collapse

Advertisement


Author Topic: 300 BLK for Coyote  (Read 4896 times)

Offline Evil_EdwardO

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2012
  • Posts: 1100
  • Location: Albion, WA
  • Groups: NRA, LPC, ASF, GOA, RLRR
300 BLK for Coyote
« on: March 26, 2018, 07:50:09 AM »
Was curious if anyone here uses/tried 300BLK for coyote. Was looking at reloading with Hornady 110g VMax. How bad is the fur damage?

I watched a few of videos on YouTube and only a couple commented on fur damage saying they had no exit wounds.

Offline headshot5

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Mar 2008
  • Posts: 1396
  • Location: Port Orchard, WA
Re: 300 BLK for Coyote
« Reply #1 on: March 26, 2018, 08:30:00 AM »
For coyotes you are better off with a .223 or .204 (my opinion).  I've killed 6 or 7 with my blackout using 125gr Nosler ballistic tips.  They leave a pretty good hole.  I'm not sure how a 110 V-max will work but I bet if you hit bone it could be messy. 

 

Offline hunter399

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2014
  • Posts: 8740
  • Location: In Your Hunting Spot
  • Groups: NRA RMEF
Re: 300 BLK for Coyote
« Reply #2 on: March 26, 2018, 09:58:27 AM »
If it gets it done ,use it.don't see any problem.

Offline Jonathan_S

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Oct 2012
  • Posts: 8997
  • Location: Medical Lake
  • Volleyfire Brigade, Cryder apologist
Re: 300 BLK for Coyote
« Reply #3 on: March 27, 2018, 06:11:18 AM »
For an AR platform cartridge for coyotes, I'd look elsewhere.  Unless most of your shooting is in more confined distances, it would just seem that the smaller bores would better serve you.  That said, I think that bullet selection is a bigtime factor in fur damage.  BTs and VMax are a bit on the sloppy side

If just wanting something new and different it would be a fun one to tinker with though  :tup:  and they make Lapua brass for it  :yike:

Kindly do not attempt to cloud the issue with too many facts.

Offline Evil_EdwardO

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Oct 2012
  • Posts: 1100
  • Location: Albion, WA
  • Groups: NRA, LPC, ASF, GOA, RLRR
Re: 300 BLK for Coyote
« Reply #4 on: March 27, 2018, 07:41:15 AM »
For an AR platform cartridge for coyotes, I'd look elsewhere.  Unless most of your shooting is in more confined distances, it would just seem that the smaller bores would better serve you.  That said, I think that bullet selection is a bigtime factor in fur damage.  BTs and VMax are a bit on the sloppy side

If just wanting something new and different it would be a fun one to tinker with though  :tup:  and they make Lapua brass for it  :yike:

Yeah, I'm having an AR built and was looking at loads. So , yep I'm just tinkering with it. New toy and looking for ways to have fun with it. I usually use my .243 for coyotes.

Offline trophyhunt

  • Forum Sponsor
  • Trade Count: (+11)
  • Explorer
  • *****
  • Join Date: Nov 2008
  • Posts: 19635
  • Location: Wetside
  • Groups: Wa Wild Sheep Life Member
Re: 300 BLK for Coyote
« Reply #5 on: March 27, 2018, 07:46:43 AM »
I just shot one in the neck the other day w my .300 win, left a big hole !  😬
“In common with”..... not so much!!

Offline Jonathan_S

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Oct 2012
  • Posts: 8997
  • Location: Medical Lake
  • Volleyfire Brigade, Cryder apologist
Re: 300 BLK for Coyote
« Reply #6 on: March 27, 2018, 07:48:22 AM »
Yep don't get me wrong.  If I had a 300 BLK, I would mag dump on a coyote whenever possible.
Kindly do not attempt to cloud the issue with too many facts.

Offline yotehunt

  • Trade Count: (+10)
  • Tracker
  • **
  • Join Date: Nov 2017
  • Posts: 45
Re: 300 BLK for Coyote
« Reply #7 on: June 18, 2018, 10:36:24 PM »
Will be using my SBR 556 and ruger 300 American. Will use the 110vmax as well, not worried about the furs/

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31528
  • Location: Goldendale,WA
Re: 300 BLK for Coyote
« Reply #8 on: June 18, 2018, 10:44:28 PM »
I have shot a couple with 125 nosler b tips. They are not moving to fast but the b tips don’t require much FPS to do a lot of damage. Really depends on where they get hit.
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline BlackRiverTaxidermy

  • Business Sponsor
  • Trade Count: (0)
  • Scout
  • *****
  • Join Date: Jul 2015
  • Posts: 430
  • Location: Rochester, WA
  • Joel - Owner/Taxidermist
    • BlackRiver Taxidermy
    • BlackRiver Taxidermy
  • Groups: RMEF, DU, NRA, WSTA
Re: 300 BLK for Coyote
« Reply #9 on: June 19, 2018, 07:10:29 AM »
I work and sell for a couple of fur dealers and during the winter months I bring in quite a few brush dogs for the tanning/fur market.  I get to see all sorts of holes and always ask, unless I already know the guys setup, what type of caliber and round they are shooting. I can tell you that I have seen guys shooting a small round such as a .22-250 make a HUGE hole in some and then on a flip side a large caliber like a 300 SWM make a tiny hole. Sure, the idea is use the smallest caliber possible, however I can say that the common denominator when it comes to a tiny hole was NOT the caliber size, but the round used. Guys with very small holes/very little damage were using a hard tipped bullet with the opposite of what is desired with deer such as a soft tip for good expansion. The hard or FMJ bullets  made very little damage. Im no ballistics expert but a small animal such as a coyote allows those bullets to just burn through the yote. There are always exceptions such as if major bone is hit like the spine or femur. If you have a comfortable gun you love and want to use it for some yotes then I woud really focus on the bullet type unless you just need an excuse to buy another gun...which is always a good idea anyway  :)
Just my opinion and  :twocents:... Joel/BlackRiver Taxidermy
« Last Edit: June 19, 2018, 08:29:57 AM by BlackRiverTaxidermy »
WWW.blackrivertaxidermy.com
360-789-5056- Joel Swecker-BRT

 


* Advertisement

* Recent Topics

Oregon spring bear by kodiak06
[Today at 04:40:38 PM]


Tree stand for Western Washingtn by kodiak06
[Today at 04:37:01 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by Dan-o
[Today at 03:46:34 PM]


Pocket Carry by BKMFR
[Today at 03:34:12 PM]


Utah cow elk hunt by kselkhunter
[Today at 02:54:14 PM]


A lonely Job... by Loup Loup
[Today at 01:15:11 PM]


Range finders & Angle Compensation by Fidelk
[Today at 11:58:48 AM]


Willapa Hills 1 Bear by hunter399
[Today at 10:55:29 AM]


Bearpaw Outfitters Annual July 4th Hunt Sale by bearpaw
[Today at 08:40:03 AM]


KODIAK06 2025 trail cam and personal pics thread by Boss .300 winmag
[Today at 07:53:52 AM]


Yard bucks by Boss .300 winmag
[Yesterday at 11:20:39 PM]


Yard babies by Feathernfurr
[Yesterday at 10:04:54 PM]


Seeking recommendations on a new scope by coachg
[Yesterday at 08:10:21 PM]


Sauk Unit Youth Elk Tips by high_hunter
[Yesterday at 08:06:05 PM]


Jupiter Mountain Rayonier Permit- 621 Bull Tag by HntnFsh
[Yesterday at 07:58:22 PM]


MOVED: Seekins Element 7PRC for sale by Bob33
[Yesterday at 06:57:10 PM]


3 pintails by metlhead
[Yesterday at 04:44:03 PM]


1993 Merc issues getting up on plane by Happy Gilmore
[Yesterday at 04:37:55 PM]


Unit 364 Archery Tag by buglebuster
[Yesterday at 12:16:59 PM]


In the background by zwickeyman
[Yesterday at 12:10:13 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal