collapse

Advertisement


Author Topic: Koro Traps distributor  (Read 2880 times)

Offline Frank The Tank

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jan 2024
  • Posts: 77
  • Location: Pateros, WA
    • https://www.facebook.com/profile.php?id=61554952239658
  • Groups: Washington State Trapper Assoc, NRA, ITA
Koro Traps distributor
« on: June 18, 2024, 05:28:16 AM »
All,

I'm gauging interest in picking up distribution for Koro and feeling out the need for beaver suitcases, rat traps, spare parts etc.  If you have specific needs let me know as I'm looking to have a skid of stuff built and shipped and knowing what people need would be helpful.

Frank

Offline Loup Loup

  • Non-Hunting Topics
  • Trade Count: (+4)
  • Scout
  • ****
  • Join Date: Jan 2020
  • Posts: 495
  • Location: NCW
  • Groups: WSTA, ITA, Intermountain Fur Harvesters, F4WM
Re: Koro Traps distributor
« Reply #1 on: June 18, 2024, 07:43:42 AM »
I’d get a few springs for the suitcase traps. Youll only get a call for one bout every 5 years, but you’d have some for your customer. No where else to get them.
George had the printed instructions from Hancock on how to disassemble and reassemble the trap when replacing a spring. I don’t have mine anymore. Ask Koro if they’ve got anything like that. Makes the job “easier”.
Also some locks for the suitcase traps Koro sent out that they didn’t install locks on. George had half a bucket of locks that Koro sent out to give to people.

Offline Frank The Tank

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jan 2024
  • Posts: 77
  • Location: Pateros, WA
    • https://www.facebook.com/profile.php?id=61554952239658
  • Groups: Washington State Trapper Assoc, NRA, ITA
Re: Koro Traps distributor
« Reply #2 on: June 20, 2024, 11:17:07 PM »
I’d get a few springs for the suitcase traps. Youll only get a call for one bout every 5 years, but you’d have some for your customer. No where else to get them.
George had the printed instructions from Hancock on how to disassemble and reassemble the trap when replacing a spring. I don’t have mine anymore. Ask Koro if they’ve got anything like that. Makes the job “easier”.
Also some locks for the suitcase traps Koro sent out that they didn’t install locks on. George had half a bucket of locks that Koro sent out to give to people.

Good to know-thanks!

Offline UrbanTrapper

  • Life Member: NRA, SCI, DSC, NTA, WSTA, ITA, ATA
  • WA State Trappers Association
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jan 2012
  • Posts: 402
  • Location: Seattle or Kittitas County
  • Groups: NRA, SCI, WWC, HHC, NTA, WSTA
Re: Koro Traps distributor
« Reply #3 on: June 29, 2024, 10:38:21 PM »
I agree with Eric that you should get some springs.  Also get some of the chain link fence baskets, they eventually rust through and I've even lost a coupe to animal-rights outlaws who cut through them to release beavers. Ask Koro to use better rivets on the A-frames.  I have a couple of Koros where EVERY rivet has been replaced. 

Offline Loup Loup

  • Non-Hunting Topics
  • Trade Count: (+4)
  • Scout
  • ****
  • Join Date: Jan 2020
  • Posts: 495
  • Location: NCW
  • Groups: WSTA, ITA, Intermountain Fur Harvesters, F4WM
Re: Koro Traps distributor
« Reply #4 on: June 30, 2024, 08:49:54 AM »
I got my first suitcase trap in 1999. A Hancock. It has broken one spring, but other than that has been problem free. Since then I’ve acquired 6 Koros. 4 of the 6 Koros have beat them selves apart over the years. Broken rivets. You remind me, Urban Trapper that I need to look them all over this summer.

Offline Trapper John

  • Trade Count: (+6)
  • Sourdough
  • *****
  • Join Date: Jan 2012
  • Posts: 1514
  • Location: Monroe, WA
  • Groups: Life member of: WSTA, NTA, ITA, NRA also member of FTA, F4WM
Re: Koro Traps distributor
« Reply #5 on: June 30, 2024, 01:30:16 PM »

Frank,
IMO I would get Hancock traps.  Personally, I wouldn't invest any money in Koro suitcase Traps, I think their junk and way too many problems.
I've been using Hancock Beaver traps for almost 40 years know.  I purchased a have dozen off of Chuck VanDyke years ago because he was selling out, that is when I found out you couldn't sell me another one.  I sold them all.

Talk with Hancock and like Eric said, pick up a set of springs and I would also pick up a couple extra pans too.
JC 



Offline Frank The Tank

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jan 2024
  • Posts: 77
  • Location: Pateros, WA
    • https://www.facebook.com/profile.php?id=61554952239658
  • Groups: Washington State Trapper Assoc, NRA, ITA
Re: Koro Traps distributor
« Reply #6 on: July 01, 2024, 11:23:36 PM »
I agree with Eric that you should get some springs.  Also get some of the chain link fence baskets, they eventually rust through and I've even lost a coupe to animal-rights outlaws who cut through them to release beavers. Ask Koro to use better rivets on the A-frames.  I have a couple of Koros where EVERY rivet has been replaced.
OK I'll make that a point

Offline Frank The Tank

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jan 2024
  • Posts: 77
  • Location: Pateros, WA
    • https://www.facebook.com/profile.php?id=61554952239658
  • Groups: Washington State Trapper Assoc, NRA, ITA
Re: Koro Traps distributor
« Reply #7 on: July 01, 2024, 11:24:22 PM »
I got my first suitcase trap in 1999. A Hancock. It has broken one spring, but other than that has been problem free. Since then I’ve acquired 6 Koros. 4 of the 6 Koros have beat them selves apart over the years. Broken rivets. You remind me, Urban Trapper that I need to look them all over this summer.
Good feedback and I'll pass this along

Offline Frank The Tank

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jan 2024
  • Posts: 77
  • Location: Pateros, WA
    • https://www.facebook.com/profile.php?id=61554952239658
  • Groups: Washington State Trapper Assoc, NRA, ITA
Re: Koro Traps distributor
« Reply #8 on: July 01, 2024, 11:28:11 PM »

Frank,
IMO I would get Hancock traps.  Personally, I wouldn't invest any money in Koro suitcase Traps, I think their junk and way too many problems.
I've been using Hancock Beaver traps for almost 40 years know.  I purchased a have dozen off of Chuck VanDyke years ago because he was selling out, that is when I found out you couldn't sell me another one.  I sold them all.

Talk with Hancock and like Eric said, pick up a set of springs and I would also pick up a couple extra pans too.
JC
I'm with you. The problem I have is that Hancock communication, delays, shipping, even invoicing, support is sorely lacking.  I don't know how I could get parts/traps, much less at a rate where I could even break even, less at a decent timeframe.  I don't feel like driving to South Dakota just to pick a truckload up.

Offline Frank The Tank

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jan 2024
  • Posts: 77
  • Location: Pateros, WA
    • https://www.facebook.com/profile.php?id=61554952239658
  • Groups: Washington State Trapper Assoc, NRA, ITA
Re: Koro Traps distributor
« Reply #9 on: July 08, 2024, 08:50:36 AM »

Frank,
IMO I would get Hancock traps.  Personally, I wouldn't invest any money in Koro suitcase Traps, I think their junk and way too many problems.
I've been using Hancock Beaver traps for almost 40 years know.  I purchased a have dozen off of Chuck VanDyke years ago because he was selling out, that is when I found out you couldn't sell me another one.  I sold them all.

Talk with Hancock and like Eric said, pick up a set of springs and I would also pick up a couple extra pans too.
JC

Hey JC, what specific problems would you have? I agree with you on Hancocks.  waiting for a call back from Weaver.........

Offline UrbanTrapper

  • Life Member: NRA, SCI, DSC, NTA, WSTA, ITA, ATA
  • WA State Trappers Association
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jan 2012
  • Posts: 402
  • Location: Seattle or Kittitas County
  • Groups: NRA, SCI, WWC, HHC, NTA, WSTA
Re: Koro Traps distributor
« Reply #10 on: July 09, 2024, 10:24:41 AM »

Frank,
IMO I would get Hancock traps.  Personally, I wouldn't invest any money in Koro suitcase Traps, I think their junk and way too many problems.
I've been using Hancock Beaver traps for almost 40 years know.  I purchased a have dozen off of Chuck VanDyke years ago because he was selling out, that is when I found out you couldn't sell me another one.  I sold them all.

Talk with Hancock and like Eric said, pick up a set of springs and I would also pick up a couple extra pans too.
JC

John, I wouldn't say that Koro traps are "junk" at all.  If I can get a good deal, I'll buy any used Koros anyone wants to get rid of. If Frank becomes a Koro distributor, it will help me.  Both Koro and Hancock traps have their pros and cons. 

 


* Advertisement

* Recent Topics

Results of 3 point or better rule by Jonathan_S
[Yesterday at 09:39:12 PM]


Custom Laminate Design Handcalls by rainshadow1
[Yesterday at 09:24:48 PM]


Another reloading newb question by jrebel
[Yesterday at 09:23:43 PM]


blacktail deer bait by kodiak06
[Yesterday at 09:09:21 PM]


Unique way to get a pair by MADMAX
[Yesterday at 08:26:14 PM]


NE Wolf documentary by Birdguy
[Yesterday at 07:40:46 PM]


Fencelines by Sitka_Blacktail
[Yesterday at 06:44:05 PM]


Bills to relocate Bib Oke and continue pheasant release programs by Torrent50
[Yesterday at 06:16:38 PM]


Please Report Problems & Bugs Here by Buckmark
[Yesterday at 05:16:23 PM]


First time coyote hunting by 762Gunner
[Yesterday at 05:11:22 PM]


Wishlist by String Bender
[Yesterday at 03:56:45 PM]


turkey hunting question series - question 2 by brokentrail
[Yesterday at 03:24:27 PM]


Alpine Lakes Bear Hunt Thoughts by chasethedevil
[Yesterday at 01:54:02 PM]


Wyoming 2026, who's in? by dvolmer
[Yesterday at 01:51:02 PM]


End of Western WA Pheasant Release Program by EnglishSetter
[Yesterday at 12:55:25 PM]


Boys coho catch fall ‘25 by AL WORRELLS KID
[Yesterday at 11:49:59 AM]


Family Hunt Club by EnglishSetter
[Yesterday at 10:35:07 AM]


Pheasant Release Program by WSU
[Yesterday at 09:24:22 AM]


Leopard Cur Pups by Machias
[Yesterday at 08:16:47 AM]


Is this 1903 Remington finish original? by swanderek
[Yesterday at 07:38:59 AM]

SimplePortal 2.3.7 © 2008-2026, SimplePortal