collapse

Advertisement


Author Topic: 7mm rem mag 162 grain hornady eldx recipe  (Read 4629 times)

Offline elkh8me

  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Apr 2011
  • Posts: 570
7mm rem mag 162 grain hornady eldx recipe
« on: June 04, 2017, 11:47:34 AM »
I am looking for anyone that has a load worked up for the hornady eldx in 7mm rem mag 162 grain that is willing to share info.  I am shooting it out of a kimber mountain ascent.
Pm would be much appreciated

Offline crabcreekhunter

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Aug 2007
  • Posts: 830
  • Location: Wenatchee
Re: 7mm rem mag 162 grain hornady eldx recipe
« Reply #1 on: June 04, 2017, 02:09:17 PM »
Running them right off the lands,h4831sc, with a .280 AI which is pretty comparable but cant help ya with a starting point besides that.  Seem to be pretty easy to load for.
"Courage is simply fear that has said its prayers"

Offline Behervejr

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Jun 2017
  • Posts: 2
  • Location: Austin tx
Re: 7mm rem mag 162 grain hornady eldx recipe
« Reply #2 on: June 26, 2017, 04:40:11 AM »
I recently worked up a ladder with the 162gr eldx, reloader 22 powder and hornady brass.  I'm shooting a muzzle broken cz550 7mm Rem Mag with a 23.8" barrel.  My best results came at the high end of the charge table.  The gun started to dial in under 3/4" at 100 yds with 62.5 gr of powder and got a little better at 62.9 gr, which is the high end of the published data. Speeds were recorded at 2892 for both charges, which I am not exactly sure why speeds didn't increase more going from 62.5 to 62.9.  My only guess is that I am hitting a node, at that point, which may suggest that it is a sweet spot for me.  My COL was at .02 off the lands.  Did a similar ladder at .05 off lands with worse accuracy.

Planning on doing another ladder, staying closer to 62.9gr and continuing to play with seating depth.  I am hesitant to go over the max charge, as I had one primer flatten a little bit.

Also, note your barrel twist rate, as the 162gr eldx is suggested for 9.5 twist and the 175gr eldx is suggested for 8.5 and faster twist.

***i was almost at the point of scrapping the gun as I had been through almost all of the factory rounds that were readily available for it and could not get it to shoot under 2" at 100yds, with lots of random flyers.  162 gr eldx and reloader 22 saved me.  Almost Immediatly after getting off of the bench, I had the pleaser of shooting an auddad sheep at 265yds with some heavy winds across a canyon.  The math worked perfectly as I simply adjusted my scope based on the ballistics chart and dropped the animal.  This round also cut through wind like a champ as I did not adjust for windage.  The .630 ballistic coefficient is pretty sweet.

Good luck.


Sent from my iPad using Tapatalk

 


* Advertisement

* Recent Topics

2025 Crab! by trophyhunt
[Today at 06:52:44 AM]


2025 Montana alternate list by bear
[Today at 06:06:48 AM]


Accura MR-X 45 load development by kyles_88
[Today at 05:27:26 AM]


A lonely Job... by JDArms1240
[Today at 12:59:00 AM]


49 Degrees North Early Bull Moose by westdcw
[Yesterday at 11:11:57 PM]


Son drawn - Silver Dollar Youth Any Elk - Help? by Boss .300 winmag
[Yesterday at 09:42:07 PM]


Bear behavior by Boss .300 winmag
[Yesterday at 09:36:32 PM]


Toutle Quality Bull - Rifle by HntnFsh
[Yesterday at 08:09:14 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by bearpaw
[Yesterday at 06:30:54 PM]


MA-10 Coho by WAcoueshunter
[Yesterday at 02:08:31 PM]


KODIAK06 2025 trail cam and personal pics thread by kodiak06
[Yesterday at 01:52:01 PM]


Blue Mtn Foothills West Rifle Tag by Trooper
[Yesterday at 01:18:40 PM]


GROUSE 2025...the Season is looming! by Dave Workman
[Yesterday at 01:01:22 PM]


50 inch SXS and Tracks? by jrebel
[Yesterday at 11:20:33 AM]


Sockeye Numbers by Southpole
[Yesterday at 11:12:46 AM]


3 pintails by metlhead
[Yesterday at 11:07:43 AM]


Modified game cart... 🛒 by Dan-o
[Yesterday at 08:44:37 AM]


Velvet by Brute
[Yesterday at 08:37:08 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal