Remington 870 Express Magnum broke in half??

[ctwiggs1]

Just got done patterning my 870 for Fall Turkey and as I was putting it back in the hard case, the stock straight up fell away from the chamber.  It looks like the threads on the both sides are completely corroded and it's completely done.  I don't see a lot of space on the metal to rebore it- is the gun toast?  Anyone else had this happen?

[follow maggie]

Pictures would help, I think. I'm having a hard time seeing dwhat you're asking about in my brain.

[BigGoonTuna]

i'm guessing the stock bolt broke or the threads got so corroded that it stripped out?  have never heard of that happening before, but wouldn't seem impossible either.

[h2ofowlr]

Interesting.  Never seen this happen?  Did you use it as an oar in salt water?

[Timberstalker]

 
Did you use it as an oar in salt water?

 

It sounds like the stock bolt failed.  Should be an extremely easy fix.  Post some pictures.

[ctwiggs1]

pic 1

[ctwiggs1]

pic 2

[ctwiggs1]

I've got a work order with Remington now to get it looked at.  I have had a number of armchair gunsmiths give me advice but they aren't the ones who will be behind this thing when a 3.5" magnum turkey round is firing.  I'd rather have a Remington smith tell me if its salvageable or not.

I have hunted saltwater, but back when I did I would hose it off at home with freshwater, then break it down and clean it and dry it.  After that I would leave it with a slight coat of oil on all the inner workings.

[Bill W]

Warranty repair will be the fastest, the best and the cheapest route for you.

[ctwiggs1]

It's a 10 year old gun so I don't expect to get a lot of warranty help from Remington.  To be honest I just hope it's not completely toast. 

[Bill W]

Remington has a limited lifetime warranty that covers normal wear and tear.  While corrosion is probably excluded from the warranty I have never seen (or heard of) an issue like this.   Let us know what Customer Service says.   My one assumption is that you bought this new and it wasn't a used gun you bought.

[ctwiggs1]

Yup, bought new

[bobcat]

I have hunted saltwater, but back when I did I would hose it off at home with freshwater, then break it down and clean it and dry it.  After that I would leave it with a slight coat of oil on all the inner workings.

Did you also remove the stock when you did that and make sure it was cleaned, dried, and oiled inside there?


Sent from my iPhone using Tapatalk

[ctwiggs1]

I have hunted saltwater, but back when I did I would hose it off at home with freshwater, then break it down and clean it and dry it.  After that I would leave it with a slight coat of oil on all the inner workings.

Did you also remove the stock when you did that and make sure it was cleaned, dried, and oiled inside there?


Sent from my iPhone using Tapatalk

No, honestly I've never removed it.  To be completely honest I never really though moisture would get inside there.

[h2ofowlr]

I have hunted saltwater, but back when I did I would hose it off at home with freshwater, then break it down and clean it and dry it.  After that I would leave it with a slight coat of oil on all the inner workings.

Did you also remove the stock when you did that and make sure it was cleaned, dried, and oiled inside there?


Sent from my iPhone using Tapatalk

No, honestly I've never removed it.  To be completely honest I never really though moisture would get inside there.

Yes, moisture will get into that location. Had it happen on my Browning BPS and Benelli.  Hunting around salt, makes it even worse.  I use saltaway and rinse.

[ctwiggs1]

Well darn.

[bobcat]

When I used to hunt ducks a lot, I used to take the stock off my 870 and/or 1100 quite regularly, and there was often moisture in there, and sometimes light rust. I'd grease the bolt up pretty good and I'm sure that helped. I didn't tear it down like this after every hunt, but on the days when I was in a heavy rain all day, or especially those times when the gun went swimming I would. 

Hopefully Remington will get it all fixed up for you.

[Timberstalker]

Looks rough.  Thanks for sharing the pictures.  Let us know what you get from Remington.  Best of luck.

[CP]

but they aren't the ones who will be behind this thing when a 3.5" magnum turkey round is firing. 

That hurts my shoulder just thinking about it.