collapse

Advertisement


Author Topic: Adjusting sights on xds  (Read 1155 times)

Offline huntnfmly

  • Trade Count: (+36)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4723
Adjusting sights on xds
« on: August 16, 2018, 09:55:37 AM »
Curious I have a xds with the factory sights and was wondering is there a tool to push the sights to adjust? or what have you used that wrks?
Thanks in advance
Jim
I'm your dam tour guide Arnie please don’t wonder off the dam tour.
Take as many dam pictures as you want ....
Are there any dam questions ..

Offline Alchase

  • Trade Count: (0)
  • Legend
  • ******
  • Join Date: Apr 2007
  • Posts: 20343
  • Location: Tinker AFB, OK
Re: Adjusting sights on xds
« Reply #1 on: August 16, 2018, 04:08:38 PM »
XDS is not designed to be adjusted, but that does not mean yours was centered correctly from the factory.
Is it shooting consistently?
Where does it hit on the target?
Does it shoot the same for every shooter?

Attached is a generic correction chart, if it shoots fine or differently for someone else.

If it shoots the same for other shooters as well, check the alignment lines on the front sight and slide, if they are not aligned, you can tap the front sight to line it up but it take some effort.
If they are already aligned send it back to Springfield.
 
Only 2 defining forces sacrificed themselves for you:
The American Soldier and Jesus Christ. One died for your freedom, the other for your soul.

My rock,
He trains my hands for war and my fingers for battle.
Psalm 144.1

Offline huntnfmly

  • Trade Count: (+36)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4723
Re: Adjusting sights on xds
« Reply #2 on: August 16, 2018, 04:55:46 PM »
Thanks for that @Alchase I'll do some more shooting it probably is me.
Yes it is pretty consistent a little high and right.
I've only had it out once and was only able to shoot a couple magazines
I'm your dam tour guide Arnie please don’t wonder off the dam tour.
Take as many dam pictures as you want ....
Are there any dam questions ..

Offline Alchase

  • Trade Count: (0)
  • Legend
  • ******
  • Join Date: Apr 2007
  • Posts: 20343
  • Location: Tinker AFB, OK
Re: Adjusting sights on xds
« Reply #3 on: August 16, 2018, 06:53:02 PM »
I have found the first step to diagnose pistol issues, is have someone else shoot it and see if the same thing happens to them.
Nine times out of 10 it is some bad habit I have picked up. Grip deviation, trigger finger, yes even "limp wristing"  :chuckle:
Sometimes just having another "knowledgeable" shooter watch you shoot can diagnose issues as well.

A few years ago, I was shooting my XD, 40 cal. I had already out hundreds of rounds through it with very consistent hits.
All of a sudden, this trip, I was hitting low left, with great groups, but still a couple inches low and an inch left.
I was getting pretty mad! I had my buddy shoot it, and he sprayed all over, consistently, like his usual,  :dunno:.

I convinced myself I need a new Powder River Trigger "great trigger!" installed the new trigger, went to the range. The new trigger has an awesome crisp break and a much better reset.
My groups were substantially tighter, beautiful groups, two inches low and an inch left,   :bash:

I had a buddy who still shoots competitively, watch me shoot. After just a couple shots, he says " you are slapping that pretty new trigger, like it was a red headed step child"   :yike:

Once corrected, I was back to hitting center with good groups.
Only 2 defining forces sacrificed themselves for you:
The American Soldier and Jesus Christ. One died for your freedom, the other for your soul.

My rock,
He trains my hands for war and my fingers for battle.
Psalm 144.1

 


* Advertisement

* Recent Topics

2025 Quality Chewuch Tag by huntnphool
[Today at 10:27:22 PM]


Need information on having a gunsmith thread a barrel for thin walled chokes. by elkslayer069
[Today at 09:51:42 PM]


erronulvin trail cam photos by actionshooter
[Today at 09:04:17 PM]


1st Quality Deer tag in Washington and its a muzzleloader tag by greenhead_killer
[Today at 08:32:48 PM]


Sportsman Alliance files petition to Gov Ferguson for removal of corrupt WA Wildlife Commissioners by ghosthunter
[Today at 07:44:01 PM]


2024 Quality Buck coming home by Kingofthemountain83
[Today at 07:17:01 PM]


2025 Washington Rocky Mountain Bighorn Sheep Raffle by GurrCentral
[Today at 06:50:57 PM]


KODIAK06 2025 trail cam and personal pics thread by Kingofthemountain83
[Today at 06:39:14 PM]


Blue Mtn Foothills West Rifle Tag by SEWA509
[Today at 06:18:20 PM]


Ten Years, and still plugging along by buglebuster
[Today at 05:27:01 PM]


Sockeye Numbers by Stein
[Today at 05:12:28 PM]


Colockum Archery Bull Tag by SkookumHntr
[Today at 04:15:27 PM]


Public Land Sale Senate Budget Reconciliation by Tbar
[Today at 03:47:14 PM]


Asking for Gift of Knowledge by Silversands
[Today at 02:48:58 PM]


What bull would you pick? by Gentrys
[Today at 11:34:17 AM]


NEED ADVICE: LATE after JUNE 15th IDAHO BEAR by hunter399
[Today at 11:29:38 AM]


Son drawn - Silver Dollar Youth Any Elk - Help? by Gentrys
[Today at 11:21:15 AM]


White River MF Bull Permit by TimbersEdge
[Today at 10:59:45 AM]


Observatory quality bull rifle by yakimanoob
[Today at 08:32:46 AM]


3 days for Kings by brocka
[Today at 08:29:39 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal