Bare 209 conversion for knight disc extreme

[Sabotloader]

So, if I’m going to shim, where exactly does it go?  I’m a little confused

Follow this link

https://www.modernmuzzleloader.com/threads/shimming-the-209-primer-pocket-updated-4-7-16.28388/

[lazydrifter]

[motofrog]

That is good to know I have the fpj bolt because I just bought the gun thank you again

Shoot if you have the FPJ bolt you are in really good shape - go to Lehigh and pick up the 3 parts you need and you are into the 'bare primer' shooting theater.

Get a couple of the primer adapters.  One of the breech plugs and a couple of the vent liners.

Is this advice the same for an ultra-lite?

[Sabotloader]

That is good to know I have the fpj bolt because I just bought the gun thank you again

Shoot if you have the FPJ bolt you are in really good shape - go to Lehigh and pick up the 3 parts you need and you are into the 'bare primer' shooting theater.

Get a couple of the primer adapters.  One of the breech plugs and a couple of the vent liners.

Is this advice the same for an ultra-lite?

Yes the only difference is the breech plug.  The ULite BP is a little longer.

[motofrog]

Great info here. Another round of questions for you guys

In a disk extreme or ultra-lite is a 209 FPJ bolt with a western breech plug and #11 nipple Oregon/Idaho legal or would the cap be covered making it illegal? Also someone familiar with the knight rifles mentioned the 1:28 twist 50 cal barrel being geared more towards the 250gn 45 cal bullets in a sabot what does one use in the non sabot friendly states?