Barrel ?

[fliesitdies]

Just curious what do you use to clean out the copper.
Thanks in advance.
Fliesitdies

[jrebel]

Sweets is my go to.   I’m sure there are a lot of products now days that will work but that’s what has worked for me. 

[Magnum_Willys]

Most guys have moved to Boretech non-smell products.  Eliminator cleans carbon and copper. I prefer their C4 for carbon then just a lite use of their copper remover.  I like to leave some copper there but no carbon.  Google Boretech Eliminator. 

And throw out the nylon brushes just use brass.

[jasnt]

I like sweets too. If it’s really bad I use gunslicks bore foam but ya gotta be careful with it.  That stuff eats everything!

[BigGoonTuna]

I don’t know if I do it wrong or all of my guns are “foulers” but I seem to spend half the day pushing patches through unless I use something like kg-12. The only thing that’s come close in effectiveness is Montana extreme 50bmg copper solvent, but man, one whiff of that stuff and I’ll be smelling ammonia for days.

[mazama]

wipeout,put in leave it for a while,out comes thick blue snot.

[dmoua]

I get the best results with JB bore paste. Gets everything out.

[callturner]

I have used Lee Shavers barrel break in method and had very good results and very little copper or leading problems. Hope this link works. https://www.modernmuzzleloader.com/threads/lee-shaver%E2%80%99s-barrel-break-in.33040/

[Magnum_Willys]

I get the best results with JB bore paste. Gets everything out.

Ooooh thats pretty !  How many rounds through it?

[dmoua]

I get the best results with JB bore paste. Gets everything out.

Ooooh thats pretty !  How many rounds through it?

I clean every 100 rounds. This barrel has around 450 rounds down the pipe.