collapse

Advertisement


Author Topic: Adjusting sights on xds  (Read 1241 times)

Offline huntnfmly

  • Trade Count: (+36)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4734
Adjusting sights on xds
« on: August 16, 2018, 09:55:37 AM »
Curious I have a xds with the factory sights and was wondering is there a tool to push the sights to adjust? or what have you used that wrks?
Thanks in advance
Jim
I'm your dam tour guide Arnie please don’t wonder off the dam tour.
Take as many dam pictures as you want ....
Are there any dam questions ..

Offline Alchase

  • Trade Count: (0)
  • Legend
  • ******
  • Join Date: Apr 2007
  • Posts: 20511
  • Location: Tinker AFB, OK
Re: Adjusting sights on xds
« Reply #1 on: August 16, 2018, 04:08:38 PM »
XDS is not designed to be adjusted, but that does not mean yours was centered correctly from the factory.
Is it shooting consistently?
Where does it hit on the target?
Does it shoot the same for every shooter?

Attached is a generic correction chart, if it shoots fine or differently for someone else.

If it shoots the same for other shooters as well, check the alignment lines on the front sight and slide, if they are not aligned, you can tap the front sight to line it up but it take some effort.
If they are already aligned send it back to Springfield.
 
Only 2 defining forces sacrificed themselves for you:
The American Soldier and Jesus Christ. One died for your freedom, the other for your soul.

My rock,
He trains my hands for war and my fingers for battle.
Psalm 144.1

Offline huntnfmly

  • Trade Count: (+36)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4734
Re: Adjusting sights on xds
« Reply #2 on: August 16, 2018, 04:55:46 PM »
Thanks for that @Alchase I'll do some more shooting it probably is me.
Yes it is pretty consistent a little high and right.
I've only had it out once and was only able to shoot a couple magazines
I'm your dam tour guide Arnie please don’t wonder off the dam tour.
Take as many dam pictures as you want ....
Are there any dam questions ..

Offline Alchase

  • Trade Count: (0)
  • Legend
  • ******
  • Join Date: Apr 2007
  • Posts: 20511
  • Location: Tinker AFB, OK
Re: Adjusting sights on xds
« Reply #3 on: August 16, 2018, 06:53:02 PM »
I have found the first step to diagnose pistol issues, is have someone else shoot it and see if the same thing happens to them.
Nine times out of 10 it is some bad habit I have picked up. Grip deviation, trigger finger, yes even "limp wristing"  :chuckle:
Sometimes just having another "knowledgeable" shooter watch you shoot can diagnose issues as well.

A few years ago, I was shooting my XD, 40 cal. I had already out hundreds of rounds through it with very consistent hits.
All of a sudden, this trip, I was hitting low left, with great groups, but still a couple inches low and an inch left.
I was getting pretty mad! I had my buddy shoot it, and he sprayed all over, consistently, like his usual,  :dunno:.

I convinced myself I need a new Powder River Trigger "great trigger!" installed the new trigger, went to the range. The new trigger has an awesome crisp break and a much better reset.
My groups were substantially tighter, beautiful groups, two inches low and an inch left,   :bash:

I had a buddy who still shoots competitively, watch me shoot. After just a couple shots, he says " you are slapping that pretty new trigger, like it was a red headed step child"   :yike:

Once corrected, I was back to hitting center with good groups.
Only 2 defining forces sacrificed themselves for you:
The American Soldier and Jesus Christ. One died for your freedom, the other for your soul.

My rock,
He trains my hands for war and my fingers for battle.
Psalm 144.1

 


* Advertisement

* Recent Topics

GO 2025 15th Annual Hunting-Washington Christmas Gift Exchange by bearhunter99
[Today at 11:38:40 AM]


My Entiat Late tag thread by jrebel
[Today at 11:37:11 AM]


WA Bucket List….Mule Deer Permit by OutHouse
[Today at 11:29:40 AM]


Idaho Trapping Journal 2025/26 by outdooraddict
[Today at 11:21:40 AM]


Question about Hancock Timber Co Eastside by MMCCAULEY
[Today at 10:31:50 AM]


Cell Cams for Westside Elk by kodiak06
[Today at 10:12:19 AM]


The Rack by Pathfinder101
[Today at 09:21:09 AM]


Smith-Reynolds American Legion Post #14 Fall Raffle by HntnFsh
[Today at 08:46:23 AM]


Idaho on the verge of outlawing by Machias
[Today at 07:51:44 AM]


HUNTNNW 2025 trail cam thread and photos by Machias
[Today at 07:50:38 AM]


Weatherby Long Range Steel Choke by Henrydog
[Today at 06:33:46 AM]


Colockum WMA chukar hunting by Kingofthemountain83
[Yesterday at 11:44:55 PM]


Early Huckleberry Bull Moose tag drawn! by Turner89
[Yesterday at 09:15:28 PM]


Selkirk bull moose. by Turner89
[Yesterday at 08:38:02 PM]


Cleaning glass by MADMAX
[Yesterday at 07:26:32 PM]


Lion Down - the Savor of Success by DonJuan
[Yesterday at 02:22:27 PM]


Darwin Outfitters by Kingofthemountain83
[Yesterday at 12:22:38 PM]


Degreasing A Deer Skull by eyesinfront
[Yesterday at 09:47:06 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal