collapse

Advertisement


Author Topic: First Shoot of 2017 and a New Rifle  (Read 2066 times)

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
First Shoot of 2017 and a New Rifle
« on: January 20, 2017, 04:06:32 PM »
Sorry for the length of this....

This was the first decent day of 2017 to be able to get to the farm and do some shooting.  I even have a new-to-me rifle that I really wanted to shoot.  I needed to find out if it would really shoot.

A friend of mine located a used Knight Super DISC (1-20 twist) in a location near him at a really decent price.  He asked me about it and I was really interested if he did not want it for himself.  He drove up and took a look it and brought it home - packed it up in a gold club box and sent out to the west.

The first pictures that I saw that he took - I have to say I was some what disappointed when I saw his pic of the breech plug.  I was almost positive the bore was going to be pitted but I really wanted to inspect it myself.  Pitting in the bore is not necessarily the death penalty of the rifle.  The rifle could still shoot very well.  It is just that a pitted bore can take more effort to clean up after shooting.  Thank gosh! I am not shooting real BP or any of the Pyros.

When I received the rifle the first thing I did was inspect it top to bottom.  The breech area and breech floor were in very good condition.  When I first looked at the bore I was disappointed!  From the outside condition of the rifle you could tell the rifle was well used  - now it would have been really nice if it had been well taken care of! 

When I first looked at the barrel I was really worried!



After seeing this my next decision was to see if I could clean up the bore.  200 strokes of JB's bare paste did make things look at lot better and feel a whole lot smoother.  The bore was still pitted but it was definitely not as bad as I have seen and I was sure the rifle would shoot...  After cleaning up the bore my next project was to remove the sights from the barrel - which then showed me I had another problem and along with a couple of minor scratches or marks on the surface of the barrel I broke out a tube "Flitz" and a polishing rag and polished the entire barreled action on the outside. It really did cleanup well.

Next - remove the 'C' tool bolt and replace with a Lehigh/Knight FPJ bolt, tool less hammer assembly and a Original Lehigh primer adapter and 17-4 breech plug.  I wanted to shoot Remington 209-4 primers so I ended up shimming the primer pocket to 0.170 to get the headspace I wanted.  Next off came the standard Knight trigger and I installed a Knight 3 screw Target trigger.  These triggers have a wider trigger show which I really enjoy.

Removed the Original DISC stock and added a DISC Walnut wood stock reducing the total weight of the rifle.



I may even swap this stock out for a thumbhole composite stock... time will tell

Today, I took the finish product to the farm to get some shooting and testing...

I set up a target at 25 yards. The rifle had been quickly bore sighted at the house.  I was terribly unimpressed with the first three shots.  Not only that after shooting I could see the possible problem right in the crown of the bore.  The pitting showed very well with the powder residue putting it forward to the eye.  The small pitting in the grooves and even up into the crown would/could really hurt accuracy.



I used this to explain the wide open group a 25 yards and the next couple of groups.

I then decided what the heck and continue to shoot. I adjusted the scope a couple of times then out of no-where I shot that last three shot group.



With that group I had turned the corner and gained a greater respect for this renegade rifle.  It just might work after all.

Here are some random picture of the shooting event



Next just as a quick test I placed three clay pigeons out in the snow.  First single bird was set a 60 yards and the second two at 70



 
Keep shooting muzzleloaders - They are a blast!!

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Re: First Shoot of 2017 and a New Rifle
« Reply #1 on: January 21, 2017, 09:02:56 AM »
Spent some time this morning turning in a new crown on the barrel.





I do not want to get to carried away until I verify that the rifle will not be accurate.

I will get out early next week to re-shoot the rifle at longer ranges.

Keep shooting muzzleloaders - They are a blast!!

Offline Mark251

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Jun 2015
  • Posts: 2608
  • Location: Spokane
Re: First Shoot of 2017 and a New Rifle
« Reply #2 on: January 21, 2017, 02:45:53 PM »
Nice post...good luck with the new rifle  :tup:

Offline Dan-o

  • Global Moderator
  • Trade Count: (+30)
  • Explorer
  • *****
  • Join Date: Jul 2010
  • Posts: 18104
Re: First Shoot of 2017 and a New Rifle
« Reply #3 on: January 21, 2017, 04:17:52 PM »
Nice.

I bet it shoots way better with that new crown.
Member:   Yakstrakgutp (or whatever we are)
I love the BFRO!!!
I wonder how many people will touch their nose to their screen trying to read this...

 


* Advertisement

* Recent Topics

50 inch SXS and Tracks? by bearpaw
[Today at 12:53:11 AM]


HUNTNNW 2025 trail cam thread and photos by huntnnw
[Yesterday at 11:09:53 PM]


Pocket Carry by Westside88
[Yesterday at 09:33:35 PM]


2025 Coyotes by JakeLand
[Yesterday at 07:15:03 PM]


Toutle Quality Bull - Rifle by Yeti419
[Yesterday at 06:11:55 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by bearpaw
[Yesterday at 06:11:45 PM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by scottfrick
[Yesterday at 02:14:23 PM]


Calling Bears by bearmanric
[Yesterday at 02:07:32 PM]


2025 Crab! by Stein
[Yesterday at 01:48:55 PM]


Sauk Unit Youth Elk Tips by Kales15
[Yesterday at 01:04:52 PM]


Price on brass? by Magnum_Willys
[Yesterday at 12:18:54 PM]


Utah cow elk hunt by kselkhunter
[Yesterday at 09:03:55 AM]


KODIAK06 2025 trail cam and personal pics thread by kodiak06
[Yesterday at 07:03:46 AM]


Unknown Suppressors - Whisper Pickle by Sneaky
[Yesterday at 04:09:53 AM]


Early Huckleberry Bull Moose tag drawn! by HillHound
[July 05, 2025, 11:25:17 PM]


THE ULTIMATE QUAD!!!! by Deer slayer
[July 05, 2025, 10:33:55 PM]


Archery elk gear, 2025. by WapitiTalk1
[July 05, 2025, 09:41:28 PM]


Oregon spring bear by kodiak06
[July 05, 2025, 04:40:38 PM]


Tree stand for Western Washingtn by kodiak06
[July 05, 2025, 04:37:01 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal