Author Topic: chrono graphing muzzleloader (Read 1535 times)

lhrbull · « **on:** May 19, 2019, 10:59:38 AM »

do you use the same technics as for modern rifle I have been told you have to increase the distance you set it up but can't find exact footage

Sabotloader · « **Reply #1 on:** May 19, 2019, 12:32:48 PM »

because of the size of the muzzle blast - I set mine at 10' from the muzzle.

This pic shows a typical set up for me.

MountainDevil54 · « **Reply #2 on:** May 19, 2019, 12:48:08 PM »

depending on the brand, the instructions normally tell you how far to put it for a muzzleloader. I set mine up 15 to 18 feet away for muzzleloader.

lhrbull · « **Reply #3 on:** May 19, 2019, 02:07:08 PM »

thanks guys old chronograph don't have instruction book any more

Sabotloader · « **Reply #4 on:** May 19, 2019, 02:42:37 PM »

I should have mentioned that I blast shield on mine... the plastic cover and wrap over the face of the chrono... It a small layer of protection for the actual chrono.

This thing

https://www.opticsplanet.com/competition-electronics-lexan-debris-shield.html

Hunting Washington Forum