collapse

Advertisement


Author Topic: .357 Mag question  (Read 2894 times)

Offline C-Money

  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Sep 2008
  • Posts: 11024
  • Location: Grant County
  • Self proclaimed 3pt master
.357 Mag question
« on: March 05, 2009, 05:16:11 PM »
Anyone ever reload for the .357 mag. I want to reload for a pistol, and was wondering about if the case/bullet needs crimped to shoot threw a revolver?? Are the primers smaller in diameter than standard center fire primers, will I need a different primer set up on my RCBS rockchuckar?? Anyone ever hunt deer with the .357?? Thanks for the input!
I felt like a one legged cat trying to bury a terd on a frozen pond!

Offline CP

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Mar 2008
  • Posts: 7247
  • Location: Mukilteo
Re: .357 Mag question
« Reply #1 on: March 05, 2009, 07:58:38 PM »
I load 158g Hornady XTP bullets with a near max dose of Ramshot Enforcer and a CCI 550 primer.  I find that if I don’t use magnum small pistol primers the powder doesn’t fully burn. 

You do need to crimp them to make sure that the rounds don’t stick in the cambers and that the 5 other bullets don’t dislodge from the recoil when the revolver is fired. 

This round will effectively kill deer-sized game at short yardage.

I don’t use an RCBS press so I can’t answer that ? 

Offline C-Money

  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Sep 2008
  • Posts: 11024
  • Location: Grant County
  • Self proclaimed 3pt master
Re: .357 Mag question
« Reply #2 on: March 05, 2009, 08:16:44 PM »
Thank you for the info. I need to look into crimping, as I know nothing about it. I guess I need a new tool??
I felt like a one legged cat trying to bury a terd on a frozen pond!

Offline MHWASH

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Jun 2007
  • Posts: 1193
  • Location: Colfax
Re: .357 Mag question
« Reply #3 on: March 05, 2009, 08:18:20 PM »
You don't have to change out the primer seat but it helps. The seat is easy to change. If you don't have one I'm sure RCBS will send you one.

 Crimping the bullets is not a difficult operation either. Once you get the die set it's just like seating without a crimp.

Offline C-Money

  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Sep 2008
  • Posts: 11024
  • Location: Grant County
  • Self proclaimed 3pt master
Re: .357 Mag question
« Reply #4 on: March 05, 2009, 08:20:39 PM »
So the die set I will buy places the cripm?? Dose it do this as I press in the bullet??
I felt like a one legged cat trying to bury a terd on a frozen pond!

Offline MHWASH

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Jun 2007
  • Posts: 1193
  • Location: Colfax
Re: .357 Mag question
« Reply #5 on: March 05, 2009, 08:28:40 PM »
Yes, yes. Basically once you have the bullet seated to the desired depth, you then screw the die in a little further to set the crimp. You seat and crimp in the same stroke of the handle.

Offline C-Money

  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Sep 2008
  • Posts: 11024
  • Location: Grant County
  • Self proclaimed 3pt master
Re: .357 Mag question
« Reply #6 on: March 05, 2009, 08:29:56 PM »
Thank you for your help!!!
I felt like a one legged cat trying to bury a terd on a frozen pond!

Offline PolarBear

  • Site Sponsor
  • Trade Count: (+4)
  • Explorer
  • ******
  • Join Date: Mar 2007
  • Posts: 10468
  • Location: Tatooine
Re: .357 Mag question
« Reply #7 on: March 05, 2009, 08:30:35 PM »
Is the .357 mag legal for deer in this state?  If so I might have a new goal in mind for my Python.

Offline C-Money

  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Sep 2008
  • Posts: 11024
  • Location: Grant County
  • Self proclaimed 3pt master
Re: .357 Mag question
« Reply #8 on: March 05, 2009, 08:36:16 PM »
I think WDFW passed a law a few years ago allowing a wide range of centerfire pistols "legal" to hunt with. They did this so hunters could carry a side arm and not get in trouble??? Dose this sound right??
I felt like a one legged cat trying to bury a terd on a frozen pond!

Offline bobcat

  • Global Moderator
  • Trade Count: (+14)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 39215
  • Location: Rochester
    • robert68
Re: .357 Mag question
« Reply #9 on: March 05, 2009, 08:40:18 PM »
That's right but the only reason they did it was to simplify the regulations. At least that's the way I understood it. I think just about any handgun cartridge other than the 22 rimfire is now legal for deer, and probably all big game, in this state. It's up to the individual to use common sense, rather than having their choice dictated by law. Which is as it should be in my opinion. A 357 magnum is more than enough for deer, but if it were me I'd limit my shots to about 35 yards.

Offline PolarBear

  • Site Sponsor
  • Trade Count: (+4)
  • Explorer
  • ******
  • Join Date: Mar 2007
  • Posts: 10468
  • Location: Tatooine
Re: .357 Mag question
« Reply #10 on: March 05, 2009, 08:48:11 PM »
I just might hunt modern for a change and give the bow a rest.  I can still "bowhunt" with my .357!  I get within 30 yards with my bow, why not with the old python?  I shot competition with the old girl years ago but never thought about taking her into the woods after "soft" targets.

Offline Kain

  • Scalpless
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Sep 2008
  • Posts: 5859
  • Location: Vantucky, WA
  • VantuckyKain
Re: .357 Mag question
« Reply #11 on: March 06, 2009, 10:12:42 AM »
Handguns: Big game, except cougar, may
be hunted with handguns with a minimum
barrel length of 4 inches per manufacturers
specification, and fire a minimum 24 caliber
centerfire cartridge. Cougar may be hunted
with 22 caliber centerfire handgun. Rimfire
handguns are not legal for big game.

From the regs

http://wdfw.wa.gov/wlm/game/hunter/huntregs2008.pdf

 


* Advertisement

* Recent Topics

Wildlife Obsession Duvall WA Taxidermy Closing its doors by storyteller
[Yesterday at 11:48:31 PM]


Smelt ? by Jake Dogfish
[Yesterday at 10:59:35 PM]


MOA or MRAD, & Why? by addicted1
[Yesterday at 10:45:34 PM]


West side antler buyers by addicted1
[Yesterday at 10:19:05 PM]


Is it a conflict of interest by bbarnes
[Yesterday at 08:54:11 PM]


Shotgun Sight help by hughjorgan
[Yesterday at 08:38:11 PM]


Found after 2 days, meat worth anything? by Sandberm
[Yesterday at 07:58:12 PM]


Crazy looking Deer by NOCK NOCK
[Yesterday at 07:35:14 PM]


6x51R by JDHasty
[Yesterday at 07:22:48 PM]


GO 2025 15th Annual Hunting-Washington Christmas Gift Exchange by swordtine
[Yesterday at 07:20:45 PM]


"Any Deer" GMU's - Proof of Sex? by 10thmountainarcher
[Yesterday at 07:16:08 PM]


Reinforcing stock for bipod by 7mmfan
[Yesterday at 03:36:10 PM]


Seekins SALE by BigJs Outdoor Store
[Yesterday at 01:42:40 PM]


Big J's Barn sale / Drawing by BigJs Outdoor Store
[Yesterday at 01:37:21 PM]


Smith-Reynolds American Legion Post #14 Fall Raffle by pianoman9701
[Yesterday at 09:18:38 AM]


Idaho on the verge of outlawing by bearpaw
[Yesterday at 08:37:03 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal