Archers advantage- need help

[Vo2max]

For my arrow length using archers advantage, do I use the length of the carbon shaft or the length of the arrow from tip to nock notch?

Thanks in advance.

Erik

[shallowforks]

pretty sure its shaft only

[northwesthunter84]

Throat of the nock to the end of carbon, don’t include the outsert if used and leave the point off too. I’ve been messing with it for my fast Eddie sight so let me know if you have any ?s

[shallowforks]

Double checked, it says right in the help section to measure bare shaft only no part of nock or insert. (This is for plugging numbers into archers advantage only. When purchasing shafts or talking about arrow length with arrow manufacturers you would measure from valley of nock to end of shaft.

[Vo2max]

Man, I feel like an idiot... I should have seen that! So sorry to ask when it says it clearly in the help section

Erik

[Vo2max]

Now I can’t seem to get the spine meter to be dead center as I have in the last with the same arrow, weight, bow etc. I think I’ll have to monkey around some more!

[shallowforks]

Yea i always play around with tve arrow length to get the perfect spine
1/16” at a time