 12:00:55 PM]


MA 6 EAST fishing report? by washingtonmuley
[Today at 11:56:01 AM]


Kings by Gentrys
[Today at 11:05:40 AM]


2025 Crab! by ghosthunter
[Today at 09:43:49 AM]


Survey in ? by hdshot
[Today at 09:20:27 AM]


Bear behavior by brew
[Today at 08:40:20 AM]


Bearpaw Outfitters Annual July 4th Hunt Sale by bearpaw
[Today at 07:57:12 AM]


A lonely Job... by Loup Loup
[Today at 07:47:41 AM]


2025 Montana alternate list by bear
[Today at 06:06:48 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal